Imagesetter

Screen/AGFA PT-R4600E/Avalon N4-30E

Condition: used, Year of construction: 2002, - Light source: 16-channel infrared laser diodes - Minimum plate size: 324 x 370 mm - Maximum plate size: 830 x 660 mm - Resolution: 2400/2438/2540 dpi - Media type: infrared thermal plates - Media thickness: 0.15 to 0.3 mm - Productivity: 10 plates per hour at 2400 dpi - Dimensions: 1750 x 1030 x 1178 mm - Weight: 645 kg Hodpfx Aewv D Dxjf Usi

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 65951607, color channels: 4, paper weight (min.): 60 g/m², paper weight (max.): 500 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 400 V, Koenig Bauer / KBA Rapida SRO 4 | 1988 | Offset printing machine Year: 1988 Format: 52x72 cm Colours - 4‑colour offset Speed -12,000 sheets/hour Paper Weight - 60–500 g/m² Feeder - Mabeg (± Technotrans) Hedpowzt Ttjfx Af Uoi Inking Adjustment - Colortronic remote key Dampening - Technotrans / Varidamp (alcohol) Dryer - Infrared Powder Spray - Weko Cooling - Baldwin Cylinders Chromium-plated

Year of construction: 2022, condition: used, Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Compressed air: 5–40°C Noise level: 82 dB(A) Color: Grey RAL 7035 Materials to be slit: • Paper-/liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder for lifting parent rolls from the floor. • Two motors driving the unwind roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3") cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6") cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway, enabling web threading at floor level while maintaining full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: Hodpoxx Tbcsfx Af Uji A slitting station with individual pneumatic knives and circular counter-knives: • Shear cutting performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • Separator roller, driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on processed materials). • Pressure is adjustable and synchronized with the winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a linear transverse knife and backing plate for securing the web to new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a central system or container (not included). Rewinding section: • Motorized turret (two-position) with two rewinding shafts. • Rewinding shaft drive via oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, featuring full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips and individual bladders.

Condition: good (used), Year of construction: 2009, – Thermal CTP – Light source: 16-channel infrared laser diodes – Screen 4300 E single cassette loader – Stacker MDT 260 compact Hjdpfx Afox R Ugte Usi – Includes Fuji-RIP & PC Min. format: 304 x 370 mm Max. format: 660 x 830 mm Plate thickness: 0.15-0.30 mm Plates per hour: 11 at 2,400 dpi

Condition: used, For export only! Agfa Acento E, 16 diodes, HQ-RIP V7 Hedsyf Hd Espfx Af Uji

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Hodsxc Uv Aepfx Af Uji

Condition: ready for operation (used), functionality: fully functional, PMC MODEL 200 die cutting machine. Max label size 178 x 203 mm Min label size 25 x 50 mm trim margin 3 mm Hsdpfx Asw I Sifef Uji stack height 102 mm labels per hour , up to 1,200,00 Electrical requirements 3,5 kva shipping weight 700 kg Price under request

Condition: excellent (used), Fully functional equipment with all options km c6085 COUNTER COLOR Hjdsymgv Ropfx Af Uoi 5.255.250 BLACK 306929

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,076 h, load capacity: 3,500 kg, lifting height: 4,590 mm, free lift: 1,140 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,175 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, tire condition: 80 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), drive type: Diesel, Diesel forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Hodpfx Afjwwdl Ss Usi Rear tires type: Superelastic Rear tires condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, 3rd valve, rear work lights, front work lights, heater, STVZO approval, full cabin, beacon.