Used Versalift Etl-32-125 Rlc for sale (24,979)

Year of construction: 2002, Condition: ready for operation (used), Main spindle: turning diameter: 33mm, speed: 8000rpm, power: 7.5kW. Slide 1: travel X/Y/Z: 320mm/50mm/255mm, rapid traverse X/Y/Z: 30m/min, tool stations: 5. Slide 2: travel X2/Z2: 165mm/200mm, rapid traverse: 30m/min, tool station: turret, tool stations: 8, driven tools: 8. Coolant volume: 400l, pump capacity: 80l/min. Machine dimensions X/Y/Z: approx. 2500mm/1550mm/1750mm, control: Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Cehxzju T Rirsr E Segt

Year of construction: 2015, Condition: used, Demag chain hoist crane hoist 125Kg DC-Com 1-125 1/1 H4 V8/2 Cjhoqfcrbexzr E Sogt approx. 50 pieces available!!! 125KG / 0.125t payload / lifting load - 1-strand with 2 lifting speeds, lifting height approx. 4m complete with control bottle (approx. 3m) and load hook Weight completely approx. 22 kg, connection to 400V 50Hz, connection plug is included TOP condition, fully functional. No worn or used device! Connect and put into operation. Comes from ongoing operations Various years of construction available 2010-2017 Item location is 75053 Gondelsheim See pictures

Condition: good (used), Year of construction: 2008, 3-axle VEREM tank carrier Year 2008 Platform length 9.20 m GVWR 42 T Payload 32 T Gooseneck length 3.40 m Cjhsup Ih Eexzr E Ssgt

Condition: good (used), Year of construction: 2000, operating hours: 55,796 h, Functionality: fully functional, machine/vehicle number: 1141046, screw diameter: 45 mm, injection pressure: 1,878 bar, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Technical Specifications : Type : 125-520 C2 Year of construction : 2000 Clamping force : 1250 kN Mould opening force : 70 kN Travel force movable platen opening : 35 kN Travel force movable platen closing : 28 kN Size of mould platens (h x v) : 745 x 770 mm Cgjhxev E Nrzszr E Sjt Distance between tie bars (h x v) : 470 x 470 mm Mould opening stroke : 600 mm Mould height min.: 300 mm Max. daylight : 900 mm Hydraulic ejector - stroke : 150 mm Screw diameter : 45 mm Injection pressure : 1878 bar Stroke volume : 275 cm³ Pump drive power : 18.5 kW Heating power : 13 kW Oil filling (l) 345 Dimensions: 4.48 x 1.51 x 2.19 m Total machine weight : 6000 kg Max. mould weight : 1485 kg Machine currently in production

Condition: excellent (used), Chain hoists - DEMAG / STAHL - LIFTKET - 15 pieces: 1. Demag DKUN 20 - 4000 kg. 2. Demag DKUN 10 - 2000 kg. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. Cgehxzr Eovv Idwj Sjt 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag PK 1 N - 125 kg. 9. Demag DKUN 2 - 250 kg. 10. Demag PK 2 N - 500 kg. 11. Demag PKVUN 1 - 125 kg. 12. Demag engine PKUN 1 - 125 / 250 kg. 13. Steel T 405 M - 1000 kg. 14. Steel T 302 S - 500 kg. 15. Liftket Star 021/51 - 500 kg.

Condition: used, pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material -pinch valve pneumatic -Connection: DN125 -Width: 180 mm Cohxzrsdyk A Es E Sogt -Nominal pressure: PN16 -Quantity: 2 pieces available -Price: per piece -Dimensions: 251/265/H345 mm -Weight: 20 kg/piece

Condition: ready for operation (used), Pressing force: 1250kN, stroke rate: 55/min, max. switching frequency: 50/min, ram stroke: 8mm-120mm, ram adjustment: 80mm, power: 7.5kW, safety clearance: 340mm, weight: approx. 8700kg. The machine has a hairline crack on the main shaft. On-site inspection is possible. Cgshxzsukh Aler E Sjt

Condition: like new (used), Kemper SPL 125 Spiral Mixer in very good condition for further information please sent an request! Cshxzeumnzaer E Segt

Condition: used, overall weight: 40,000 kg, maximum load weight: 29,700 kg, axle configuration: > 3 axles, first registration: 10/2001, Equipment: ABS, * Goldhofer TU4 - 32/80 low loader * with hydraulic ramps * Hydraulic support legs * Lateral spread up to 3 m * 9.30 m length for loading * 2.55 m width * 4.30 m ramp length * 4 - axles * Leaf spring suspension * Disc brakes * FIN : WGOTU004510025098 * First registered : 01.10.2001 * Own weight : 10300 Kg * Total weight : 40000 Kg * Payload : 29700 Kg * Wheelbase : 1310 / 4700 / 1310 mm * Axle load : 10000 / 10000 / 10000 / 10000 Kg * Tires : 235 / 75 R 17.5 Cgshjkq Aqfjxzr E Sst * Net price * All information without guarantee

Condition: repair required (used), Year of construction: 2001, operating hours: 69,000 h, Functionality: limited functionality, clamping force: 1,250 kN, screw diameter: 45 mm, For sale is a KraussMaffei injection molding machine of the type KM 125-700C2 The machine itself is fully functional, unfortunately the injection unit has a leak which needs to be repaired. Technical data Year of construction: 2001 Operating hours: 69,000 h Clamping force: 125 t Cylinder Ø: 45 mm Valve gate: Pneumatic Core pull: 2*Hydraulic Internal pressure transducer On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Cshxzr Eeu Hxl Re Segt Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1998, Condition: good (used), machine/vehicle number: 3862-8063-564, Offer 23036 Technical data: - Drilling capacity into solid steel ST 60 32 mm - drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min / max distance spindle - table 310 / 610 mm - drilling radius min / max 400 / 1200 mm - table height 720 mm - table size 1200 x 500 mm - drive 400 V / 1,6 / 2,9 kW Cohxzskzg T Rsr E Ssgt - space requirement approx. W 1200 x H 2800 x D 2300 mm - weight approx. 1500 kg - with: - thread cutting device - hydr. columns + jib clamp - coolant device - T - grooves vertical at the rear side of the machine

Condition: used, tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder Cjhevaxlgoxzr E Ssgt -Milling holder: cutter head holder SK50 -Hole: Ø 32 mm -Dimensions: Ø 98 x 260 mm -Weight: 5.7 kg

Year of construction: 1992, Condition: ready for operation (used), Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible. Cshju S I Dkoxzr E Sogt

Condition: excellent (used), Functionality: fully functional, MADO Optimo32 meatball mixer in clean condition. Everything works properly. For more information please contact. Cgshxzr Eet R T Exs Sst

Year of construction: 2004, Condition: ready for operation (used), For sale is an injection molding machine brand Krauss-Maffei and type 125-520 C2 The machine was in a company that attaches great importance to cleanliness and maintenance Year of manufacture 2004 Pneumatic valve gate 2X Hydraulic core pull 83000 production hours Clamping force of the mold: kN 1500 MC 4 control system with color monitor, integrated control panel 4 additional cylinders 1* D35 /2* D40 / 1* D45 additionally included Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Cgohxjlkbhwszr E Sst For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 1993, machine/vehicle number: 2080, Offer 24346 Cgshxzouc Shhsr E Sjt Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling capacity reaming 40 mm - Drill spindle holder MK 4 - Drill spindle stroke 250 mm - Projection min. / max. 250 / 1000 mm - Boom stroke 750 mm - min. / max. distance - Spindle - base plate approx. 270 - 1040 mm - Machined base plate clamping surface B 1150 - 800 mm - Spindle speeds 50 - 2800 rpm - 6 feeds 0.05 - 0.31 m/rev - Drill spindle drive 400 V / 3.5 kW - Cube table - Coolant device - Space requirement approx. W 1050 x H 2610 / 340 x 1700 mm - Weight approx. 1800 kg

Condition: used, collet chuck, tool holder, tool holder, milling chuck, milling tool -Milling holder: SK50 2 pieces -Type: various versions see photos -1x mounting tool: Ø 32 mm -1x tool holder: Ø 40 mm with cutter Ø 44.5 mm Cshxzrjvahq Ee E Sjgt -Price/Delivery: complete -Transport dimensions: 315/200/H100 mm -Total weight: 10.8 kg

Year of construction: 1974, Condition: ready for operation (used), Working length: 3500mm, the pressure bar of the machine must be realigned. Cjhxoi Acq Rszr E Ssgt

Condition: good (used), Year of construction: 2000, machine/vehicle number: 00-417-011, Offer 24513 Technical data: - max. material thickness at 40 kg/mm² strength 3 mm - Max. projection 500 mm - Working depth 430 mm - hydr. infeed of the top roller Cgehevazp Ijxzr E Sst - Roller center distance 125 mm - Working speeds infinitely variable 3 to 15 m/min - Right + left rotation - Drive 400 V 1.5 / 2.5 kW - Space requirement approx. W 630 x H 1450 x D 1200 mm - Weight approx. 550 kg - with: - E - foot switch for top roller feed - E - foot switch for right - left rotation - Various roller sets - Stop apron

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head corner milling cutter 2 pieces -Type: 490-125Q40-14M 725386 Cjhxzr Eou Uwvue Sogt -Adapter: SK50x40x40 -Delivery/Price: complete -Dimensions: Ø 125 x245 mm -Weight: 6.8 kg/piece

Year of construction: 1996, Condition: ready for operation (used), Heating output: 22.15kW, motor power: 2.5kW, max. compressed air supply: 10bar, including spare parts. Cgjhxzreglvdys E Sst

Condition: good (used), Year of construction: 1984, machine/vehicle number: 332, Offer 24130 Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm Cgohxzrotxzrwj E Sst - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine

Condition: used, Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: KSB, block pump ETABLOC G 32-160 / 054 EX -Delivery rate: 2 - 14 m3 / h -Motor power: 0.55 kW -Speed: 1450 rpm -Pipe connection inlet: DN50 -Pipe connection outlet: DN32 -Quantity: 1x pumps available -Price per piece -Dimensions: 425/250/H320 mm Cgohxsgwmhdozr E Set -Weight: 35 kg / pc.

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Cgshxzr Eji Ew Dps Set

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Cehxzrsu At Tho E Sjgt Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting