Cantilever rack

Meta

Condition: good (used), clear span: 2,700 mm, total length: 14,010 mm, total width: 1,100 mm, total height: 2,900 mm, load per truss pair (max.): 2,100 kg, Technical data for the pallet racking system: Racking system: META Thyssen Type: Multipal S Technical data for installation: Number of racking rows: 01 Length per racking row: approx. 14,010 mm Number of bays per racking row: 05, each 2,700 mm Number of levels, including the base level: 04 Technical data for capacity: Pallet spaces per bay: 09 Number of pallet spaces per row: 45 Total number of pallet spaces: 45 Gbedpfez I Tthox Ahdsu Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 700 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,900 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: yellow Profile dimensions: 100 x 50 mm Beam type: HN100|20 Agraffe: 3 HK Clear width: 2,700 mm Max. load per beam pair: 2,100 kg, with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shim plate, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Gbjdjx Ig Hmopfx Ahdeu Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: good (used), clear span: 2,700 mm, total length: 14,010 mm, total width: 1,100 mm, total height: 3,800 mm, load per truss pair (max.): 2,100 kg, Technical data for the pallet racking system: Racking system: META Thyssen Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 14,010 mm Number of bays per racking row: 05 units, each 2,700 mm Number of levels plus base level: 02 units Gbodpez I Tqtsfx Ahdju Technical data for the capacity: Pallet spaces per bay: 09 units Number of pallet spaces per row: 45 units Total number of pallet spaces: 45 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 700 kg Included in the scope of supply: 06x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 85 x 75 x 2.00 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 3,800 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: yellow Profile dimensions: 100 x 50 mm Beam type: HN|20 Agraffe: 3 HK Clear span: 2,700 mm Max. load per pair of beams 2,100 kg, with evenly distributed load 40x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal supports against unintentional lifting 24x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shims, used Material: Sendzimir galvanized For leveling the racking uprights when installed on uneven ground 01x Load sign with details of bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, load per truss pair (max.): 2,400 kg, Technical data for the pallet racking system: Racking system: META Thyssen Type: Multipal S Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 30,720 mm Number of bays per racking row: 11, each 2,700 mm Number of levels including base level: 2 Technical data for the volume: Pallet spaces per bay: 9 Number of pallet spaces per row: 99 Total number of pallet spaces: 99 Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 12x pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,000 mm high 1,100 mm deep 44x pallet racking beams, used Material color: yellow Profile dimensions: 100 x 50 mm Beam type: HN100|20 Agraffe: 3 HK Clear width: 2,700 mm Max. load per beam pair: 2,400 kg, with evenly distributed load 88x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 48x bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 24x leveling shims, used Material: Sendzimir galvanized Gedpfez I Tnfox Ahdobu For leveling the racking uprights that are installed on uneven ground 1x load sign With information on bay and rack load capacities, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Godpszru Nzofx Ahdobu Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: good (used), clear span: 2,700 mm, total length: 31,140 mm, total width: 1,100 mm, total height: 2,500 mm, load per truss pair (max.): 2,400 kg, Technical data for the pallet racking system: Racking system: META Thyssen Type: Multipal S Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 31,140 mm Number of bays per racking row: 11 bays, each 2,700 mm Number of levels including the base level: 02 Technical data for the capacity: Pallet spaces per bay: 09 Number of pallet spaces per row: 99 Total number of pallet spaces: 99 Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of supply: 12x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 120 x 75 x 2.00 mm Including cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 44x Pallet racking beams, used Material color: Yellow Profile dimensions: 100 x 50 mm Beam type: HN100|20 Connector: 3 HK Clear width: 2,700 mm Max. load per beam pair 2,400 kg, with evenly distributed load 88x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 48x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 24x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and order number Gbodpjz I Tfkefx Ahdeu Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,300 mm, total length: 37,320 mm, total width: 1,100 mm, total height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 1 unit Length per racking row: approx. 37,320 mm Number of bays per racking row: 11 units, each 3,300 mm Number of levels including base level: 02 units Included in the scope of supply: 12x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,200 mm high 1,100 mm deep 44x Pallet racking beams, used Material color: orange Beam type: HN100|20 Box profile: 100 x 50 mm Gedpfxsz I Sygs Ahdjbu Connector: 4 HK (hooks) Clear span: 3,300 mm 88x Safety pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting out 48x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 24x Shimming plate, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 2000, Offer 25521 Double-sided long goods – cantilever racking without contents Technical specifications: - 2 pieces of double-sided cantilever racking, each consisting of - 5 uprights with boltless system, height-adjustable storage arms Gbedox R Si Eepfx Ahdeu - Length per rack approx. 4150 mm - Total length approx. 9300 mm - 130 storage arms - Upright height each approx. 6000 mm - Width of upright + support arms approx. 1700 mm - Max. arm load approx. 400 kg - Max. load per upright approx. 5000 kg - Axle distance between rack sections connected with diagonals approx. 1.0 m - Increment for arm height adjustment 125 mm - Arm dimensions L 700 x W 90 x H 70 mm - Upright dimensions W 250 x H 100 mm - Weight per upright approx. 400 kg - Weight per arm approx. 10 kg

Condition: good (used), Technical data for the pallet racking upright: Racking system: META (Thyssen) Type: Multipal S Included in the scope of delivery: 1 x Pallet racking upright, used Material color: Sendzimir galvanized Upright type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Includes horizontal and diagonal braces and base plates Gjdjz I Sriopfx Ahdebu The uprights are pre-assembled (bolted frame) Height: 2,000 mm Depth: 1,100 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Technical data for the pallet racking upright: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 1x pallet racking upright, used Material color: Sendzimir galvanized Upright type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Includes horizontal and diagonal braces and base plates The uprights are pre-assembled (bolted frame) Height: 2,200 mm Depth: 1,100 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Gsdpfx Ahoz I Scnsdobu

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Godezrwhmspfx Ahdobu Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: good (used), Technical data for the pallet racking upright: Racking system: META (Thyssen) Type: Multipal S Included in the scope of delivery: 1x Pallet racking upright, used Material color: Sendzimir galvanized Upright type: SR 120|20 Profile dimensions: 120 x 75 x 2.0 mm Includes cross and diagonal braces and base plates The uprights are pre-assembled (bolted framework) Height: 2,500 mm Depth: 1,100 mm Gjdpfx Ahsz I R Ucodsbu General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Gedez Rvnzepfx Ahdjbu Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Godszrt Ivjpfx Ahdjbu Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: new, 60.06 m shelving, 40 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 60.06 running meters Shelf offer 60.06 running meters consisting of: - 0061 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0300 x shelf approx. 100 x 40 cm. - 1200 x shelf holder. - 0061 x Diagonal 1176 mm ( for crossing ). - 0061 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. Gjdpfx Ahjz Rl Auedobu We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5.610,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.