Used Path Processor for sale (1,132)

Condition: used, operating hours: 1,216 h, mileage: 8,947 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 5,350 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,150 kg, empty load weight: 4,200 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition as shown in photos * DULEVO 2000 * 4 x 4 all-wheel drive * Switchable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, up to 3,400 mm with third brush * High-pressure cleaner with hose and high-pressure lance at rear * Pre-spray system * Spraying width: 1,120 mm * Debris hopper: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high-tip emptying, tiltable up to 45° * Ideal for pedestrian, foot, and cycle paths, narrow alleys, etc. * 2-person full comfort cab * Air conditioning * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP * 40 km/h road approval * Heated tinted panoramic windshield * Comfort suspension seats * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find additional trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods, so that the buyer does not have any misconception about the condition and suitability. Viewing and testing are possible at any time by prior arrangement and are expressly desired. All information provided without guarantee. We accept no liability for mistakes or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors. Fjdpfow Emh Sox Affegb

Condition: used, operating hours: 7,572 h, mileage: 66,403 km, power: 62 kW (84.30 HP), first registration: 06/2018, overall weight: 3,500 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Multiple available Fedpfx Afey Rgdwefogb * First hand * Condition, see photos * Only 4,191 sweeping hours * 2 disc brushes at the front, 700mm wide * Pre-spray device * Sweeping width up to 2,300-3,020mm * Total width 1,320mm * Working speed 0-16 km/h * Sweeping waste container 1.8m³ * Water system 400 liters * Hydrostatic sweeping drive * 7,572 operating hours * Ideal for pedestrian and cycle paths, narrow alleys, etc. * 2-man full comfort cabin * Air conditioning * Heated panoramic windshield * Comfortable suspension seat * Rear view camera * Ergonomic arrangement of all controls * Radio Bluetooth MP3 * LED daytime running lights * Rotating beacons * 4 cylinder diesel engine Euro6 * Self-propelled street cleaner work machine * Wheelbase: 1,600mm * GVW: 3,500 kg * Empty weight: 2,810 kg * 50 km/h registration If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, mileage: 65,764 km, power: 62 kW (84.30 HP), first registration: 02/2018, overall weight: 3,500 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, onboard computer, parking sensors, * German vehicle * Multiple available * Condition, see photos * only 2209 sweeping hours * 2 front disc brushes 700mm wide * Pre-spraying device * sweeping width up to 2,300 - 3,020mm * Total width 1,320mm * Working speed 0-16 km/h * Sweepings container 1.8m³ * 400 liter water system * Hydrostatic sweeper drive * 5,271 operating hours * Ideal for pedestrian and cycle paths, narrow alleys, etc. * 2 man full comfort cabin Fgodey Rgddjpfx Affob * Air conditioning * Heated panoramic windshield * Comfort swivel seat * Reversing camera * Ergonomic arrangement of all controls * Radio - Bluetooth MP3 * LED daytime running lights * Rotating beacon * 4 cylinder turbo diesel engine Euro 6 * Self-propelled work machine Road cleaner * Wheelbase: 1,600mm * GVW: 3,500 kg * Unladen weight: 2,810 kg * 50 km/h approval If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 53,441 km, power: 62 kW (84.30 HP), first registration: 10/2017, overall weight: 3,500 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, onboard computer, parking sensors, soot filter, * German vehicle * Several times available * 1st hand * Condition, see photos * only 3361 sweeping hours * 2 disc brushes front 700mm wide * Pre-spraying device * sweeping width up to 2,300-3,020mm * Total width 1320mm * Working speed 0-16 km/h * Sweepings container 1.8m³ * 400 liter water system * Hydrostatic sweeping drive * 6,184 operating hours * Ideal for footpaths, cycle paths, narrow alleys, etc. * 2 man full comfort cabin * Air conditioning * Heated panoramic windshield * Comfort swivel seat * Reversing camera * Ergonomic arrangement of all controls * Bluetooth MP3 radio * LED daytime running lights * Rotating beacon * 4 cylinder diesel engine Euro6 * Self-propelled road cleaning machine * Wheelbase: 1,600mm * GVW: 3,500 kg * Unladen weight: 2,810Kg * 50 km/h approval Fgjdpfx Afjxl Si Esfsb If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 58,135 km, power: 62 kW (84.30 HP), first registration: 06/2018, overall weight: 3,500 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, next inspection (TÜV): 06/2024, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, onboard computer, parking sensors, * German vehicle * Several times available * 1st hand * Condition, see photos * only 3306 sweeping hours * 2 disc brushes front 700mm wide * Pre-spraying device * sweeping width up to 2,300-3,020mm * Total width 1320mm * Working speed 0-16 km/h * Sweepings container 1.8m³ * 400 liter water system * Hydrostatic sweeper drive * 6956 operating hours * Ideal for footpaths, cycle paths, narrow alleys, etc. * 2 man full comfort cabin * Air conditioning * Heated panoramic windshield * Comfort swivel seat * Reversing camera Fedpfx Afjvhp E Hjfogb * Ergonomic arrangement of all controls * Bluetooth MP3 radio * LED daytime running lights * Rotating beacon * 4 cylinder diesel engine Euro6 * Self-propelled road cleaning machine * Wheelbase: 1,600mm * GVW: 3,500 kg * Unladen weight: 2,810Kg * 50 km/h approval If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Year of construction: 2011, x-path 1200 mm y-path 650 mm z-travel 520 mm Travel rotary-swivel range in X 500 mm Fixed machine table travel range in X 570 mm A-axis +90 / -110 ° C-axis 360 ° Spindle holder SK 40 Speed 30-8000 rpm Swivel rotary table dimensions 520x420 mm Interfering edge diameter 610 mm Fixed table dimensions 700x600 mm Drive power 22 kW Dimensions 3600x2650x2800 mm Machine weight approx. 8500 kg Equipment: - 5-axis machining center Hedelius - CNC control Heidenhain iTNC 530 Fgedpfx Aetvgh Rsffjb - NC rotary swivel table on the right - Fixed table on the left - 30-fold tool changer - Electric handwheel - IKZ (20 bar) - chip conveyor

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release Fsdpeyhhgaofx Affsgb The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Fgodpfx Ajrz Irroffob Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Fgjdpfsvydwzox Affeb Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: used, Year of construction: 2020, functionality: fully functional, Cobot Collaborative Robot Dobot CR5 - Demonstration Robot with Chromebook Reach: 900mm Payload: 5kg Year: 03/2020 14-day commissioning guarantee. No further warranty. Collaborative Robot Series: Supports payloads of 3kg, 5kg, 10kg and 16kg Safe operation alongside human workers and cost-effective Fodpfxsy Rmd Re Affogb Hand-guiding, collision detection, and trajectory reproduction Ideal for human-robot collaboration use cases Multiple Control Methods: Low latency and high interference resistance Supports controls on Android, iOS, and Windows High-performance network card with data transfer rates up to 433 Mbps Intelligent Interactive Panel with Robot Hand-Guiding: The Intelligent Interactive Panel features embedded LEDs that indicate robot status With the push of a button, the robot can be guided by hand and taught a specific path Wide Compatibility: Extensive compatibility with a variety of peripheral devices Suitable for feeding, assembling, inspection, handling, screwing, grinding, and gluing Multiple I/O and communication interfaces enable unlimited expansion possibilities Adding software/APIs provides an open DOBOT platform supporting a wider range of compatible accessories.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Fgjdpfx Afsvvi I Refjb

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fodpfx Afevvkfdofjgb

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW Fgsdoy Emufepfx Affeb total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Fodpfx Afoyvfhdefjgb Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: good (used), Year of construction: 2011, travel distance X-axis: 1,200 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,200 mm, Travel path B: 0-360° Travel path A: +45° to -90° Fgodpfxoy Rpipe Affsb Spindle interface: HSK 100 Rotary spindle diameter: 200 mm Spindle speed: 15,000 rpm Chain magazine: 60 positions Pallet changer Chip conveyor High-pressure coolant through spindle Coolant filtration system

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, The Stierli-Bender, featuring a tool height of 130 mm and a long stroke of 200 mm, is suitable for both straightening and bending operations. Its open design and perpendicular insertion relative to the bending axis offer manufacturing advantages not only to steel and metal fabricators but also to sheet metal and copper processors. With the available standard tooling, very tight and closed forms, box sections, pipe pieces, brackets, or similar parts can be bent quickly and precisely. Depending on application requirements, the machine can be equipped with either a manual control unit or a CNC "Touch Screen" controller with angle programming. Fsdpfx Ajy Rppvjffjgb

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, The machine's control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for blanks with tensile strength 400 N/mm² max.: 3.5 mm Minimum sheet thickness: 0.5 mm Punch head force max.: 40 presses with max. force 7 t & 4 presses with max. force 26 t Lower cylinder force max.: 6 t Double punch force: 12 t (2 hydraulic punches) Minimum input table length: 370 mm Maximum input table length: 3,048 mm Minimum input table width: 300 mm Maximum input table width: 1,524 mm Maximum input table diagonal: 3,408 mm Minimum output table length: 250 mm Maximum output table length: 3,048 mm Minimum output table width: 60 mm Maximum output table width: 1,524 mm Vertical stroke of scissor lift table: 550 mm Usable load capacity of scissor lift table: 5,000 kg Minimum size of transportable sheet stacks: 300 x 100 mm MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller conveyor PRL3814F Universal destacking device DUF15 Punch head H2 Hydraulic power unit C1515 (3-unit pump system) Lower cylinder EI09 Double rotary punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Fgodpfxjy Emr De Affjb Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 MHz WINDOWS NT Documentation

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: 5-Axis Machining Centre Deckel Maho Model: DMU 50 M Year of manufacture: 2001 Control system: Heidenhain TNC 124 5 axes (3 + 2) Manual rotary axes with B and C swivel rotary table B and C axes are displayed on the control Table size: 700 x 500 mm Travel paths X/Y/Z: 500 / 400 / 400 mm Table load capacity: 200 kg Spindle taper: SK 40 Spindle speeds: 20 – 4,500 rpm Fgedpfx Afoy N Ad Dsfjb Drive power: 9 / 13 kW C-axis rotation range: 360 degrees Swivel range: plus 95 / minus 10 degrees Feed rate up to 5,000 mm/min Spindle speeds: 20 – 4,500 rpm Weight: 3 tonnes Coolant system Price: EUR 8,500.— net, ex-site, plus VAT.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment Fgodpfx Afsx Ahx Defsb CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Condition: new, Year of construction: 2021, functionality: fully functional, Ladies and Gentlemen, Brand new Erhardt+Leimer web edge control systems are for sale, which have been installed but have not been used to this day. Ultrasonic edge sensor POE FX 46: Compact ultrasonic edge sensor with digital evaluation Measuring range ±3 mm Insensitive to contamination by dust Scanning soundproof materials such as paper, plastic and metal foils regardless of material transparency Internal temperature compensation for stable operating point Bar display to show the current edge position or diagnostic information PoE interface to the data network center _____ FR 6011 broadband sensor infrared: digital, measuring range +/- 79mm, clear width 40mm, with cable 3000mm long with cable gland M16x1.5 and JST female connector 00367440 More details on request. Current delivery time according to E+L: approx. 10-12 weeks after receipt of order or payment in advance _____ Web guides/web edge control as shown, including monitor Production date is mid/end of 2021 (see type plates). 7x DRB14 rotating frame system EL.NET for controlling a running web, with digital position controller with touch display. Including connection cable. Fjdpfoi Hl Hhex Affsgb Sensor type: FR 6011 IR broadband sensor Nominal width: 250 mm Roller diameter: 60 mm web tension max.: 300 N Correction path max.: 42 mm If you need more precise data, please ask us or give us a call.

Condition: new, Year of construction: 2023, OKIO 2000W Automatic 4-Axis Fiber Laser Welding Machine Power: 2 kW Country of Origin: China Number of Axes: 4 Travel in X-axis: 500 mm Fedpfx Afjpq Nzaofegb Travel in Y-axis: 300 mm Travel in Z-axis: 300 mm Worktable Dimensions: 350 mm × 450 mm Travel Speeds: Y-axis: 10 m/min X-axis: 10 m/min Z-axis: 5 m/min Positioning Accuracy: ±0.02 mm 4th Axis: Positioner Rotational Positioning Accuracy: ≤0.05 mm Power Supply: 220 V/380 V Power Requirement: 7.5 kW Machine Dimensions: 500×1400×1900 mm Weight: 280 kg Chiller Welding Source: MAX Mounting Plate, Welding Head Visual CCD Monitoring System – uses a high-resolution camera and monitor to improve welding efficiency and quality The automatic OKIO laser welding machine enables welding of metal components in straight lines, circles, and any arbitrary paths, such as those found in mobile phone housings, mobile phone batteries, sensors, medical devices, and other industries. Laser welding machines use high-energy pulsed lasers to weld objects. High energy and high laser pulse density ensure smooth welds, a narrow weld seam, and a small heat-affected zone.

Condition: like new (used), Year of construction: 2015, operating hours: 230 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Fodpfxjxfzzqo Affegb Technical data of the HEXAGON OPTIV CLASSIC 321 GL tp measuring machine Year of manufacture: 2015 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measuring accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measuring accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume (optical sensor): X 300 mm / Y 200 mm / Z 150 mm Measuring volume (tactile sensor): X 230 mm / Y 200 mm / Z 150 mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Equipment of the measuring machine: • 3-axis microprocessor CNC with vector path control • Metrology software: PC-DMIS Vision • Vision sensor for non-contact measurement of the smallest and most precise components • CCD camera with 6.5x motorized CNC zoom • DC servomotors • TESA probe system (1 body and 1 module) • Modular probe changer: TESASTAR with 4 slots and 4 modules • Linear guides on all axes • Coaxial LED top light (white LED) • LED backlight (green LED + diffuser) • Multi-segment LED ring light • Evaluation computer from Dell included Optional services: Delivery (surcharge) Commissioning (surcharge)

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). Fjdjx Sdptspfx Affogb The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye Fgedpfjxmd S Ijx Affob X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Fgsdjxc Tr Ajpfx Affsb Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!