3D plastic printer

NEXA 3D NXE400

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, working width: 550 mm, area performance: 3,300 m²/h, overall weight: 235 kg, water tank capacity: 50 l, battery voltage: 24 V, The Kärcher B50 W Bp Pack 115Ah R55+Dose+Rinse+Autofill is a compact yet powerful scrubber-dryer equipped with numerous innovative features. It offers a stepless drive system, a detergent dosing system, automatic shut-off of the fresh water supply while filling, and a dirty water tank cleaning system. Additionally, the machine can be configured via app, and maintenance or support information can be accessed through it. The Kärcher B50 W features a robust roller brush deck, which provides the advantage of sweeping coarse debris, such as wood splinters, into a separate coarse dirt container. This ensures that suction performance is not compromised. It is suitable for daily cleaning of workshops, schools, sports halls, and similar facilities. Kljdpfx Adoxb A U Rj Njl Technical data: Working width: 550 mm Tank capacity: 50 litres / 50 litres (fresh/dirty water) Runtime: max. 2.5 hours Area coverage: 3,300 m²/h

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 937 h, 3D printer manufacturer 3D Systems Project 2500 plus Year of construction 2021 Total printing time 937 hrs. Kedpfxeuvinge Ad Nsll

Year of construction: 2007, condition: refurbished (used), GF AgieCharmilles Progress V3 Year of manufacture 2007 travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up Kljdpfxommfwuo Ad Nsl AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled by us after receipt of order. You will receive a warranty of 6 months on all machine parts. We are also happy to offer you commissioning and training

Condition: excellent (used), Year of construction: 2018, Traverses XYZ 1150 x 700 x 550mm, table size 1460 x 750mm, table load 1,500kgs, spindle speed 12,000 rpm, 20 station ATC, Siemens 840D control, swarf conveyor, and coolant. Kjdew Nq Hxjpfx Ad Nsll

Year of construction: 2006, condition: used, Quadruple big bag filling system with weighing device Klodsr Ai S Rjpfx Ad Nsl Dismantled in 2023 and overhauled in 2024. Plans and pictures on request!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 58 h, functionality: fully functional, The KIRA B 50 cleaning robot from Kärcher is a useful addition to any cleaning team. Intelligent, autonomous, and with the functionality of a scrubber-dryer, it efficiently handles floor cleaning of medium to large areas with consistent cleaning results, freeing up cleaning staff to focus on more demanding tasks. Kedpfx Adov Unlxj Noll

Condition: as good as new (ex-display), Exterior dimensions: Dia Ø 3600 mm Total H 11000 mm. Cylinder height: 10.200 mm. Vertical stainless steel tanks - 2 pcs. Conical bottom with 4" outlet. Kljdjicgn Topfx Ad Nsl Conical top with ventilation. Manhule at front of bottom. AISI 304. Can be delivered with 1-2 sidemounted agitators. Can be delivered with new isolation completed with optional plates.

Condition: excellent (used), HP Jet Fusion 540 3D Printer Model: VCVRA-1804 Printing technology: Multi Jet Fusion (MJF) Material: PA12 (polyamide) Build volume: 332 × 190 × 248 mm Layer thickness: 0.08 mm Resolution: 1200 dpi Print speed: up to 1817 cm³/h Print time (full build): 14–20 h Powder recovery: up to 80% Power: 6300 W Ksdpfjvu Spnjx Ad Nsll Power supply: 200–240 V, 50/60 Hz, 36 A Dimensions: 1565 × 955 × 1505 mm Weight: 650 kg (operational) Noise level: 72–80 dB Connectivity: Ethernet (Gigabit) Supported file formats: 3MF, STL, OBJ, VRML v2 Software: HP SmartStream 3D Build Manager, Command Center

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Kljdpfx Adeu Thkao Nel Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 Klsdpfx Ajwh Ri Esd Nel SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.