Used Double Label Machine for sale (71,888)

Condition: good (used), Item: D-1717-Fischer Labeler Fischer Labeling Double machine Mount at stainless steel frame. Adjustable position of labels. Transport conveying belt 1600 x 200 mm. Nwjdpsidmvrsfx Agmsi Labeling at top and from side of product! Label width max. 100 mm? Sensor read Stationed in Denmark!

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. Nwjdpfx Aoxghngjgmei These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Nwodportr D Iefx Agmoi Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit Nodoq Ii Dlepfx Agmowi The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: new, Label printers and carton sealing machines LogComp / Bedo Nwedpjy H Ex Sefx Agmei

Condition: good (used), Year of construction: 2006, functionality: fully functional, Table size: 3000 x 1000 mm Drive power: 4.0 kW Belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Belt length: 9000 mm Space requirement: 4750 x 2300 mm Nedpfx Aezlh Nzjgmswi Machine height: approx. 2500 mm Compressed air: 6 bar Features: - Two belts for pre- and finish grinding - Triangular guide for the belts, providing unobstructed visibility and freedom of movement - Pneumatic belt tensioning with ball bearings - Adjustable belt speed - Tilting of the belts up to 90° - Belt self-centering - Pneumatically opening belt channels - Manual workpiece movement in 3 axes - Each axis with brake or locking mechanism - Vacuum clamping for the workpieces

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) Nwodpfoygtnaox Agmoi • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Nwodpfx Aezk U E Tjgmsi Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Nwedpfozmfg Tox Agmji Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Wheel dimensions (in mm): 300/40/76 Nwjdpfshaf Ndjx Agmsi Power (in kW): 1.8 Speed (RPM): 1450 Voltage: 380 Volt Lamp Protective shields Location: Available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm Nwjdpfed Im Nusx Agmoi nail length: 10 - 80 mm output: 300/600 nails/min.

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders Nwsdpfx Agexq Hkuemji The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2022, condition: good (used), Machine is in good working condition. Still in production. Nwsdpszlaqdefx Agmei Parts shown by hand not come.

Condition: used, Year of construction: 1995, machine/vehicle number: 1, 5-Farben Etikettendruck- und Endlosdruckmaschine - 5-Color Label- and Business Form Printing Machine Edelmann Junior Print DR2450Baujahr / Year 1995 - Serial-No. 1.228/8 Size 8 1/3" Druckformat / Printing Size max. 207.5 x 360mm Geschwindigkeit / Speed max. 40.000rev/h Papierbreite / Paper width 150-370mm Nwedpfxeh Axahj Agmsi Rollendiameter / Reel diameter 1000mm Diameter Kern / Core 70mm Papiergrammatur / Paper weight 30-160gr7sqm Schnittlänge / Cutting length 423.3 or 211.6mm Rolle zu Bogen / Roll to Sheet Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2013, condition: used, machine/vehicle number: 6012, Etikettiergerät / Labeling machine EcoLine 100-XSR Baujahr / Year 2013 - Serial-No. 6012 Durchlassbreite / bandwidth 100mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Etikettenlänge / label length min. 10mm Nwedpfxslgz U Se Agmsi Etikettenbreite / label width min. 10mm Innen-Durchmesser Etikettenrolle / Inside diameter of label roll 40/76mm Aussen-Durchmesser Etikettenrolle / Outer diameter of label roll 300mm Netzspannung / Voltage 115/230V, 50/60Hz Leistungsaufnahme / power consumption 400 VA Zertifizierung / Certification CE IP-Schutz IP44 (optional IP54) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Etikettiergerät / Labeling machine ETMA EM 01 Baujahr / Year 1993 Durchlassbreite / bandwidth 200mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Nwjdpfxoxnb E Io Agmsi Etikettenlänge / label length min. 10mm Etikettenbreite / label width min. 10mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Nodpfxjx A Hfio Agmjwi Max Panel Width: 3000 mm Max feed speed: 25 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Nodox A Hggjpfx Agmowi Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: excellent (used), Year of construction: 1984, Description to follow! Nwjdpfx Agozbczlomji

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Nwjdjt Hw N Hopfx Agmei Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. Nedek Ablljpfx Agmewi RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Year of construction: 2024, condition: used, Dimensions (LxBxH): 500 x 55 x 155 cm Working width: 4.700 cm Force: 130 kN Stroke: 14 mm Operation: pneumatic Adjustable working width: 4,700 mm Overall dimensions LxWxH: 5,000x550x1,550 mm Nedezm H Ewepfx Agmewi Equipped with: 4 Gema press jaws and various punches Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Rigid machine structure with large access doors. Integrated 600 dpi printer. Designer 2 user license. Slide-out mechanism (rear-side) for easy and fast label or ribbon replacement. Label rotation programmable in 1° increments. Vacuum sensing of the label from pick-up to placement. CCD camera to read the label before pick-up. Controlled by an industrial PC. Conveyor width adjustment using a hand crank. PCB side clamping. Active support base including 4 magnetic pins. Quick product change-over. Selectable by-pass operation. Uninterruptible power supply (UPS). SATO bar code printer EX2 Tower light display for machine status. CE certified. SPECIFICATIONS Printer type: SATO (600 dpi) Minimum label size: 6 x 6 mm Label creation software: ZebraDesigner 2 Cycle time: 2.5 sec. per label (6 x 6 mm) Labelling area: 460 x 460 mm Nedpfxjzmxyte Agmswi Conveyor type: 3 mm ESD edge belt Conveyor speed: 24 m/min System software: Windows Network interface: Ethernet Monitor: 21” high-density flatscreen PCB transfer height: 950 mm ± 25 mm* Component clearance: Top 30 mm, bottom 30 mm* Machine interface: SMEMA* Colour: RAL9002* Power supply: 230 VAC/50 Hz/1 Ph Power consumption: 700 VA max. Air supply: 6 bar Air consumption: 70 ltr/min max. Noise level: Max. 65 dB * or specify MACHINE SIZES Machine L x W x H (mm): 850 x 1680 x 1440 Weight (Kg): 750 Applicable PCB Length (mm): 80 - 508 Applicable PCB Width (mm): 65 - 460 PCB thickness (mm): 0.6 - 4 Fixed rail to front (A) (mm): 335

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. Nwodpsxq R Haefx Agmsi One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI Nedsx Nv S Ujpfx Agmowi