Screw compressor

MARK MSA 15 500AD

Condition: excellent (used), Year of construction: 2015, operating hours: 1,884 h, PROD. BRAND TYPE MSA 15 500AD2000 S/N CAI857781 YEAR 2015 POWER (kW) 15 CAPACITY (m3/min) 1.79 PRESSURE (bar) 10 HOURS (LOAD/TOTAL) 1884/8665 FREQUENCY INVERTER no BUILT-IN DRYER yes Iodpfjyi A Arsx Abnsap HEAT EXCHANGER no COOLING (AIR/WATER) air ON TANK yes, 500 l DOCUMENTATION yes NEW/USED USED

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch Iodpfxewu D Uno Abnoap • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 1,700 kg, fuel type: diesel, tank capacity: 180 l, color: white, output current: 435 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 110 kW (149.56 HP), continuous power: 100 kW (135.96 HP), total length: 2,750 mm, total width: 1,100 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 100 (100kW - 110kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 100R SZR - Maximum power - 110 kW / 140 kVA - Rated power - 100 kW / 125 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo R6105AZLDS Fuel type - Diesel (Diesel) Combustion: - 22.0 liters per hour (at 75% of maximum power) Iasdjtpnm Uopfx Abnjp - 14.5 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 7000 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274D 400V rated power - 100000 watts (100kW / 125kVA) 400V maximum power (up to 15 minutes) - 110000 Watt (110kW / 140kVA) Rated power 230V - 33000 watts 230V maximum power (up to 15 minutes) - 36600 Watt Rated current (400V) - 435.0 A Current protection - C16, C32, main - 200A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 180 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 110 x 275 x 145 cm Gross weight - 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - Electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 120Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Iasdpfxowm Ih Ao Abnjp Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5102, overall weight: 1,600 kg, fuel type: diesel, tank capacity: 190 l, color: grey-black, power: 88 kW (119.65 HP), output current: 160 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, total length: 2,675 mm, total width: 1,125 mm, total height: 1,645 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT Iveco NEF45TM2A, type of cooling: water, Equipment: CE marking, ESP: 88 kW / 110 kVA PRP: 80 kW / 100 kVA Engine: FPT Iveco NEF45TM2A Emission level: stage II Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Iaedjxy Iqzjpfx Abnsp Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (190 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 960 kg, fuel type: diesel, tank capacity: 120 l, color: white, output current: 51 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 28 kW (38.07 HP), nominal power (apparent): 35 kVA, continuous power: 25.6 kW (34.81 HP), continuous power (apparent): 32 kVA, total length: 2,250 mm, total width: 960 mm, total height: 1,250 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: RAYWIN - Stage V engine, type of cooling: water, Stage V emission genset Iasdpfx Aswzil Sjbnjp

Condition: new, Year of construction: 2025, machine/vehicle number: 20241221009, fuel type: diesel, power: 36 kW (48.95 HP), motor manufacturer: Cummins 4BT3.9-G2, General information Field of application: Construction Weights Empty weight: 1.102 kg Functional Generator capacity: 45 kVA CE mark: yes Iodpfx Abjtqlfwsnoap Other information Fuel consumption: 5.2 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A42 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 55 l Transport dimensions (LxWxH): 2,29x0,95x1,25 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Iajdpfxexpyfvo Abnjp Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: ready for operation (used), Percussion Mill Hazemag APP 1013 Brand: Hazemag Type: APP 1013 Feed Opening: 1300 x 1000 mm. Incl.: 250 kW E-motor. Iedpfjwqalzex Abnoap