Used Versalift Vdt-170-F for sale (8,022)

Condition: good (used), Code: 0267 Delqjtdgias Enavout Brand: SAMCO Model: RP/2 Automatic bevelling machine for wooden shutter pallets Bilateral bevelling of blind slats Max workpiece size mm 750 Min workpiece size mm 140 Operating speed approx 1800 slats/hour Working pressure 8 kg/cm2 Slats loader Weight kg 170

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 1,200 kg, lifting height: 3,600 mm, mast type: telescopic, construction height: 2,458 mm, fork length: 1,150 mm, total length: 1,698 mm, drive type: Lithium-Ionen, construction width: 800 mm, net weight: 639 kg, Pedestrian stacker Load center of gravity: 600 Duslqeu D S I Ts Enavjt Fork width: 170 mm Fork thickness: 60 mm Mast type: Telescopic Gearbox: Electromechanical Condition: New machine Technical condition: New Front tires type: Vulkollan Rear tires type: Vulkollan Battery Volt: 24V Battery Ah: 60Ah Battery manufacturer: Manitou Battery type: Lithium-Ion Battery year of manufacture: 2023 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Pulse control, CE certificate, lithium-ion technology,

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW Dolq Eevvx Dzenavjut ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges Duslswgwnlsq Enavjt - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1984, total width: 2,000 mm, total height: 1,700 mm, total length: 3,800 mm, Weight: 5.500 kg Price: On request - Model: Hydraulic - Max. working width: 3050mm - Back gauge: 1 - Max. sheet thickness: 6mm - Year: 1984 - Documentation available: No - Serial number: 65441 - Control: Conventional - Transport dimensions: 3800mm x 2000mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Dslq Eewf Uy Asnavsut VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 10 mm rear stop 1000 mm down holder 16 Stk no. of strokes 12 Hub/min oil volume 170 l total power requirement 22 kW dimensions of the machine ca. 4000 x 2450 x 2000 mm weight 8900 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment Dolq Enaswgcygsvsut - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual

Condition: excellent (used), Year of construction: 1972, Bürkle long-belt sander with vacuum table and vacuum pump Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7200 mm Weight approx. 900 kg Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm Duslq Enov Trlajavst Location: Arrives at the end of April at warehouse 54634 Bitburg Sold as is - no warranty - no guarantee - freight prepaid -

Condition: used, Year of construction: 1978, Year ca. 1978 für Stangenprofile und... ... für Flachmaterial material thickness max. 24 mm working length 300 - 600 mm efective widths 3 mal 170 mm drive motor 400 V, 11 kW, 50 Hz . +++++ Please note: Delq Ejirf Imenaveut The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2012, Working dimension X: 3.280 mm Working dimension Y: 1.320 mm Working dimension Z: 170 mm Number of milling spindles: 1 Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 22 Linear tool changer: Yes Disc tool changer: Yes Number of exchangeable units: 4 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Lock recess milling aggregate: Unit, changeable Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Safety mat Two rows of stops: Yes Workpiece support aids: Yes Handheld terminal: Yes Control: BIESSE BH 660 Dsljwhfdqeq Enaveut Software: BIESSE BIESSEWORKS

Year of construction: 1999, Condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Djlqjktfias Enavsut Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: used, Year of construction: 2008, travel distance X-axis: 1,700 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,400 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 3,959 mm, table width: 1,000 mm, table length: 1,000 mm, overall weight: 30,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37 W, space requirement length: 9,007 mm, space requirement width: 5,676 mm, CONTROLS .. CNC controls MAZATROL 640M WORKING RANGE -CUBIC- .. X-axis travel: 1700 mm .. Y-axis travel: 1400 mm .. Z-axis travel: 1400 mm TABLE .. table surface (left-right): 1000 mm .. table surface (front-back): 1000 mm .. workpiece load (max): 3000 kg SPINDLE / HEAD .. spindle revolutions (min): 35 /min .. spindle revolutions (max): 10000 /min .. drive power: 37 kW .. spindle torque: 525 Nm AXIS DRIVES .. rapid traverse: 40000 mm/min .. rapid traverse X: 40000 mm/min .. rapid traverse Y: 40000 mm/min .. rapid traverse Z: 40000 mm/min TOOL MAGAZINE .. magazin type: chain magazine .. number of positions: 160 .. tool diameter max.: 135 mm .. - with free neighbour positions: 260 mm .. tool length max.: 650 mm .. tool weight max.: 30 kg .. tool changing time: 6.9 s AUTOMATIC WORKLOAD EQUIPMENT .. store type: pallet changer .. number of store positions: 12 .. number of pallets: 12 ELECTRICAL SPECIFICATIONS .. mains power supply: 100 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9007 mm Duolq Enaewhbufsvjt .. space requirements -front/back-: 5676 mm .. total height: 3959 mm .. total weight approx.: 30000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: no .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes We are selling 2 Mazak FH-10800 built in 2008 and 2006, including pallet station. -Capacity for 12 pallets - Tool holder SK 50 (Din 69871 A) -Hangs on central cooling, high pressure pump is included -Clamping cubes each 500x1000x1500 mm and 650x650x1500 mm

Condition: used, Year of construction: 2008, operating hours: 38,800 h, Functionality: fully functional, Macpresse MAC 111 / 1 baler, pressing force 170 t, built in 2008 Technical specifications: Manufacturer: Macpresse International S.R.L., Milan, Italy Type: MAC 111 / 1 Year of manufacture: 2008 Operating hours: 38,751 as of March Pressing force: 170 t Drive power: 2 x 55 kW Mains voltage: 400 V / 50 Hz Filling opening: 1,800 x 1,020 mm Press chamber volume: 2.7 m³ Bale size: 1,100 x 1,100 mm (H x W) Throughput / mixed paper: 30–35 t/h Binding: 5-fold horizontal Transport dimensions: approx. 11,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 39,000 kg Accessories: Hopper, turbulator Note: The press is expected to be in operation until May 16, 2025, and can be inspected in operation upon request. The conveyor belt shown in the photos is not included in the scope of delivery. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Duolq Enswgkfdsavet Inspections are possible by arrangement. Sales against advance payment are ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 1995, Used Brand Bütfering Type AWS-1100 Machine in excellent condition - carpet in very good condition - Year of manufacture 1991 Machine No. 2127547 Working width approx. 1100 mm Passage height approx. 160 mm Number of units: 1 unit Belt dimensions 1900 mm x 1120 mm Extraction connection Dolq Eov Tfyksnavjut Space required approx. 1700 mm x 2100 mm x 2100 mm Weight approx. 2200 kg Storage location: Warehouse 54634 Bitburg, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty Available end of April 2025

Condition: used, mileage: 115,000 km, Year of construction: 2019, Field of application: Freight transport Serial number: WV1ZZZ7HZKH065552 Please contact ATS Norway AS for more information Please provide reference number upon request: 20170 Volkswagen Transporter Exclusive 2.0 TDI 204hp 4M DSG Long - 2019 model   Model year: 2019 Mileage: 115,000 km Engine : 2.0 TDI (204 hp) Gearbox: DSG automatic Drivetrain: 4Motion (four-wheel drive) Body: Long version (LWB)   Well maintained 2019 Volkswagen Transporter Exclusive for sale. This is a powerful and well-equipped van with four-wheel drive and automatic transmission, adapted to demanding workdays and professional use. The long version provides increased loading capacity and flexibility.   Selected equipment: - 204 hp diesel engine - DSG automatic transmission - 4Motion four-wheel drive - Long version (LWB) - 4 x OZZ lights - Air conditioning in luggage compartment - DAB radio - CD player - Air conditioning Km: 115000 HK: 204 Technical approved: Yes EU-approved until: 06.08.2026 Own weight: 2201 Payload: 924 Width: 190,4 Length: 530,4 Euro: 6 Gearbox: Automatic Number of seats: 3 Duelq Eewdvh Esnavst

Condition: used, Year of construction: 2019, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 2 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Vacuum table: Yes Djlewhfc Hsq Enavsut Sensing of workpiece thickness: mechanical Main motor power: 11 kW Feedrate max: 9 m/min Blow-off device: Sanding belt Configuration of aggregates: r-c-u Side of belt change: Left Protection against workpiece over-thickness: Yes Control: B&R Power Panel Conformity marking: CE mark Weight: 2.060 kg Space requirement Length: 2 m Space requirement Width: 1,9 m Space requirement Height: 2,4 m

Year of construction: 2012, operating hours: 3,565 h, Condition: ready for operation (used), General Data Measurements width 2630 mm Measurements depth 5745 mm Measurements height 2151 mm Machine weight 7700 kg Control Unit Brand Fanuc Model 160i-L AMNC-F Additional Equipment Laser with combination unit Light barrier complete with deflection post (transmitter, receiver, and 2 deflection columns) Stand mirror/machine mirror Pressure reducers for CO2 laser gas, oxygen bundle, and nitrogen bundle with 15-meter flexible hoses Various consumables such as lenses, nozzles, filter fleece, etc. Lens carriers 5“ and 7.5” This 3-axis AMADA LC 2415 α-IV NT CO2 laser cutting machine was manufactured in 2012. Ideal for precision cutting, it offers robust performance and reliability. Consider the opportunity to buy this AMADA LC 2415 α-IV NT CO2 laser cutting machine. Contact us for more information. Application Types Cutting Delq Enaowg Iddevjut

Condition: used, Year of construction: 2005, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: FANUC, controller model: 18I MB, total height: 2,500 mm, spindle speed (max.): 9,000 rpm, space requirement length: 5,357 mm, space requirement width: 3,202 mm, CONTROLS .. CNC controls FANUC 18I MB WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 2000 mm .. Y-axis travel: 500 mm .. Z-axis travel: 550 mm SPINDLE / HEAD .. spindle revolutions (max): 9000 /min TOOL MAGAZINE .. number of positions: 24 Duelq Eewha Tmsnavjt .. tool diameter max.: 75 mm .. - with free neighbour positions: 160 mm .. tool length max.: 320 mm .. tool weight max.: 4 kg .. tool changing time: 15 s AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 24 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5357 mm .. space requirements -front/back-: 3202 mm .. total height: 2500 mm including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders 50 pieces Tribos-S Polygon chuck with diameter 6,8,10,12,16 Lathe chuck diameter 12,20,32 SK40 Tightening bolt with hole

Condition: excellent (used), Universal milling machine Maho Type: MH 300 Drive: brake motor for milling spindles KW: 1.1 Main gear: sliding gear, geometrically stepped. - 1.25 Number of gears: 18 Djlq Enasvyuaaovjut Table clamping area: 520 x 260 mm x-travel: 300 mm y-travel: 350mm z-travel: 200 mm Spindle mount: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Digital display Feed rates X,Y,Z Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 800 kg Location: from stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2022, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Delq Enajwhfcmovsut Sanding rollers: 2 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Polishing aggregate: Scotch Brite Vacuum table: Yes Vacuum fan: Yes Sensing of workpiece thickness: mechanical Main motor power: 18,5 kW Adjustable sanding belt speed: continuously variable Aggregates with frequency inverters: 1 Feedrate max: 9 m/min Continuously variable feed: Yes Blow-off device: Sanding belt Configuration of aggregates: r-c-u Side of belt change: Left Control: SCM eye-S Conformity marking: CE mark Weight: 2.060 kg

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 142 cm Measurements depth 254 cm Measurements height 290 cm Machine weight 1700 kg Control Unit Brand FANUC Model 0iMF Main Drive Spindle speed range 12000 rpm Movement X-Axis Movement 699 Y-Axis Movement 3988 Z-Axis Movement 300 This 3-axis Enshu WE30Ve was manufactured in 2016. A vertical machining centre designed for precision and efficiency, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Enshu WE30Ve machine we have for sale. Contact us for more information about this machine. Dolq Eewg Id Denavsut Application Types Milling

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Duelq Ejv Sg T Njnavot Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: used, Year of construction: 2022, Working dimension X: 5.020 mm Working dimension Y: 1.680 mm Working dimension Z: 170 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Dujlq Eswhfcgjnavot Blow-off device: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: 5-axes spindle SCM 5-axes spindle PRISMA KT: Yes Tool clamping system: HSK-F63 Tool changer positions: 28 SCM Tool changer RAPID 16: Yes SCM Tool changer TR 12: Yes Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction SCM Drilling aggregate F 26 L: Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Three stop ranges: Yes Number of consoles: 8 Self-adjusting machine table: Yes SCM Machine table MATIC: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Special workpiece clamping system: For windows Anzahl Sonderspanner: 4 Barcode reader: Yes Safety device: Bumper, Light barrier Chip conveyor: Yes Interface for .dxf data: Yes Tool charge measurement: Yes Remote control: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Software: SCM MAESTRO ACTIVE CNC, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 5000 rpm Delq Enaswg Igfjvout Spindle motor power 36 kW Tool taper SK50 Movement X-Axis Movement 3400 Y-Axis Movement 630 Z-Axis Movement 630 Additional Equipment Number of Tools: 40 This 3-axis SW BA 40 NC vertical machining center was manufactured in 1999. Ideal for precision machining tasks, it offers robust construction and reliable performance. Consider the opportunity to buy this SW BA 40 NC vertical machining center. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2022, Working dimension X: 3.117 mm Working dimension Y: 2.177 mm Working dimension Z: 150 mm Number of milling spindles: 1 Blow-off device: Yes Main motor power: 14 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 18 SCM Tool changer FAST 18: Yes Tool changing auxiliary device: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, 90° turnable SCM Drilling aggregate F 23 LR: Yes Djlqjwhfcas Enavsut SCM : Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table SCM Machine table HE Multi function table: Yes Multi-zone vacuum: Yes Dynamic vacuum: Yes Anzahl Vakuumzonen: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Feeding: Vakuum-Einzugsvorrichtung, Panel storage system Outfeed: discharge unit Safety device: Bumper, Light barrier SCM Pro-Speed: Yes Interface for .dxf data: Yes SCM TecPad: Yes Automatic central lubrication: Yes Tool charge measurement: Yes SCM S-N-D three-position selector switch: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MSL, SCM NESTING FREE-FORM, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Dujlq Enjwhfb Noavet Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark