Punching and Binding Machine

Swigraph E420C

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Lredpfx Aoxtau Eephst Min. book size 120x100 mm

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Lodpfxsh Agnus Aphert Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: good (used), Year of construction: 2010, machine/vehicle number: 2005, Automatic Perforating & Creasing machine Lrjdpfjy Txkbox Aphjt

Condition: used, Year of construction: 2008, functionality: fully functional, Edge folding machine with stop Programmable for up to 20 edge folds. Lrodpsy Uh Uxjfx Aphjt

Condition: used, functionality: fully functional, machine/vehicle number: Línea completa etiquetas, COMPLETE DIGITAL LABEL PRINTING AND FINISHING LINE The line includes: • BizPress 13R High-resolution LED toner CMYK digital label printer, ideal for short to medium runs and variable data printing. • SMAG E-CUT S330 Professional label finishing and converting system with lamination, semi-rotary die-cutting, slitting, and rewinding. • LabelCut R20s (ROTUTECH) Inspection, cutting, and finishing system for professional label production. Lrodpfey Uddvsx Aphot Complete line ready for professional adhesive label production. Ideal for: - label manufacturers - printing companies - industrial production - short to medium runs - variable data and personalization The machines are in very good working condition and can be seen in operation. Location: Spain For more information, videos, or additional photographs, please contact us.

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press Lsdpfx Apjxrb Nbjhjrt ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: used, Buchrückenrundemaschine - Book Back Rounding Machine La Fornigrafica Dorsi 500 Year 2005 Ledpfx Ajwhgcuophsrt Working width max. 500mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/hour Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: Lodpfx Apeum Hufjhert * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: good (used), Year of construction: 1998, Specifications: Maximum size 320 x 440 mm Minimum size 100 x 150 mm Max speed MX gathering machine 100 cycles/min Max stack height - Plus stacker 150 mm Consisting of: Gathering machine: Raccoglitrice MX - Hand feeding station - Number of gathering stations: 21 - Optical sheet control - Pump(s) - Distribution unit: MX Modulo - Colour monitor with touch screen - Distribution section into 3 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (2) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (3) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities Lrsdpfxezbu Uke Aphjt - Plus stacker - Including pump

Condition: good (used), Year of construction: 1999, functionality: fully functional, Aster Astronic 180, age 1999 Equipped with: • Automatic feeding with SISTEMA • Opticontrol Lrodpfx Apsztwpyohst • UniOP computer • Size max 420x320 mm • Capacity 180 C/min • Thread looping and trimming • Belt delivery with book block separation • In production