Used line Tetra pak overhauled TBA 19 200 ml slim

Tetra Pak®

Condition: used, Year of construction: 2014, operating hours: 180 h, machine/vehicle number: FA54, Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour Introduction to the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour This machine is a used shrink wrapper model 32, manufactured by Tetra Pak in 2014. It handles the secondary packaging of aseptic carton containers, which manufacturers commonly use for liquid food products. Currently, operators have stored the unit, and they classify it as fully automatic, featuring a straight-line feed system. Moreover, it has only 180 hours of operation, which ensures minimal wear and high reliability. In terms of productivity, the machine reaches a performance level of 9,000 bricks per hour. Supported package configurations The Shrink Wrapper 32 offers a high degree of flexibility in terms of package configurations. Consequently, it adapts well to a variety of operational setups. It supports multiple layouts, including 3×1, 3×2, 3×3, 4×1, 4×2, 4×3, 5×1, 5×2, and even the Straw configuration for packs with pre-applied straws.As a result, this versatility makes the machine suitable for integration into modern, high-capacity Tetra Pak filling lines. Furthermore, it enables seamless transitions between different packaging formats without compromising efficiency. Compatibility with the 200 ml EDGE format This model works specifically with the Tetra Pak EDGE 200 ml format, which remains a standard choice for juices, dairy, and ready-to-drink products. In addition, the EDGE format requires both precision handling and consistent film application—criteria the Shrink Wrapper 32 fulfills reliably.Therefore, by combining this format with the various supported configurations, operators can address a wide range of packaging needs. Additionally, this compatibility enhances line flexibility and product presentation.As a result, the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour serves as a high-performing option for technical teams aiming to maintain speed and versatility. Nlodpfx Ao Adyxvedljh Operating features and safety systems of the Used Shrink Wrapper Tetra Pak The system opera...

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 8,000 kg, type of input current: AC, Equipment: documentation/manual, Curd pre-pressing vat with a capacity of 12,000 litres and filling station cheese moulds from Tetra Pak Tebel. Year of manufacture 1999. In good condition, but with obsolete automation/PCL. We can provide PLC replacement and refurbishment on request. Available to visit. Documentation available. Nledpfxoulnrvs Adljh

Condition: used, Year of construction: 2004, operating hours: 51,870 h, machine/vehicle number: LC692, Used Tetra Pak TBA19 200 slim V020 line, 7500 PPHTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak TBA 19 200 Slim V020 aseptic carton filling line for industrial packaging and juice beverage production. Manufactured in 2004, the line is configured for the 200 Slim carton format and includes a straw applicator for complete retail-ready package preparation.Manufacturer: Tetra PakModel: TBA 19 200 Slim V020Year: 2004Production speed: 7,500Package format: 200 SlimProcessed product: JuiceOperating hours: 51,870Included equipment: Straw applicatorAdvanced Automation & Control SystemsThe TBA 19 platform is designed for automated carton handling, forming, filling and sealing within a continuous beverage production process. The line is supplied with its complete paper documentation, supporting operation, service activities and technical reference. Electrical configuration and installed power follow the standard European TBA 19 line arrangement.The integrated straw applicator supports automated application of drinking straws to compatible 200 Slim cartons, helping prepare finished packs for downstream industrial packaging operations.Production Line Integration CapabilitiesThis second hand Tetra Pak carton filling line is suited to integration with upstream juice preparation and product supply systems, as well as downstream carton conveying, accumulation and secondary packaging equipment. It is configured as a compact filling and pack-completion solution for 200 Slim juice cartons.Machine type/categoryManufacturer/modelYearFilling MachineTetra Pak TBA 19 200 Slim V0202004Various EquipmentStraw applicatorMachines of this type typically operate as part of an aseptic carton packaging line, with conveyors and accumulation equipment coordinated to maintain a steady flow between filling and final packing stages.Machine Condition & Maintenance HistoryThe line is in operation and reported in very good condition. Recorded operating hours are 51,870. Regular Tetra Pak service has been performed at 500-hour and 2,000-hour intervals. No modifications or upgrades are reported, and spare parts are available.Operational Performance & VersatilityConfigured for juice production, this Tetra Pak filling line handles 200 Slim carton packs and incorporates straw application for consumer convenience. The format-specific configuration makes it suitable for producers seeking a used bottling line for carton-based beverage production and industrial packaging where a compact retail format is required.... Nodpfx Ade Adtr Nololh

Condition: used, Year of construction: 2005, machine/vehicle number: LC671, Used Tetra Pak A3 flex 100V 330 prismaTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak aseptic carton filling and packaging solution configured for 330 ml Prisma cartons. The central filling machine is a Tetra Pak A3 FLEX 100V, built in 2005, designed for Brik carton handling with a pull-tab configuration. The line also includes a new Tetra Pak Cap 30 FLEX cap applicator, built in 2026, configured for 330 ml Prisma cartons with Dream Cap closures.Filling machine: Tetra Pak A3 FLEX 100VFiller year: 2005Carton format: 330 ml PrismaCarton type: Brik cartonClosure configurations: pull tab and Dream CapCap applicator: Tetra Pak Cap 30 FLEX, built in 2026OPTIONAL: Accumulator ACHX30 - 2010, 14713H Advanced Automation & Control SystemsThe equipment features an integrated operator HMI/control panel, electrical control cabinet, pneumatic service components, mechanical drives and adjustable machine mechanisms. The filling and cap-application stations are intended to operate as coordinated industrial packaging equipment, supporting controlled handling of carton material, carton formation, filling, closing and downstream transfer. Operator access areas include service platforms, stairs and access panels for operation and maintenance activities.Production Line Integration CapabilitiesThis complete aseptic carton line is arranged around the filling machine and cap application process for 330 ml Prisma Brik cartons. It can be integrated with product preparation, upstream aseptic processing and downstream industrial packaging machinery according to the intended beverage production layout. An optional accumulator is available to provide carton buffering between line sections and help maintain production continuity during downstream interruptions.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX 100V2005Capping MachineTetra Pak Cap 30 FLEX2026Accumulation SystemACHX302010Machine Condition & Maintenance HistoryThe line includes a used Tetra Pak A3 FLEX 100V filler built in 2005 and a new Tetra Pak Cap 30 FLEX cap applicator built in 2026. The optional used ACHX30 accumulator was built in 2010 and records 14,713.8 running hours. The stainless-steel enclosure, service platform, access ladder, pneumatic tubing, conveyor or product-transfer sections and machine adjustment components are visible on the equipment.Operational Performance & VersatilityThe Tetra Pak aseptic carton filling s... Nedpfozw Dvnox Adlelh

Condition: good (used), APV Curd Master type Double-O, capacity 20.000 l, Njdjlu Hbajpfx Adlslh Double jacketed, Insulated, Curd master with agitators Double-O. Good working condition! Without control unit.

Condition: used, Year of construction: 2006, operating hours: 62,000 h, machine/vehicle number: R78, Technical Specifications & Performance DataThe Used filling machine TETRA PAK A3 Flex 1L slim 7500 bph is a 2006 aseptic form‑fill‑seal system designed for high-efficiency beverage production in cartons. Built by Tetra Pak®, it delivers precise, reliable filling for dairy and juice in Tetra Brik formats, making it a strong fit for industrial packaging operations seeking predictable uptime and hygienic performance.* Manufacturer: Tetra Pak®* Model: A3 Flex (Year 2006)* Category: Filling Machine – aseptic carton FFS* Nominal speed: up to 7,500 packs/hour* Machien Hours: 62.000 Hours* Container type: Brik (aseptic carton); format range subject to installed tooling* Product compatibility: Dairy (e.g., UHT milk), Juice (with/without pulp, low to medium viscosity)* Filling principle: Aseptic, volumetric dosing* No. of valves / heads: 1* Machine configuration: Linear (rotation: 0)* Changeover: Recipe-based format adjustments to minimize downtime* Safety features: Integrated guarding and interlocks* Documentation: Operator and technical manuals availableAdvanced Automation & Control SystemsFully PLC-controlled with an HMI interface, the A3 Flex provides recipe management, alarm diagnostics, and batch logging for robust traceability. The control platform supports connectivity with plant SCADA/MES for data acquisition and performance monitoring. Standardized I/O facilitates integration with upstream UHT/sterilization and downstream end-of-line equipment. Built-in safety circuits, interlocked doors, and emergency stops help protect operators during rinsing, filling, and downstream handling processes. Electrical and pneumatic interfaces are designed for common EU industrial standards.Production Line Integration CapabilitiesThis machine integrates seamlessly within a used bottling line or mixed packaging environment. It interfaces with upstream product treatment (UHT, homogenization, CIP/SIP) and downstream carton conveyors, checkweighers, inkjet date coders, case packers, and palletizers. While dedicated to cartons, it can share utilities, controls, and data infrastructure alongside parallel PET, glass, or aluminum can lines that include rinsing, filling, capping, and labeling machines. Format changes within the Brik family are completed via guided procedures and recipes to reduce changeover time and waste.Machine Condition & Maintenance HistoryCurrent status: UNDER MAINTENANCE. This second hand Tetra Pak A3 Flex is undergoing scheduled servicing to verify aseptic integrity, dosing accuracy, and sealing performance. Key wear parts are inspected and replaced as required. As part of the A3Flex-100V Upgrade, the machine was enhanced with the addition of 1 AB CPU, 2 AB network modules, 1 AB input module, 1 AB output module and 1 GE communication module. The equipment was upgraded from Danaher servo to AB’s latest servo, with 7 Danaher motors replaced by AB motors, together with network cables, communication cables, connectors and 2 pull ear motor bases. Maintenance logs, test reports, and commissioning checklists can be provided. Manuals are included to support rapid start-up and operator training.Automation and Servo Upgrade: The equipment has been upgraded from... Njdpfj Adt S Aex Adljlh

Condition: used, Year of construction: 2011, operating hours: 14,000 h, machine/vehicle number: LC660, Used Tetra Pak A3 speed 030V 200 slim Filling lineTechnical Specifications & Performance DataThis complete used bottling line is a Tetra Pak A3 Speed (030V) configuration dedicated to 200 ml Slim cartons. It is a second hand, overhauled industrial packaging solution engineered for consistent performance in beverage production. All core components are manufactured by Tetra Pak for seamless compatibility and robust uptime.Main filler: Tetra Pak A3 Speed (030V), year 2011Container format: 200 ml Slim cartons (0.2L)Production capacity: 24,000 packs/hourRecorded hours: Filler 25,731 h; Accumulator 1,609 h; Straw applicator 14,219 h; Case packer 21,065 hLine status: Used and overhauledManufacturer: Tetra Pak (all included machines)Container type: Carton (brick-style)Included models: A3 Speed 030V filler; ACHX 30 accumulator; SA30 straw applicator; CBP30 Speed case packerAdvanced Automation & Control SystemsThe line benefits from Tetra Pak’s integrated automation philosophy, bringing reliable controls, intuitive operation, and coordinated start/stop logic across the equipment set. Operator interfaces provide clear status visualization, guided changeovers for the 200 ml Slim format, and recipe-based parameter management. Safety interlocks and guarded access points help protect operators while maintaining fast serviceability. The coordinated control across filler, applicator, accumulator, and packer reduces bottlenecks and supports stable high-speed operation in demanding packaging environments.Production Line Integration CapabilitiesDesigned for inline operation, this packaging machinery set delivers smooth product flow from filling through secondary packaging. The accumulator supports continuous production by buffering short downstream stops, while the straw applicator and case packer complete the distribution-ready presentation. The system can interface with upstream and downstream conveyors, printers, and palletizing solutions to form a complete production line.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed 030V2011Straw ApplicatorTetra Pak SA302011Accumulation SystemTetra Pak ACHX 302011Case PackerTetra Pak CBP30 Speed2011Machine Condition & Maintenance HistoryThis second hand Tetra Pak used bottling line has been overhauled and is presented in working con... Nljdpfx Aj Adtx Asdljh

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Nodpfozzd Dmsx Adlslh Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: used, Year of construction: 2005, operating hours: 16,412 h, machine/vehicle number: R96, Used Tetra Pak A3Flex 1000 Base - Year 2005Technical Specifications & Performance DataThe Tetra Pak A3/Flex 1000 Base is an aseptic carton filling machine designed for industrial packaging and beverage production. It forms, fills and seals carton packs in a controlled filling process, supporting efficient integration into an aseptic carton packaging operation.Manufacturer: Tetra PakModel: A3/Flex 1000 BaseDrawing specification: 648576-0100Year of manufacture: 2005Advanced Automation & Control SystemsThis filling machine is intended for automated carton handling, forming, filling and sealing within an industrial packaging line. The A3/Flex platform supports coordinated operation with upstream product preparation and downstream conveying, packing and coding equipment.Production Line Integration CapabilitiesSuitable for use as the central filling station in an aseptic carton production line, this machine can be integrated with carton handling conveyors, accumulation systems, secondary packaging machinery and line control equipment. Aseptic carton filling technology is widely applied in beverage production and other liquid-food packaging operations where sealed carton packs are required.The machine can be positioned downstream of product processing and upstream of conveying, coding and final packaging equipment. Integration should account for product supply, carton material handling, discharge conveyors and synchronization with downstream industrial packaging machinery.Machine Condition & Maintenance HistorySpare parts will be replaced as needed. This maintenance approach supports continued machine serviceability and helps maintain operational readiness for a second hand aseptic filling installation.Operational Performance & VersatilityThe Tetra Pak A3/Flex 1000 Base is built for automated carton filling applications. As part of a used bottling line or carton packaging operation, this type of equipment provides a dedicated solution for producing filled and sealed carton packs while supporting consistent handling through the filling and discharge stages.Installation Requirements & Site PreparationInstallation requires a suitably prepared production area with access for product feeding, packaging-material supply, electrical connection and discharge conveyor integration. Site planning should also allow adequate access for operation, cleaning, maintenance and replacement of service parts.Safety Standards & Compliance CertificationSafe installation and operation require the machine to be integrated with appropriate guards, operator access controls and emergency-stop provisions for the complete production line. Before commissioning, all safety devices, utility connections and hygiene-related operating procedures should be checked as part of the site acceptance process. Nodpfx Ado Adttysljlh

Condition: used, Year of construction: 2005, machine/vehicle number: LC688, Used Tetra Pak A3 Flex 1000 SQ filling line 7000 PPHTechnical Specifications & Performance DataThis used Tetra Pak A3 FLEX 1000SQ filling line is designed for industrial packaging and beverage production in carton packages. The main filling machine was manufactured in 2005 and is configured for the 1000SQ format, with a production capacity of 7000 packages per hour. The filler has been upgraded from 100V to 300V.Main filling machine: Tetra Pak A3 FLEXMain format: 1000SQAdditional format capability: 500SQ through a quick change kitProduction capacity: 7.000 packages per hourIncluded accessories: 2 paper reels and 1 paper trolleyAdvanced Automation & Control SystemsThe line is arranged as an integrated carton filling and packaging system. Its format-specific configuration supports coordinated operation between the filler, cap applicator, accumulation equipment and cardboard packing section. The A3 FLEX filler upgrade from 100V to 300V is part of the documented machine configuration.Production Line Integration CapabilitiesThis complete bottling line is configured for carton-package production, with equipment supporting filling, cap application, product accumulation and secondary cardboard packing. The 1000SQ format is the principal operating format, while the supplied quick change kit supports conversion to 500SQ. The ACHX30-50M accumulator is suitable for both 1000SQ and 500SQ formats, helping maintain flow between filling and downstream packaging operations.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX2005Capping MachineTetra Pak CAP30 FLEX2013Various EquipmentTetra Pak ACHX30-50M2015Case PackerTetra Pak CBP322008Various EquipmentPaper Reel TrolleyMachine Condition & Maintenance HistoryThe equipment is identified as used. The documented line includes components manufactured between 2005 and 2015, including the main A3 FLEX filler, the ACHX30-50M accumulator, the CAP30 FLEX cap applicator and the CBP32 cardboard packer. Used bottling line buyers can assess the individual machine configuration, installed formats and supplied accessories when planning recommissioning and integration.Operational Performance & VersatilityThe line is suited to carton filling applications requiring a 1000SQ package format and can be adapted for 500SQ operation with the included quick change kit. The C... Nsdpfxo Adttmo Adlolh

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Nodpfow Rn S Ujx Adljlh

Condition: used, Year of construction: 2005, machine/vehicle number: LC689, Used Tetra Pak A3 Flex 200S, 100V filling lineTechnical Specifications & Performance DataThis used Tetra Pak A3 Flex filling line is configured for the 200S carton format and is centered on a Tetra Pak A3 Flex 100V filling machine manufactured in 2005. The line includes coordinated downstream equipment for carton handling, straw application and cardboard secondary packaging.Filler: Tetra Pak A3 Flex, version 100V, year 2005Line format: 200SAccumulator: Tetra Pak ACHX30-50M, year 2010Straw applicator: Tetra Pak SA22, year 2009Cardboard packer: Tetra Pak CBP32, year 2009Included accessories: 2 paper reels and 1 paper trolley supplied with the fillerAdvanced Automation & Control SystemsThe filling line is arranged as an integrated industrial packaging system, with the accumulator supporting product flow between filling and downstream operations. The equipment configuration is intended to coordinate filling, carton handling, straw application and cardboard packing within a continuous production process.The Tetra Pak A3 Flex filler is identified as version 100V, with the possibility of an upgrade to 150V. Any upgrade scope should be assessed against the required packaging configuration and operating requirements.Production Line Integration CapabilitiesThis Tetra Pak carton filling line combines the principal stages required after carton filling: buffering, straw application and secondary cardboard packaging. The included paper reels and paper trolley support the handling and loading of packaging material for the filler.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 Flex 100V2005Various EquipmentTetra Pak ACHX30-50M2010Various EquipmentPaper ReelVarious EquipmentPaper TrolleyVarious EquipmentTetra Pak SA222009Case PackerTetra Pak CBP322009The modular arrangement makes this second hand filling and industrial packaging line relevant for beverage production applications using the specified 200S carton format. It can be integrated with suitable upstream product preparation and downstream end-of-line handling equipment according to plant requirements.Machine Condition & Maintenance Histor... Nljdj Adttaspfx Adleh

Condition: used, Year of construction: 2005, operating hours: 22,000 h, machine/vehicle number: TP130, Used Tetra Pak TCAP 45 2005 1000SQ Helicap 27Technical Specifications & Performance DataThe Tetra Pak Tetra Cap Applicator 45 is an industrial capping machine designed for the application of caps on carton packs within beverage production and industrial packaging operations. Manufactured in 2005, this second hand machine is configured for a production speed of up to 7,000 pph and currently operates with the 1.000 Prisma SQ format.Manufacturer: Tetra PakModel: 45Year: 2005Production speed: 7,000 pphCurrent format: 1.000 Prisma SQCurrent cap format: Slim capAlternative cap format: HeliCap 27Dimensions: 4250 x 2545 x 2660 mmWeight: 1200 kgAdvanced Automation & Control SystemsThis capping machine is intended for synchronized inline operation, applying caps consistently to packs supplied from an upstream filling machine. Its operating configuration supports stable handling of the current Prisma SQ format and provides the possibility of conversion to the HeliCap 27 cap format. Electrical supply requirements are 400V and 50Hz.Electrical supply: 400V, 50HzCompressed-air consumption: 300 Nl/min at 5.5 BarDocumentation: Paper documentation includedProduction Line Integration CapabilitiesThe Tetra Cap Applicator 45 is suited to integration into a used bottling line or carton packaging line, positioned after the filling stage to apply caps before downstream handling and secondary packaging. It can support beverage production environments where carton packs require reliable cap application as part of a coordinated industrial packaging process. Integration should include compatible product conveyors, pack spacing, cap supply arrangements and line controls matched to the selected pack and closure format.The current setup is dedicated to the 1.000 Prisma SQ format with slim caps. A change to HeliCap 27 is possible, allowing the machine to be considered for production lines using this alternative cap style.Machine Condition & Maintenance HistoryThe machine is operational and has accumulated approximately 22,000 operating hours. This second hand Tetra Pak capping machine is supplied with paper documentation, supporting technical review, routine servicing and installation planning. Its operational condition makes it suitable for buyers seeking established bottling equipment for integration into an existing carton-pack production line.Operational Performance & VersatilityDesigned for cap application on Prisma SQ carton packs, the machine supports accurate closure placement at production speeds up to 7,000 pph. Capping machinery of this type plays an important role in maintaining pack usability and presentation by applying the selected closure format consistently before packs proceed to downstream packaging operations.The installed slim-cap configuration is complemented by the possibility of conversion to HeliCap 27. Format and cap-change work should be planned with appropriate compatible components an... Nodpfj Adtp Uex Adlelh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Complete Tetra Pak filling line TBA/19 TBA 200 Slim, including: Nodpszznpajfx Adlolh Filling machine TBA/19 TBA 200 Slim, Version 20V Straw Applicator Tetra Straw Applicator 21 Cardboard Packer TCBP 70 Year of manufacture: 2006 In working condition

Condition: used, Year of construction: 2001, operating hours: 26,000 h, machine/vehicle number: LC669, Used Tetra Pak TBA8 1000ml square V110, Helicap 27Technical Specifications & Performance DataThis used bottling line is configured around a Tetra Pak TBA 8 V110 filling machine for square 1.0L Brik carton packs. Manufactured approximately in 2001, the filling machine has approximately 26,000 working hours and received a total refurbishment in 2026. The line includes dedicated screw-cap application, wrap-around tray packing and interconnecting conveyor equipment for an integrated carton packaging process.Filling machine: Tetra Pak TBA 8 V110Pack format: square Brik carton, 1.0LYear of manufacture: approximately 2001Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Conveyors: approximately 30 metres, according to the standard layoutAdvanced Automation & Control SystemsThe line combines filling, cap application, conveying and tray packing into a coordinated industrial packaging arrangement. The Tetra Pak TCAP 45 cap applicator is modified for HeliCap 27 screw caps and operates with pre-punched paper, supporting the specified carton closure configuration. The conveyor system provides product transfer between the principal operating stations.Machines of this type are typically operated through dedicated machine controls and coordinated with upstream product preparation and downstream packing equipment. Functional verification, test running and inspection have been performed following refurbishment.Production Line Integration CapabilitiesThis complete carton filling and packaging line is designed for handling square 1.0L Brik packs. Its configuration supports a logical process flow from carton filling through screw-cap application, conveying and wrap-around tray packing. It is suitable for industrial packaging and beverage production applications using the stated carton format.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1102001Capping MachineTetra Pak TCAP 45Various EquipmentConveyor SystemWrap Around PackerTetra Pak TCBP 70The tray packer is configured for wrap-around tray applications, creating a practical downstream packaging stage for filled and capped carton packs. This arrangement can be considered for second hand carton packaging projects requiring a compact filling-to-secondary-packaging workflow.Machine Condition & Maintenance HistoryThe machines have been checked and are described as being ... Nlsdpfx Ajzwu Uhjdleh