Piston compressor

Shamal K60

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 10000 mm - turning diameter over bed: 1550 mm - turning diameter over support: 1220 mm - turning diameter in bridge recess: 1880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers Gsdpfxova Ebno Ag Sebg - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm Gjdouhhzhepfx Ag Sobg throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm Gbedemxkdpopfx Ag Seg MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Gjdpsibwarefx Ag Sebg Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit !

Condition: used, Year of construction: 1996, drill diameter 3 - 50 mm Gbedpfxjp Raizs Ag Sog drilling length 500 mm lip angle 90 - 140 ° voltage 380 V weight of the machine ca. 120 kg dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Serial-No.: 76658

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Gbedpfexufbtox Ag Sjg Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: new, DRILL PRESS WITH BELT DRIVE DIGITAL DEPTH GAUGE, REVERSIBLE TABLE WITH INTEGRATED VISE AND SCORER LED LIGHT Quick-action keyless chuck 1 - 16 mm B18 CM 4 chuck attachment SUPPLIED. Drilling capacity on cast iron with Ø 32 mm pre-hole. Max drilling capacity on steel with pre-hole (s235jr) Ø 28 mm Continuous drilling capacity Ø 20 mm Morse taper 4 Spindle 1 - 16 mm B18 Approximate spindle speed (12) 150 - 2450 rpm Spindle stroke 120 mm Spindle sleeve ø 62 mm Column ø 92 mm Height 1720 mm Spindle-column distance 255 mm Distance from machine nose to table 700 mm Table dimensions 460 x 425 mm Distance machine nose-base 1220 mm Hollow 14 mm Clamp 210 x 165 mm Single-phase motor 230 V 50 Hz 1.5 kW Gbsdpfem E Uhwsx Ag Seg Net weight 135 kg Packaging dimensions 1415 x 655 x 320 h mm Gross weight 158.00 kg

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure piston compressor with associated pressure vessel and control cabinet Gbsdpfx Aski Tzuog Sjg Type: QTOX 120/65/35 WM-W Max. final pressure: 66 bar Volume flow: 50m³/h Nominal power: 18.5kW Nominal speed: 1450min Voltage/frequency: 400/50V/Hz Year of construction:2000 Maschinen- und Behälterbau GmbH High pressure tank up to 65bar Type MB 00320-2,10 1000 liters Year of construction:2017

Year of construction: 2008, condition: excellent (used), Elektromotor 7,5 Kw 1445 Ford Leroy Somer LS132MT mehr zu verkaufen Seriennummer: ctm: 165 Leistung: 7,5 kW Drehzahl: 1445,-/min 400 V 50 Hz 15, 40 A Wellendurchmesser: 34mm doppelte Riemenscheibe Stummelschaftlänge: 90 mm Fußloch: Gsdpfxohr Uw So Ag Sobg Länge: 140mm Wind: 220mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2006, functionality: fully functional, pressure: 2,250 bar, fuel: electricity, power: 75 kW (101.97 HP), water pressure: 2,250 bar, pump capacity: 16 l/min, Electric driven ultra high pressure waterblasting unit 400V-50Hz 440V-60Hz 2250 bar at 16 ltr/min (32,000 psi at 4.2 USGPM) Gedpjw Rq Dajfx Ag Ssbg - frequency converter - automatic pressure regulation - pneumatic by-pass