Used Zero Adjuster for sale (22,034)

Condition: good (used), Dial gauge, zero adjuster, zero adjuster, zero adjuster -Manufacturer: Holex, zero adjuster type 359085 -Measurement accuracy: 0.01mm Cjdpferz Sy Sex Aqterh -Box dimensions: 165/120/H60 mm -Weight: 1.5 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm Cedpfx Aoz A Tx Tjqtsrh HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP Credpjz I Ub Hofx Aqtjh - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet Crjdpfxoz A Ubie Aqteh

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Crodpfxjz Dw Eme Aqtsh Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: like new (used), Year of construction: 2023, operating hours: 127 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 400 kg, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, table width: 2,000 mm, total height: 4,100 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 2,100 kg, product height (max.): 200 mm, Equipment: safety light barrier, 3-axis waterjet cutting machine, CMS Smartline 2040 model, manufactured in 2023. It has a travel range of 4,000 mm on the X-axis, 2,000 mm on the Y-axis, and a maximum cutting thickness of up to 220 mm. The machine features a robust work table with dimensions of approximately 4,150 × 2,080 mm and is equipped with a high-pressure pump. If you are looking for cutting performance to high standards, we recommend our offer for the CMS Smartline 2040. Contact us for more details. • Maximum work table size: approx. 4,150 × 2,080 mm • Cutting system • Technology: abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Maximum cutting thickness: up to 220 mm (depending on the material) • CNC interpolated cutting for complex shapes • Automatic height adjustment on the Z-axis • Axes and movement • CNC-controlled axes: X, Y, Z • Motors: brushless • Guides: linear guides with ball recirculation • Drive system: rack and pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability accuracy: ±0.03 mm • Waterjet pressure system • Maximum operating pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: 30 HP high-pressure pump included; see additional options • Control and software • CNC: OSAI Open • HMI interface: CMS Active • CAD/CAM: compatible with EasyCut / EasyPump • Control panel with touchscreen on a mobile stand • Work table and loading • Support surface: steel grid table • Max. load on table: approx. 400 kg/m² Csdpsz I Sagsfx Aqtjrh • Electricity and connections • Power supply: 400 V / 50 Hz / 3 phases • Installed power: approx. 35–40 kVA (depending on configuration) • Protection rating: IP54 (electrical cabinet) Csblf Hjzh Itxjhm Derh • Safety and equipment • Safety systems and optical barriers • Automatic lubrication system (X, Y, Z) • Collision detection system for the cutting head • Laser pointer for setting the zero point • Electrical cabinet and control panel Additional equipment • High-pressure pump (30 HP) • Abrasive feeding system (capacity 270 kg)

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Credpoz Icmkjfx Aqtjh

Condition: used, This listing is for a Thermo Scientific TSX40086V Ultra Low Temp Freezer. The unit is in full working condition and is ready for immediate release. This unit is supplied with temperature sensors The Thermo Scientific TSX40086V is an ultra-low temperature freezer designed to provide reliable, sustainable, and energy-efficient storage for laboratory samples. With advanced technology and robust security features, it ensures the safety and preservation of valuable materials. Key Features: Capacity and Dimensions: Storage Capacity: Holds up to 400 2-inch boxes, offering ample storage for a variety of sample types. Compact Design: Exterior dimensions of 37.6 × 28.3 × 78 inches, making it suitable for diverse laboratory spaces. Temperature Range and Performance: Temperature Range: Maintains ultra-low temperatures from -50°C to -86°C, ensuring optimal sample preservation. Temperature Stability: Less than 5°C variation throughout the cabinet space for consistent storage conditions. Cedpfjxxycmox Aqtsrh Warm-Up Time: Long warm-up time from -50°C to -80°C (approximately 5.05 hours), ensuring extended protection during power interruptions. Energy Efficiency and Sustainability: Energy Star Certified: Reduces energy consumption without compromising performance, saving on operational costs. V-Drive Technology: Adjusts to user patterns to optimize energy use and reduce HVAC demands. Eco-Friendly Construction: Manufactured in a zero-waste facility with natural refrigerants and water-blown foam insulation. Compliant with U.S. EPA SNAP and EU F-Gas regulations. Connectivity and Monitoring: DeviceLink Technology: Enables real-time monitoring of system status and sample temperature via mobile and web applications for convenience and peace of mind. Safety and Security: Advanced Security Features: Includes alarm settings, padlock-compatible doors, and optional access card entry for enhanced protection. Benefits: Sustainability: Manufactured with environmentally responsible practices and materials, making it a sustainable choice for labs aiming to reduce their carbon footprint. Energy Savings: V-Drive Technology and ENERGY STAR certification significantly reduce operational costs by optimizing energy consumption. Sample Protection: Long warm-up time and consistent temperature stability protect valuable samples even during power outages or fluctuations. Convenient Monitoring: Remote monitoring through Device Link ensures that system status and temperature can be checked anytime, anywhere. Flexible Storage: Accommodates a wide range of sample types with its large capacity and uniform temperature distribution. Applications: The Thermo Scientific TSX40086V is ideal for laboratories requiring dependable ultra-low temperature storage for critical materials, such as: Biomedical Research: Long-term storage of biological samples, DNA, RNA, and proteins. Clinical Laboratories: Preservation of vaccines, plasma, and other temperature-sensitive specimens. Pharmaceuticals: Storage of compounds, drugs, and reagents. Industrial Research: Safe storage of raw materials and chemicals.

Condition: excellent (used), The HEBROCK K36 Airtronic is a used edge banding machine with PC control, a touchscreen, and a pivoting control panel. The zero-joint Airtronic system is complemented by extensive equipment for joining, edge banding, capping, milling, and trimming. Control and Workpiece Guidance: The machine has a program memory and automatic pressure beam adjustment. The feed is controlled by a conveyor chain, and the infeed guide is adjustable by motor. An extendable workpiece support assists with workpiece guidance. The feed speed ranges from 7 to 10 m/min. Workpieces with a thickness of 8 to 60 mm and a minimum length of 200 mm can be processed. Edge Processing and Glue Application: A diamond joining cutter operates in both forward and reverse directions and has a power of 2 x 2.2 kW. For glue application, there is a quick-heating tank, a changing device for glue tanks, and interchangeable glue applicators. The use of PUR adhesives is possible. For roll material, an edge thickness of 0.5 to 3 mm is specified. The support plate for the edge material has a diameter of 850 mm. Post-Processing Units: The trimming saw is equipped with an HF motor. This is followed by a flush-cutting unit and a flush, radius, and bevel cutting unit with pneumatic adjustment. A multi-tool and a multi-radius trimming blade are also included. For trimming blade processing, a flat trimming blade and air nozzles on the radius and flat trimming blade are available. The chip collection box is assigned to the radius trimming blade. A changing motor is available for corner copying; the maximum edge thickness for this is 3 mm. Additional Equipment: The machine has spray devices for release agents, cleaning agents, antistatic coolant, and lubricants. LED lighting is installed in the machine area. The total length is 5,540 mm. With dimensions of 5,540 x 1,210 x 1,450 mm, the machine weighs 1,700 kg. The compressed air connection is specified as 7 bar. Condition: The HEBROCK K36 Airtronic is offered as a used machine. Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked Credpfsymyp Rjx Aqtsh - Ready for immediate use

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Codpfx Aqszqgg Aetsrh Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC turning and milling center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of manufacture: 2019 Internal machine number: 71 Travel distances: X-axis: 925 mm Y-axis: 520 mm Z-axis: 2,215 mm Distance between centers: 2,000 mm Turning diameter over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-position tool changer Programmable steady rest with hydraulic quill Equipment - Chip conveyor Interlit ISF - Full-stroke cylinder - 6-jaw power chuck SMW Ø 500 IEP Crodpfx Aozwulyjqtoh - Manual rinsing gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input resolution of 0.1 µm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In-process measurement with Renishaw measuring probe for X/Z/C axis - Automatic zero point adjustment in the Z-axis of the main spindle - High-precision C-axis - Turning function for NC B-axis - Interpolation turning with the X/C/Z axes

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Rotary range C-axis: 360° Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated belt chip conveyor - Coolant nozzle - MPC – Machine Protection Control - NC swivel rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: Csdpfx Aez Eby Reqtorh - 980 l tank - Purge air for linear measuring systems - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions - Automation, manufacturer Zero Clamp Zerobot 100P Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, This listing is for a Hirschman pipetus with charger station The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely Csdpfx Aqexv Dznetsrh PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for the Eppendorf xplorer plus electronic pipette The unit is in full working condition and is ready for immediate use Eppendorf Xplorer™ Plus Electronic Pipette – Single Channel The Eppendorf Xplorer™ Plus is an advanced electronic pipette designed for simplicity, precision, and reproducibility. This innovative pipette facilitates a wide range of intelligent applications such as aspirating, diluting, sequential dispensing, and reverse pipetting, ensuring enhanced productivity and flexibility in the laboratory. It helps eliminate delays caused by complicated programming or inflexible processes, allowing for more efficient workflows. Key Features: Multifunctional Rocker: The “Up is up and down is down™” principle for intuitive operation, along with easy function selection via the practical selection dial. Intuitive Interface: Operate in your preferred language with a clearly arranged color display and no sub-menus. The integrated help function ensures that guidance is always available when needed. Innovative Rocker: When the tip is ejected, the piston automatically returns to its zero position, ensuring smooth operations. ON/OFF Switch: The pipette automatically switches off during longer periods of inactivity to preserve battery life. Advanced Applications: Additional functions such as aspirating, diluting, sequential dispensing, and reverse pipetting enable more complex processes with ease. One-Time Programming: Save your programming sequences for faster handling of complex pipetting tasks. Fixed Volume Settings: You can save your desired volume settings for quicker access during repetitive tasks. Password Protection: Secure your pipette settings with password protection to prevent unauthorized changes. Individual Speed Settings: Adjust the speed parameters to your individual working pace. Maintenance Reminder: Set reminders for pipette maintenance based on time or frequency of use. Reproducibility: Consistently reproducible results with volume and speed adjustments that remain precise and reliable. Ergonomic Design: PhysioCare Concept™ reduces weight and improves balance, offering an optimally angled pipette head for better comfort and ergonomics. Spring-loaded tip cone ensures a secure fit, providing maximum tightness. Clear Display: The high-resolution color display enhances visibility, ensuring that parameters are clearly visible at all times. Applications: Pipetting: Liquids (manual and automatic) Crodpjxv Di Ssfx Aqteh Dispensing: Timed and manual dispensing Pipetting and Mixing: Ensures thorough mixing of liquids in addition to accurate pipetting

Condition: used, Year of construction: 1991, cutting diameter 420 mm saw band length 4570 x 41 x1,3 mm table height 800 mm cutting width 400 mm capacity 90 degrees: round 420 mm capacity 90 degrees: flat 300 x 200 mm capacity 90 degrees: square 300 x 200 mm cutting speed 15 - 90 m/min total power requirement 7,0 kW weight of the machine ca. 2200 kg Standard Accessories for the HFA Series - Chip conveyor - Feed pressure regulator - Cut length adjustment - Multiple feed - Piece counter - Powered chip brush - Hydraulic belt tensioning - Stepless belt speed control Crsdpfoz Ek Dfjx Aqteh - Jog button - Cutting and guide plates - Automatic zero stop - Cutting accuracy monitoring - NC cut length programming - Error reporting system

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AX 3/S, drilling capacity in steel 40 mm, spindle speeds: 160-2250 rpm, short spindle MK3, spindle stroke: 120 mm, overhang: 293 mm, column diameter: 115 mm, machine table usable support surface: 514 x 360 mm, with T-slots 2 x 14 mm x 224 mm, distance spindle-table min./max. 117/701 mm, machine table height adjustment via hand crank, machine height without options: 1840 mm, net weight: 260 kg. Standard equipment: Main switch with locking mechanism Motor with thermal protection contact Mushroom push button (latching) for EMERGENCY STOP Speed adjustment, stepless Spindle guard with electrical protection Main switch Right and left rotation Protection class IP 54 Motor insulation class "F" (155°) Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Digital drilling depth display Zero point setting (drilling start) 5-digit LED display, character height 13 mm, item no. 37.1 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment. Cjdpfsz E Sqyjx Aqtorh

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Codpfxexv Ax Se Aqtjrh Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: excellent (used), Sys Tec IT3000 Industrial Weighing Terminal Universal industrial weighing terminal for integration into Ethernet networks It includes the proven, configurable standard weighing programs: · BASIC for simple weighing systems · COUNT for piece counting · CHECK for simple check weighing · FILL for simple filling systems · ONLINE for simple weighing systems · TRUCK/ONLINE for vehicle weighing systems with online PC connection. Parameter settings can be made from the PC via the IT3000 Configurator or directly via the network using a web browser. After each weighing, the weight, date, time, and entered data can be saved directly to a file on the PC hard drive via Ethernet. No special PC software is required for this. In ONLINE mode, the IT3000 can be remotely controlled from the PC via the Ethernet interface. The command set includes weight query, tare, zeroing, and dialog functions. Any overload of the scale and other malfunctions are stored in an error table with date and time and can be viewed via a web browser. With integrated, calibratable weight memory, optionally with calibratable weight memory on the PC hard drive. Operation Operator guidance via a 20-character backlit clear text display, data entry via numeric and function keys under acid-resistant foil. Weighing Electronics Integrated measuring amplifier for connecting up to 8 x 350 Ohm strain gauge load cells, 4- and 6-wire technology Calibration as a single-range or multi-range scale and as a single- or multi-division scale Calibratable resolution of 6,000d at max. 80% pre-load, internally 524,000d 50 filtered measurements / second Calibration is performed either on the IT3000 via display/keyboard or via the Ethernet interface. Ethernet Interface Integrated Ethernet interface, RJ45 with adjustable IP address for 10/100BASE-T networks. Configuration with PC software ′EtherPort Tool′ via the network. Security Data stored in a network-failure-proof manner Password protection. Interfaces One serial interface as an option Crsdpfezp Uybox Aqtoh (RS232, RS485, or 20mA CL passive), for connecting a printer, remote display, or reference scale. Digital inputs and outputs PIM module with 2 digital 24V inputs and 2 digital 24V outputs as an option. Connection Values 110 (–15%) – 240 (+10%) VAC; 50/60 Hz, Power consumption max. 15 VA; Option: 12 – 30VDC. Operating Temperature –10°C to +40°C at 95% relative humidity, non-condensing. Options / Accessories Ethernet connection cable Protective cover PC software PC COM+ communication object for online operation PC software PC ARCHIVE for calibratable storage of weight data on the PC hard drive. More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, mileage: 56,666 km, power: 44 kW (59.82 HP), first registration: 08/2013, fuel type: electric, empty load weight: 1,580 kg, maximum load weight: 595 kg, overall weight: 2,175 kg, axle configuration: 4x2, wheelbase: 3,081 mm, fuel: electricity, CO₂ emissions: 137 g/km, fuel consumption (urban): 5.9 l/100km, fuel consumption (extra-urban): 4.8 l/100km, fuel consumption (combined): 5.2 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 4,597 mm, Year of construction: 2013, construction height: 1,810 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, including battery. The Renault Kangoo Maxi Elektro Zero Emission presents itself as a compact transporter in used condition, equipped with an electric motor that delivers 44 kW of power. The vehicle has been registered since Crsdpfx Aovkylieqteh August 13, 2013, and has a mileage of 56,666 km. This makes it particularly suitable for businesses seeking an environmentally friendly means of transport with practical features. Additional features include a rear parking assist, tinted rear windows, and sliding doors on both sides with windows. The interior offers a cargo area partition with a window, an adjustable steering column, and adjustable front seats. Safety features such as an airbag on the driver's side, side impact protection, and adjustable safety belts enhance occupant protection. The vehicle stands out with its yellow color and front-wheel drive with an automatic transmission. The wheelbase measures 3,081 mm, providing ample space for transport purposes. With a total weight of 2,175 kg, this model offers many possibilities for commercial use. The Renault Kangoo is an interesting option for environmentally conscious businesses looking for a reliable transport vehicle. Sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 51,078 km, power: 44 kW (59.82 HP), first registration: 08/2013, fuel type: electric, empty load weight: 1,580 kg, maximum load weight: 595 kg, overall weight: 2,175 kg, axle configuration: 4x2, wheelbase: 3,081 mm, fuel: electricity, CO₂ emissions: 137 g/km, fuel consumption (urban): 5.9 l/100km, fuel consumption (extra-urban): 4.8 l/100km, fuel consumption (combined): 5.2 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 4,597 mm, Year of construction: 2013, construction height: 1,810 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, including battery. The Renault Kangoo Maxi Electric Zero Emission is a practical van with space for two people. The electric vehicle, first registered in August 2013, features a 44 kW (60 hp) electric motor. The automatic transmission ensures a comfortable ride, and the front-wheel drive ensures good roadholding. With a mileage of 51,078 km, the vehicle is in good condition and its MOT is valid until September 2025. The yellow van offers numerous optional extras, such as rear parking sensors, a cargo partition with a window, and sliding doors on both sides. Exterior mirrors are also electrically adjustable and heated. Adjustable headrests, height-adjustable seats, and a steering column provide additional comfort. Other practical features include a spare tire with standard tires, an on-board computer, and an air-cooled battery, which is included in the price. With dimensions of 4,597 mm long, 1,810 mm high, and 1,829 mm wide, as well as a gross vehicle weight of 2,175 kg, the Kangoo is ideal for commercial users or as part of a fleet. Versatile loading options and robust safety features make it a reliable choice for a variety of applications. Crsdpfxevkylpj Aqtsh Sale only to commercial users (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Csdjz Hwvdspfx Aqtsrh Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES Credpoyymz Usfx Aqtjh CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Crodpfxszk Npgs Aqtoh Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm Codpfjzk Nnpsx Aqtjrh - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters Cedpfx Aqjwdny Tjtorh 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale