Used Versalift Vdt-170-F for sale (8,096)

Condition: reconditioned (used), Mobile flat pile feeder, max. 53 cm working width, ultrasonic double sheet control, height-adjustable Dsletyk Idjrd I T Djcg

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Type: 108FX - Glass thickness 3 - 30 mm - Min. size: 40 x 40 mm - Feeding speed: 0.6 - 6 meters/minute Dcelrdewb Sfhe I T Dsg -Equipment 2 diamond disk straight edge 1 diamond disk trailing edge 1 polishing disk rear edge 1 diamond disk leading edge 1 polishing wheel leading edge 2 flat-edged polishing wheels - Electric power: 22.5 KVA (18 kW) - Grinding water tank and pump - Working height: 800mm - Dimensions: 8100 x 1400 x 2700 mm - Weight 2700 kg

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit Dcolohy Tlrerd I T Dsg - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2025, Functionality: fully functional, Technical specifications: Cutting height 200 mm Cutting height at 45° tilt: 140 mm Pivoting to the left up to 67° Pivoting to the right up to 45° 5 kW 1 Hydraulic feed brake (optional) Cutting length 420 mm at 90° position Cutting length at 45° tilt: 295 mm Pivoting to the left up to 60°, tilting to the right up to 30° The tilt adjustment is done from the front using a hand crank. 1 saw blade for wood, diameter 520 mm 1 heavy-duty cutting roller conveyor, length 6,000 mm, left-hand side. The stop is adjusted from the front using a handwheel. The length can be read digitally to the millimeter. The stop is pneumatically locked. 1 x 230-volt digital display 1 x heavy-duty feed roller conveyor, right-hand side, length 4,000 mm Djlrden R A Ewo I T Djcg Machine length 11,700 mm Completely mobile Machine packed on planks Images show a customer's machine.

Condition: used, Year of construction: 2016, operating hours: 5,500 h, Field of application: Construction Dolrd Ioqvzprs T Djcg Drive: Wheel Empty weight: 15.320 kg Make of engine: Caterpillar Transport dimensions (LxWxH): 8.25x2.55x3.28 Please contact Sales Department for more information

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,319 h, Doppstadt DW 3060 Biopower Type F - Year of manufacture 2019 - Operating hours 5,225 - MTU R61300 engine with 490 hp - AD BLUE - Weight 25,000 kg - Remote control - Humidification system Dcjlrd I Tswb Tibe Deg - 5.5 m rear conveyor - Overhead conveyor magnet - Hydraulic self-drive The machine is overhauled and available immediately.

Condition: used, Year of construction: 1989, Drilling / Milling Machine IBARMIA B 32 F Travel X: 675 mm Travel Y: 350 mm Travel Z: 600 mm Dslrd Iowcf U Ej T Dscg Cone SA 30 Spindle exit: 200 mm Rotation: from 75 to 2375 RPM Table size: 1200 x 360 mm Year of construction: 1989 Maxi distance spindle nose/table: 700 mm Throat depth: 380 mm Swivel head at +/- 45° Table: X - Y manuel movements Motor: 2-speed motor Scale ACU-RITE Auto descent Drilling / Tapping function Watering Voltage: 380 V Width: 1600 mm Depth: 1600 mm Total height: 2500 mm Weight: approx 2 T

Condition: used, mileage: 148,565 km, power: 368 kW (500.34 HP), first registration: 02/2022, fuel type: diesel, color: grey, next inspection (TÜV): 05/2027, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Internal vehicle number: 153129 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Interior * Air conditioning with temperature control Comfort and Environment * Retarder * Auxiliary heating Multimedia * Navigation Dslswb Rprsrd I T Djcg Other * 4 new rear tires * 600L + 450L standard fuel tank * Adaptive cruise control (ACC) * Adaptive and predictive cruise control (cruise control) * Aluminum wheels 315/60R 22 * Passenger seat armrests * Automatic headlights and rain sensor * DAB radio * Dual power take-off with Cabin Interior Control Unit (NH4C) * Air horn * Electro-hydraulic power steering (EHPAS) * Refrigerator * LED lights * Air-assisted auxiliary heating * Luxury equipment * Hire purchase / financing or leasing available through F-Trucks Finance GmbH. We would be happy to provide you with a quote. * Multimedia system with 7.2?? Touchscreen & Truck Navigation System * Tire Pressure Monitor (TPMS) * Side Panels * Parking Air Conditioner with 210Ah AGM Battery Other: * Nationwide delivery for €249 net plus VAT (€296.31 incl. VAT) * For all vans: 12 or 24-month Mercedes-Benz Used Car Warranty available upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We would be happy to provide you with a quote. * No liability for printing or typographical errors. * Subject to errors and prior sale. ----.

Condition: used, mileage: 169,850 km, power: 368 kW (500.34 HP), first registration: 01/2022, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ZF - Intarder, power take-off, emergency braking assistant, lane departure warning, adaptive cruise control, stability control, hill start assist, ABS, ASR, rear differential lock, air conditioning, auxiliary heating, multifunction steering wheel, adjustable steering column with tilt and reach, instrument cluster with 8'' display, multimedia display with 7.2-inch LCD touchscreen, Android Auto, Apple CarPlay compatibility and Bluetooth, navigation system, hands-free system, electric sliding/tilting roof made of glass, driver's comfort suspension seat, 2x sleeping beds, comfort mattress, storage compartments above the upper bed, cool box, central locking with remote control, rain sensor, fog lights, LED headlights, LED daytime running lights, headlight bar, fender surround, battery isolator switch, hydr. Connection for a dual-circuit trailer, square aluminum tank, approx. 740 liters, aluminum rims, air suspension with rear axle lifting and lowering device, vehicle can be covered with advertising and/or lettering. Dslrsv Rui Nod I T Docg Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: new, Year of construction: 2024, HD-F fiber laser cutting systems Durma fiber laser cutting machines feature faster cutting and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting machines, you are provided with quality, performance and efficiency at the same time, which increases your business value. Thanks to high-precision helical gears, very high acceleration values (28 m/s2), high movement speed (170 m/min) and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design and efficient and user-friendly structure. X axis: 6000 mm Y axis: 3000 mm Z axis 125 mm Max. sheet dimension: 6048x2024 mm Max sheet weight: 200 kg/m2 X axis: 100 m/min. Y axis: 120 m/mm. Synrochnization: 156m/min. Acceleration: 16m/s2 positioning accuracy: + 0,05 mm Repeatability: +0,05 mm Cutting thickness Delrd Iog Adu Ho T Dscg mild steel: 25 mm Stainless steel: 15 mm Aluminium: 20 mm Standard equipment Automatic shuttle table Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameters

Condition: used, mileage: 1,170 km, power: 375 kW (509.86 HP), first registration: 08/2024, overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, next inspection (TÜV): 08/2025, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Multifunction steering wheel, windscreen sun visor, door side window sun blinds, cool box, MAN sound system, side camera system (SCS) ## SEE DOCUMENTS ## Müller 12105900 Dslrsv Ndq Hed I T Dscg

Condition: used, color: blue, Year of construction: 2016, Year of manufacture: 2016 GVW: 42.000 kg Price: On request Faymonville F-S43-1ABA. Year: 2016. 10 tons SAF axles. Max weight: 42.000 kg. Kingpin load: 18.000 kg. Powersteering 3 steering axles. Airsuspension. Winch. EBS ABS ALB. Hydraulic works on Duplo electricty. Hydraulic bridge from floor to neck. Lenght: 3000 mm. Central greasing system. 2 point hydraulic outriggers on the back. Dslrewbn Tzed I T Decg 2 way hydraulic ramps: - hydraulic from left to right. - lenght: 2800 + 1700 mm. Dimmensions: Neck: L: 3800 mm. W: 2480 mm. H: 1400 mm. Kingpin load: 1150 mm. Floor: L: 9600 mm. W: 2550 mm. H: 900 mm. Tyres: 235/75R17,5 70%. German Trailer! ID NR: 449. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: defective spare-parts repository (used), Year of construction: 2015, operating hours: 56 h, Functionality: not functional, machine/vehicle number: 433760 EDIPA, power: 228 kW (309.99 HP), fuel type: diesel, number of cylinders: 6, nominal power: 261 kW (354.86 HP), rotational speed (min.): 1,470 rpm, rotational speed (max.): 2,100 rpm, type of cooling: water, Selling our defective sprinkler motor. It seized due to overheating after approximately 56 hours of operation, as the pipe was unfortunately defective. The unit is being sold defective and without any warranty or return. Dolrewbc A Rod I T Djcg Subject to errors and prior sale.

Condition: excellent (used), Roell Amsler 50 DSM 6100-F creep testing machine 50 kN Roell Amsler 50 DSM 6100-F creep testing machine Principle of operation: A creep test is the strength test under static loading and constant temperature. The plastic deformation of the specimen is measured. In addition to tests on solid specimens, the creep behavior under compressive loading can also be determined on foams (e.g. core materials for layered composites). Application: Long-term behavior under load of plastics and metals at constant elevated temperature. Measuring range: Force range: 0.5kN - 50 kN Measuring range strain transducer: 10 mm Temperature range: up to 500 degrees Dslepy Dt Uord I T Dscg Specimen requirement: Round specimen: 14.7 x 180 mm flat specimen or cuboid: max. 50 x 50 x50 mm Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), AUTOMATIC machine for DOVETAIL JOINTS with 8 spindles model OMEC F8 second hand machine machine is utilised to indent dovetails for drawers and various furniture elements Dcslokziqljrd I T Dog the machine is equipped with a unit of 8 spindles Technical Details : number of spindles n.8 spindles revolutions rpm 17.000 max. working width mm.400 min. working width mm.50 min. front thickness mm.7 max. front thickness mm.16 center to center indents mm.25 on board machine installed power Kw. 7,5 (Hp 10) net weight kgs. 1000 volt. 380/50 overall dimensions : cm. 150 x 100 H=cm.120

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Delogk Nlpsrd I T Djcg Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

Condition: used, mileage: 36,633 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 03/2021, next inspection (TÜV): 04/2026, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), New tipper body 06/23 Trailer hitch, rigid, two 12 V sockets in the cab, plastic toolbox (right) for Scattolini tipper body Delrd I Tjl Hzfij Djcg

Condition: like new (used), Functionality: fully functional, mileage: 10,000 km, power: 367.75 kW (500.00 HP), first registration: 12/2024, fuel type: diesel, color: orange, axle configuration: 4x2, tire size: 385/65 R 22.5 + 315/80 R 22.5, wheelbase: 3,600 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, machine/vehicle number: NM0KCXTP6KPT96916, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, onboard computer, parking heater, sleeping cabin, soot filter, spoiler, traction control, NM0KCXTP6KPT96916 - Reference PT-073 - Warranty until 3/12/2027 Dcolrd Iswa Tgde T Dsg STANDARD EQUIPMENT: Air-sprung cabin ▪ Automatic climate control ▪ Bed zone remote control ▪ black grille ▪ body-coloured exterior mirror cap ▪ body-coloured front bumper ▪ body-coloured bonnet ▪ cruise control & speed limiter ▪ driver's seat - heated & air suspension ▪ Dry air cabin heating ▪ EBC (electronic braking system) ▪ Electrically heated and electrically adjustable mirrors ▪ Electrically operated sliding roof ▪ front & rear protection against underruns ▪ long front bumper ▪ switchable air compressor ▪ maintenance-free front wheel bearing ▪ wheel chock ▪ DAB radio ▪ 2.64 FDR OPTIONAL EQUIPMENT: CB Radio antenna ▪ Luxury pack for balloon front tires: refrigerator, navigation ▪ 4 Bellows air suspension (C4AS) ▪ PTO Offset NH4C ▪ Fifth wheel 1200m ▪ 19T MTM ▪ 385/65 Pirelli front tires ▪ XSS-470 rear axle ▪ Aluminum rims Discover our dealers via the website fordtrucksbelux.be Interested? Feel free to contact us: - Herman Noyens Trucks NV

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Dsljwbfigsrd I T Decg Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. Dcolrded N Rfdo I T Dsg -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Basic equipment: -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting - Remote control: Remote maintenance Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera

Condition: new, Year of construction: 2024, Functionality: fully functional, laser power: 30 W, sheet thickness aluminum (max.): 50 mm, sheet thickness steel (max.): 80 mm, The Durma HD-F 3015 Fiber laser cutting machine in 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine developed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability and outstanding customer service. Features: 30 kW / 80 mm mild steel 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal distance F300 mm Conveyor system Technical data: Power: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis stroke: 160 mm Maximum synchronous speed: 170 m/min Maximum synchronous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeat accuracy: +/- 0.02 mm Product description of the Durma HD-F 3015 in 30 kW: Powerful and Efficient: equipped with a 30 kW fiber laser, the Durma HD-F 3015 offers outstanding cutting performance and precision for a wide range of materials, including steel, aluminum and copper. Spacious work area: With a work area of 3000 x 1500 mm, this machine is ideal for processing both large and small workpieces. Dcolreq Nl T Ted I T Djg Advanced CNC control: The user-friendly and precise control allows for easy handling and optimizes cutting paths to minimize material waste. Automatic nozzle changing system: This feature increases productivity and reduces downtime when changing cutting nozzles. Energy efficiency: The laser is characterized by high energy efficiency, resulting in lower operating costs. Robust design: The machine impresses with its durability and reliability, even under demanding working conditions. Safety: Comprehensive safety functions ensure safe operation. Versatility: Compatible with various laser cutting software solutions, it is suitable for a wide range of industries. Durma Maschinen GmbH - your reliable partner: As the manufacturer of the Durma HD-F 3015, we, Durma Maschinen GmbH, pride ourselves on our fast and efficient service and our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure that our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting needs. Interested in the Durma HD-F 3015 in 30 kW? Contact us for a no-obligation consultation or a customized quote. At Durma Maschinen GmbH, we will be happy to answer all your questions and find the best solution for your needs. We look forward to your inquiry!

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 15 mm, sheet thickness brass (max.): 20 mm, working range: 3,050 mm, overall weight: 12,000 kg, warranty duration: 12 months, repeat accuracy: 5 mm, sheet thickness (max.): 30 mm, positioning speed: 5 m/min, Equipment: safety light barrier, Make: DURMA Type: HD-F 3015 III Fiber Working range X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 30 mm Sheet thickness stainless steel: 26 mm Sheet thickness aluminum: 15 mm Sheet thickness brass: 20 mm Sheet thickness copper: 15 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dedusting Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto nozzle changer (Nozzle Changer) The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request. Dcelrdjdx Nalo I T Dsg

Condition: new, Year of construction: 2024, Flatbed laser HD-F 3015 15 kW laser cutting system . Technical details: - Max. Sheet metal size: 12,000 mm x 2,000 mm Max. - Max. sheet weight: 235 kg/m² -Laser power (IPG): 15 kW -travel Z - axis: 125 mm -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Cutting range: - steel: 40 mm - Stainless steel: 30 mm - Aluminium (AlMg3): 30 mm Equipment: IPG 15000W Fiber Laser Source (Cooler included) Compact dust extraction (filter) Air conditioner in control cabinet Flatbed laser with automatic shuttle table Dolrsgyfm Esd I T Decg Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Auto focusing Precitec Procutter cutting head F150 focus Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal inspection (Autom. sheet metal position and sizes measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication system Motorized chip conveyor Simple user interface parameter page (power-speed-pressure) Lantek or Metalix Cad/Cam software with Autonesting Lighting for the working area Multi-chamber suction system Warning light Special laser cutting options Positioning laser diode Pierceline (piercing settings) Focusline Plasmaline Fastline Flyline Training support for Cad/Cam programming Application training Remote maintenance

Condition: new, Year of construction: 2024, Tube and flatbed laser 4 kW | Combi HD-F 3015 BH Laser combination machines Machine dimensions: - (L x W x H) 9,350 mm x 3800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. sheet weight: 200 kg/m² -Laser power (IPG): 4 kW -travel Z - axis: 125 mm -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Cutting area: - steel: 20 mm - stainless steel: 10 mm Djlrdjfl T T No I T Decg - Aluminium (AlMg3): 12 mm - brass: 10 mm - copper: 6 mm Equipment: IPG 4000W Fiber Laser Source (including cooler) Compact dust extractor (filter) for 4 kw Air conditioning in switch cabinet Flatbed laser with automatic shuttle table Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Auto focusing Precitec Procutter F150 focus cutting head Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal testing (Autom. sheet metal position and size measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface parameters page (performance-speed-pressure) Software Lantek or Metalix Cad/Cam Software with Autonesting Lighting for the work area Multi-chamber suction system warning light Special Laser Cutting Options Positioning laser diode Pierceline (E

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-F 3015 III Fiber Year of manufacture: 2024 Working range X-Y-Z: 3060x1530x160 mm Laser power: 4000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 10 mm Dcjlrd Isd Sd Tnj T Deg Sheet thickness aluminum: 12 mm Sheet thickness brass: 10 mm Sheet thickness copper: 6 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 4000 Watt including cooler Filter, compact dedusting Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto. Nozzel Changer (nozzle changer) Camera Inside The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.