Used Robatech Miscellaneous for sale (243)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1146401-001, tank capacity: 200 l, year of last overhaul: 2017, We are offering a used drum melter, model RobaDrum 200, from the manufacturer Robatech. The machine is no longer needed in our operations but was in daily use until a week ago, in conjunction with a wrapping machine (applying adhesive to foil on MDF/particleboard). The machine functions properly and is ready for immediate use. It shows some external signs of wear and has some adhesive residue, which is typical for normal industrial use, but this does not affect its operation. The machine underwent its annual maintenance by the manufacturer last summer. The machine was controlled via a control panel (see photo), which is included in the sale. Technical data: Manufacturer: Robatech Model: RobaDrum 200 Year of manufacture: 2017 Condition: Used, fully operational Application: Hotmelt and PUR adhesives Drum capacity: 200 liters Kdsdpfxez Sy Smj Apieu Available for inspection in Winterswijk.

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter Kdodozfx A Eepfx Apieu * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2023, Complete Robatech hot melt adhesive system for a folding and gluing machine, consisting of 3 guns, fully overhauled in May 2026. Ksdpfx Aozlal Uepiodu

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Kjdpfxez Sb Rlj Apiodu Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Kdsdsy D Hfzspfx Apisu Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Kdedsvphzijpfx Apisu Equipment: 40 nozzles for consistent adhesive application

Condition: used, Year of construction: 2006, Format: 450 x 350 mm Kdodpfozu Spwsx Apisu

Condition: used, Year of construction: 1962, Format: 0x0 Kdedpfxoyxqyfj Apisu

Condition: used, Year of construction: 1971, The Heidelberg GTP is a high-performance hot foil stamping press, currently operational in a printshop in Germany. Designed for precision and versatility, this machine handles a wide range of applications, from luxury packaging to security printing. With a maximum sheet size of 340 x 460 mm and a minimum of 85 x 102 mm, the GTP accommodates diverse project requirements. It operates at speeds between 1,500 and 4,000 sheets per hour, delivering both efficiency and flexibility. The press features a punching pressure of 60 tons, ensuring crisp, high-quality foil application on various substrates. Weighing approximately 2,250 kg and with compact dimensions of 2.08 x 1.48 x 2.10 meters, the GTP is built for stability and ease of integration into existing workflows. The machine comes complete with all necessary tools, accessories, and a sturdy frame, making it a turnkey solution for any finishing department. Format: 340 x 460 mm Equipment: Hot Foil Stamping Tiegel Heidelberg GTP Size min. 85 x 102mm Size max. 340 x 460mm Speed min. min. 1.500sph - max. 4.000sph Kedozwf Ufepfx Apisdu Punching pressure 60T Weight approx. 2250kg Dimensions 2,08 x 1,48 x 2,10m Complete with tools and accessories include frame

Condition: used, Year of construction: 2021, Format: 0x0 Speed: 150 pieces per hour Power: 230 V (A.C.), 50/60 Hz Net Weight: 45 kg Measurements: (LxWxH): 50 x 75 x 35cm Equipment: Kedpfx Asyxqwdjpiedu Mechanical speed: 150 pieces/hour pneumatic drive height adjustable table heating plate for preheating glued bindings movable plate heated rounding book block thickness of 8-80 mm book block height max. 520 mm

Condition: used, Year of construction: 1964, The equipment described is a Heidelberg GT, a classic machine manufactured in 1964. This model, with the serial number 62323 N, has dimensions of 340 x 460 mm and is currently in stock in Germany. The Heidelberg GT is equipped with two frames and requires a power connection of 380/400 V. It is capable of processing up to 4,000 sheets per hour, making it a highly efficient machine for its time. Additionally, this machine can handle cardboard with a thickness of up to 1 mm, showcasing its versatility in handling different types of materials. This machine is a testament to Heidelberg's engineering prowess and durability, suitable for various printing and processing tasks. Format: 340 x 460 mm Kodpfowxxnkox Apiodu Equipment: with 2x frame Power connection 380/400 V Sheets per hour 4000 Cardboard: up to 1 mm

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Kjdpez Enbbsfx Apiedu Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kjdezpgh Djpfx Apisdu Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, Year of construction: 1973, The Hohner Favorit, manufactured in 1973 with serial number 1248, is a classic stitching machine built for durability and reliable performance. With a stitching capacity of up to 25 mm, it remains a practical solution for a wide range of binding applications. Currently located in Germany, the machine is in good condition without any damage, reflecting its robust construction and careful maintenance over the years. Renowned for its solid engineering, the Hohner Favorit continues to be a dependable choice for printshops and finishing operations seeking a straightforward, long-lasting stitching solution. Format: 25 mm Kjdpfjxb Dpcsx Apisdu Equipment: Good condition without any damage

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Kodpfozpghwjx Apiedu Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Working Table: Fixed pass height Vacuum feed belt: yes Kdsdpoztat Uofx Apisu No. Operating units: 3 Nr

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Equipment: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A Kdodpfx Apeyzruioisu weight 650 KG

Condition: used, Year of construction: 1966, This machine is an E. Bickel Perforation HK 3-61, manufactured in 1966, with the serial number 8716. It is designed to handle a size of 610 mm and is currently in stock in Germany. The price is available upon request. The machine is in good condition without any damages. It is suitable for use in perforating or grooving work. Format: 610 mm Equipment: with 1x perforating tools Kjdpfx Aew Emuxopisdu with 1x creasing tools perforating machine with electric motor

Condition: used, functionality: unexamined, Year of construction: 2019, The Dematic line is disassembled and ready for transport. Manufacturing date: 2019/2020. Technical throughput: – Conveyor capacity from the mezzanine to the induction stations – 1,800 cartons per hour – Conveyor capacity from the TTU sorter to VAS and the outbound sorter – 1,560 cartons per hour Loading units: a) Cartons on internal conveyors: – Average weight: 15 kg/carton – Dimensions: 600 x 400 x 400 mm – Weight: from 1 to 30 kg/carton b) Cartons on outbound conveyors: – Dimensions: 800 x 400 x 340 mm – No lid – Lid is applied at the end before shipment Kdsdpfx Apezxrtksiju – Weight: from 1 to 25 kg/carton – Average weight: 15 kg/carton The line is equipped with two TTU sorters. The TTU sorter is a compact sorter that works perfectly in narrow spaces. The TTU is capable of sorting both plastic bags and cartons. Each sorter consists of 2 infeed areas and 300 discharge locations. The two combined sorters have 4 infeed lines and 600 discharge locations. Cartons on the conveyor are identified and transported to the appropriate zone on the sorter. Sorter equipment: – 32 workstations with 16 screens – 16 screen supports – 20 RF scanners (10 per sorter) – 4 pallet discharge locations – SCS server – 2 Lantech case erectors and Robatech glue applicators – 2 Altek 700 kg scissor lifts, located on the outside of each sorter. Access to the platform is secured by a Troax system – when the lift is activated, access to the loading area is prevented by an electromagnetic lock. Additionally, the platform is enclosed with welded wire mesh. – 2 Fischer platforms – workstation for 12 employees (6 on each side), equipped with Data Logic barcode scanners and a Beckhoff CP3716-1071-0010 monitor.

Condition: used, Year of construction: 2012, Format: 500 x 350 mm Equipment: Accumulate & Folder ACF-30 Stacker ST-40 1x VAC-600 Ha 3x VAC-600 Hm Three knife trimmer HTS-30S Saddle stitcher SPF-30S 24 stations U-shaped layout: Efficient space utilization and easy monitoring Inline production from collating to finished product Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing Kdedpjyx Hu Eefx Apieu Fully automatic format adjustment for quick job changes Touchscreen for user-friendly operation, even for less experienced operators Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm Paper weight: 40-350 gsm Processing thickness: 8-200 pages (max. 5 mm spine thickness) Production speed: Up to 5,500 booklets/hour Stitch distance: 60-150 mm Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm Power supply: 400V / 50Hz Space requirement: Min. 5,709 x 3,240 mm

Condition: used, Year of construction: 1981, Format: 680 mm Ksdoy Dufcopfx Apiedu Equipment: with 1x perforating tools with 1x creasing tools perforating machine with electric motor

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 for Müller Martini Tempo saddle stitcher. Good condition Kdsdpfxjxfwvqo Apiou

Condition: used, Year of construction: 2015, Format: 530 mm Kodsyxqxnopfx Apiodu Equipment: Coate with IR and UV dryers 21 Zoll max. width shee roller flood coater with anilox spare applicating rollers included

Condition: used, Year of construction: 2016, Format: 400 x 660 mm Power: Electrical Requirements: Net Weight: 370 kg Measurements: (L x W x H): 125 x 200 x Equipment: Touchscreen Operator Interface Vacuum Feed Table Pneumatic Gauge/Positioning Arms Mechanical 2-Stroke Turning-In Cycle Corner Style Selector Modular Integration Interface Ksdpfxoyxqw De Apijdu Production Speed: Up to 300 covers/hour Maximum Open Case Size: Without corner trimmer: 400 x 711 mm / With corner trimmer: 400 x 660 mm Minimum Open Case Size: Without corner trimmer: 170 x 219 mm/ With corner trimmer: 170 x 229 mm Board Thickness: 1.5 mm to 3.5 mm Spine (Mellan) Width: 6.4 mm to 82 mm

Condition: used, Year of construction: 1998, Format: 650 x 320 mm Equipment: 1 clamp Milling and Notching Station Kdjdpfszkapdex Apisu Spine Gluing Side Gluing Hotmelt Automatic Cover Feeder Nipping Station Up to 600 cycles/hour Voltage: 3-phase, 400 V or 230 V 3.3 kW