Stork dry breader

Stork

Condition: used, Year of construction: 2007, Manufacturer: Stork Model: TEM630 Kdjdpezfh Hmofx Acdon Year: 2007 Condition: Used Serial number: 10063138 Stock number: 2196P Bandwidth: 630 mm Power: 3 x 400V, 50Hz, 2kW Dimensions: 2100 x 1250 x 1500 mm Weight: 300 kg

Condition: used, Year of construction: 2007, Type: TSO600/96/4 TH Serial number: 10064051 Kjdpfxox Ttykj Acdsdn Year of constructon: 2007 Model: right hand execution Belt width: 600 mm Belt length: 96 m Tiers: 2 x 4 pc Heating: thermal oil, 400 kW at 180°C Steam: max 1500 kg/h Exhaust: Ø 252 mm, 1000 m³/h Compressed air: 6 - 8 Bar Cold water: 1 - 20°C, 3 m³/h Hot water: 20 - 60°C, 4 m³/h Power: 3 x 400V, 50Hz, 40kW Dimensions: 11040 x 4000 x 4975 mm Weight: 20000 kg With belt washer and CIP

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Kdjdjx Altfopfx Acdon

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN Kdsdoxwva Eopfx Acdsn - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: used, Year of construction: 2007, Model: TEM630 Year: 2007 Condition: Used Serial number: 10063138 Kedpfx Acoy Uwrmododn Stock number: 2196P Belt width: 630 mm Power: 3 x 400V, 50Hz, 2kW Dimensions: 2100 x 1250 x 1500 mm Weight: 300 kg

Condition: reconditioned (used), functionality: fully functional, Wheel Guide - MAREL / STORK 1. Wheel Guide OEM - 3887946 / 3887947 - complete diameter 970 mm T - 6" PRICE - 900 euro/piece Ksdpfx Ajzbbchocdedn 2. Wheel Guide OEM - 673325 / 4064994 - complete or plastic diameter 485 mm T - 6" PRICE - 165 euro/piece 3. Wheel Guide OEM - 684400 / 684547 / 684538 / 677576 / 684409 - complete or plastic diameter 485 mm T - 6" PRICE - 160 euro/piece If you require more detailed information, please contact us, and we will provide you with all the necessary details.

Condition: used, Year of construction: 1985, year of last overhaul: 2008, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Used / Overhauled Make: Stork Model/Type: RD-IV Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Heating system: Steam Included equipment: Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Suitable for textile rotary printing operations requiring reliable multi-color production. Kjdpfx Ajy A S Ryjcdedn MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Kdsdpfx Aey Szb Hjcdsn

Condition: good (used), Stainless impeller and housing Kdedpfxsn R D Tke Acdjn Manufacturer: STORK Pumpen Type: FRER 80-140 Overall dimensions: 1000 x 400 x 550 mm Throat sizes: DN80; DN80 Voltage: 400 V Electrical power: 5,5 kW

Condition: excellent (used), functionality: fully functional, Stork | Battering Machine / Coating Machine Manufacturer: Stork Device Type: Battering Machine / Coating Machine Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 3000 × 1100 × 1730 mm Construction: Stainless steel (acid-resistant) This industrial coating machine from Stork is designed for the automatic and uniform application of liquid batters (e.g., pancake batter, tempura, slurry) onto food products. The device is a key component in production lines that manufacture products such as nuggets, cutlets, fish sticks, schnitzels, and various types of snacks and molded products. Thanks to its universal mesh belt with a working width of up to 600 mm, the machine ensures high throughput and works perfectly with industrial formers, dry battering machines, and frying tunnels (fryers). Kjdpfey Uav Usx Acdsdn Key features: - Efficient coating system: A special design allows for precise coverage of the product with liquid batter from all sides (from below through immersion, from above through a liquid curtain), guaranteeing perfect consistency and excellent adhesion for subsequent dry battering. - System for removing excess liquid: The machine is equipped with a mechanism (e.g., air blast or vibration system) that effectively removes excess batter from the product, preventing drips and saving raw materials. - Parameter adjustment: The ability to adjust the belt speed makes it easy to synchronize the machine with the rest of the production line.