Used Schaffer 9300 Z for sale (11,398)

Condition: used, Year of construction: 2001, x-travel 800 mm y-travel 400 mm z-travel 400 mm Deb Exowhzq Tsrbaokl weight of the machine ca. 2,2 t dimensions of the machine ca. 2 x 2 x 3,5 m Werth Video Check IP 800 3D CNC measuring machine, built in 2001, retrofitted in 2016 No longer in operation for several years due to discontinuation of the parts. Software version: WinWerth 8.34

Condition: excellent (used), Machine type CNC lathe Manufacturer: Mori Seiki Type: NLX2500Y/700 Year of manufacture: 2018 Control type: Celos Origin: Japan Storage location: Germany Delivery time: from stock Turning diameter max. approx. 366mm Standard turning diameter approx. 275mm Chuck size approx. 250mm Turning length approx. 705mm Bar diameter max. approx. 80mm Turret stations 12 X-axis approx. 260mm Z-axis approx. 795mm Y-axis approx. 100 (+-50)mm Tailstock approx. 734 mm Spindle speed max. approx. 4,000 rpm Dob Exswhzhxjrbajkl AGW speed max. approx. 10,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Main spindle ISM 80, 15/18.5/18.5 kW, 4,000 rpm - Hollow clamping cylinder for chuck - Double foot switch - Y-axis with 100 mm travel - Rotating tools with 40/14 Nm, 10,000 rpm - 12-way BMT60 star turret - Extended overhang length of 100 mm - NC tailstock cone for a rotating center MK 5 - Hinge belt chip conveyor - Coolant pump (0.8 kW} 5 bar - MABEO filter unit with 1.5 MPa - Signal lamp - Integrated parts catcher - Electric 1/F for multi-channel bar feed - Alternating speed - Milling functions for pockets and islands - Fast fixed cycles (Errors in the technical data and information excepted)

Condition: excellent (used), Year of construction: 2011, CNC Lathe NEF 400 2011 With driven tools Technical specifications: Turning diameter 350 mm Turning length 650 mm Swing diameter over bed 385 mm Swing diameter over cross slide 350 mm Distance spindle nose to tailstock 902.5 mm Coc Eg S Rrsv Umldegerb Main spindle: Speed range - main spindle 0 - 4,000 rpm Drive power - main spindle 15.3 / 11.5 kW Max. torque 430 Nm Spindle diameter in front Bearing 100 mm Spindle bore 87 mm Max. bar diameter 52 mm Usable bar diameter 52 (45) mm Dsb Exrswhxkdsbaekl Max. chuck diameter 250 mm Chuck diameter 165 mm Spindle head 170 h5 C-axis 0.04 ° Tool turret: Number of tool positions: 12 positions Shaft diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6 positions Speed range - driven tool stations max. 4,500 rpm Drive power of driven tool stations: 5.5 kW Travels: X-axis 255 mm Z-axis 800 mm Tailstock: Tailstock travel 680 mm Tailstock mount MT 4 Clamping pressure 6.8 kN

Condition: excellent (used), Year of construction: 2018, This Hurco VM30i Vertical Machining Centre (2018) is available to purchase immediately. All viewings are by appointment only. Spindle Hours 3186 X Axis Travel 1270mm Y Axis Travel 508mm Z Axis Travel 508mm Table Size 1,321mm x 508mm T Slot Size 5 slots, 18mm wide Maximum Table Load 1,800kg Maximum Spindle Speed 12,000 RPM Spindle Power 15kW Tool Type BT40 Number of Tools 24 Maximum Tool Diameter 80mm Maximum Tool Length 250mm Maximum Tool Weight 7 KG Rapid Traverse Rates (X, Y, Z Axis) 28 m/min Maximum Programmable Feedrate 28 m/min Spindle Nose to Table Distance 102 mm Spindle Torque 82.3 Nm 1,740 rpm Machine Weight 4,320 kg Machine dimensions (LxWxH) 4,086mm x 3,312mm x 2,543mm Swarf Conveyor Swarf Skip 20x BT40 Tooling Package. BT40 Swing Arm Spindle Chiller Coolant Washdown Hurco Winmax 5 Twin Screen Control Djb Eewid Drsxrbajkl Hurco Stackable Vice Auxilliary Graphics Screen Classic Package: Air Hose and Pistol Assembly Anti Fatigue Mat 120 GB Solid State Hard Drive 3.5GB Ram True Type Engraving High Resolution 3D Rendered Graphics Real time tool simulation USB Port High Speed Profiling software with S curve acceleration with selectable surface finish quality Software Options Include: Advanced Verification Graphics DXF software NC Productivity package Ultipockets Insert Pockets Rigid Tap Helical Ramp Airblast Ethernet Networking and Remote Diagnostics Hurco Height Setter Gewefa 3D Part Setter Adapt ipath NC Conversational Merge Selectsurface Finish Quality Tool and Material Library UltiMotion Tool Change Optimisation

Year of construction: 2007, Condition: used, Max. machining length: 2,600 mm Y-axis travel: 315 mm Z-axis travel: 230 mm Milling spindle speed infinitely adjustable between 2,800 and 12,000 rpm Dkeb Exrslp Uz Aebael Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping X and Y-axis CNC controlled, Z-axis continuously lowerable by motor 4 pneumatic material clamps Manual tool change Minimum quantity spray device USB port operation manual Accessories as per photo

Condition: used, Year of construction: 2008, operating hours: 10,840 h, Field of application: Construction Serial number: HCMBCF00T0002xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18984 Specifications: - 2008 model - Hours: 10,840 - 90.2 kw - Weight: 19300 kg - Central grease - Digging bucket - Tooth bucket - Narrow bucket - Changed engine at 10,000 hours - Newly overhauled belt drive when the engine was replaced - Undercarriage (see pictures) - Belt width: 60 cm - Machine width: 281 cm - Rotor lamp - Services taken by owner - Delivery by agreement Description: 2008 Hitachi ZX180-LC3 kept in good condition by owner. The engine was replaced at 10,000 hours complete new engine was mounted,  and at the same time the belt transmission was overhauled. See video. Dob Exrovg Ar Dobaokl Delivery by agreement. Hours: 10840 Total Weight: 19300 Width: 281 Kw: 90,2

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Dkjbov Ehawe Exrbael Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Year of construction: 2017, operating hours: 5,010 h, Condition: used, machine/vehicle number: HM1-1304, Turning diameter: 330 mm, turning length max.: 600 mm, travel (X/Z): 165+35/600 mm, B-axis, bar capacity: 52 mm, speed: max. 6,000 rpm, control FANUC Series 0i-TF, 12-station tool turret with driven tools, chip conveyor, machine weight: approx. 6,000 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkeb Exjwh Tyterbaol

Condition: good (used), Year of construction: 2017, CNC Lathe - Horizontal Manufacturer: HWACHEON Machine Model: HI-TECH 450 BL YMC Control: Fanuc i-Series Year of Manufacture: 2017 TECHNICAL DATA Max. Turning Length: (mm) 1,214 Max. Turning Diameter: (mm) 420 Chuck Size: (mm) 305 Max. Turning Diameter Over bed: (mm) 700 Travel paths - X-axis: (mm) 280 - Y-axis: (mm) 120 - Z-axis: (mm) 1,390 Rapid traverses - Rapid traverse X/Y/Z: (m/min) 20 / 10 / 24 Spindle - Bar capacity: (mm) 89 - Max. speed: (rpm) 2,500 - Drive power: (kW) 22 / 18.5 - Torque: (Nm) 1,050 / 883.8 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: BMT-65 EQUIPMENT FEATURES Djb Exewhpgcorbaekl + Flat guideways + C-axis + Y-axis + Blow-out gun + Steady rest carrier (suitable for SMW Autoblock) SLU-X-3-Z501215Z (SMW steady rest not included) + Manual steady rest, manufacturer RICHTER + Chip conveyor + Automatic tailstock and quill + Work light + Coolant tank capacity: 240 liters Power consumption: 55 kVA Weight: approx. 7,800 kg

Condition: good (used), Year of construction: 2012, x-travel 900 mm y-travel 800 mm z-travel 1020 mm b-axis 360 ° Control Professional 5 Fanuc size of pallet 630 x 630 mm spindle taper HSK-A100 spindle turning speed range 20-10.000 U/min Spindlemotor 35/25 kW max. torque on the spindle 488/305 Nm feed speeds 50.000 mm/min table load 1,2 t 0 d1.000 x h1.300 mm tool magazin: 97 pcs. tool length - max. 690 mm diameter of tools max. 100/300 mm weight of tools max. 30 kg weight of the machine ca. 20 t dimensions of the machine ca. LBH 6,0 x 4,3 x 3,3 m Incl. chip conveyor Incl. high pressure cooling system Incl. spindle cooling Machine run on aluminum Dob Eju U Ufgexrbajkl Processing time: 23,350 hours

Condition: used, Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller manufacturer: FANUC, controller model: 310 IS, total height: 1,980 mm, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, space requirement length: 3,000 mm, space requirement width: 2,400 mm, CONTROLS .. CNC controls FANUC 310 IS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 600 mm .. Y-axis travel: 410 mm .. Z-axis travel: 460 mm .. rotating range A-axis from: -30 ° .. rotating range A-axis up to: 120 ° TABLE .. clamping surface diameter: 350 mm SPINDLE / HEAD .. spindle revolutions (max): 12000 /min .. drive power: 18 kW Dobsvylpxe Exrbaokl AXIS DRIVES .. rapid traverse: 4800 mm/min TOOL MAGAZINE .. number of positions: 30 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3000 mm .. space requirements -front/back-: 2400 mm .. total height: 1980 mm .. total weight approx.: 7500 kg Operating hours: 35`000h Inklusieve: Vices see picture

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles FORM 3000 Year of manufacture 2008 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Djb Exrbewh Smrsajkl Integrated C-axis for rotation, indexing, and erosion (0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Includes CAPA Electrode changer - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: like new (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm Dsbsvzhhms Exrbaskl max. module 13 min. module 2 control SINUMERIK 840 D min. number of teeth 5 max. number of teeth 2000 transmission ratio 1:10 b-axis -5 / +90 ° total power requirement 75 kW voltage 400 V voltage 230 V weight of the machine ca. 9,4 t dimensions of the machine ca. 4,7 x 3,6 x 2,82 m Gleason-Pfauter 275 HC - NC bevel gear milling machine - Year of manufacture: 2002 - Equipped for milling with oil - Integrated magnetic chip conveyor, without cutter head + holders Technical data 275 HC: (workpiece) - Maximum transmission ratio --> 1:10 - Minimum number of teeth --> 5 - Maximum number of teeth --> 2000 - Maximum tooth height / full tooth depth --> 20 mm - Maximum tooth width --> 58 mm - Maximum pitch circle diameter --> 275 mm (tool) - Smallest permissible milling head Ø --> 2.5 inch - Largest permissible milling head Ø --> 9 inch (machine) -> slide path 325 mm - Vertical workpiece slide (Y-axis) --> 350 mm - Milling slide (Z-axis) --> 475 mm -> Largest basic angle 90° - Direction -B --> -5° -> Workpiece table 212.71 mm (speeds) -> feeds 1 - 6,000 mm/min -> rapid traverse 10,000 mm/min - B-axis --> 40 °/s -> Speeds 0 - 1,100 min/-1 - Workpiece table --> 0 - 1,100 min/-1 Translated with (free version)

Year of construction: 2004, operating hours: 27,349 h, Condition: used, machine/vehicle number: AN0184, Turning diameter: 280 mm, turning length: 550 mm, travel (X/Z): 200/570 mm, C-axis, FANUC Series 21i-TB control, 12-station tool turret with driven tools, maximum speed: 5,000 rpm, chip conveyor, machine weight: approx. 5,500 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkjb Eswh Tymoxrbael

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Dkebev Rxa Ss Exrbasl Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231259, Hermle C600 U, built in 2005, without Cellro magazine, with FANUC robot, without Lang loader (Cellro magazine with FANUC robot and Lang loader can be purchased optionally) Siemens 840 d control system Operating hours: 78,025 Spindle ON: 17,382 Drives ON: 37,955 Tool change: 586,110 NC software: 05.03.39 PLC software: 05.03.21 18,000 SK40 spindle Laser tool breakage monitoring Sensor Oil mist extraction Chip flushing gun X travel: 600 Y travel: 450 Z travel: 450 Rapid traverse in X/X/Z: 35 m/min Infinitely variable spindle speed Weight: approx. 6,700 kg Chip conveyor on the left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Coolant system standard - Chip conveyor - Enclosed cabin roof section - Electronic thermal compensation (iTNC) - Electronic manual control module (iTNC) - Tool breakage monitoring - Chip flushing gun - Foot switch for clamping/unclamping - 200 bar hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - X/Y/Z measuring system: 0.1 µm Optionally available: Cellro magazine, built in 2005, automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot • Type: Automated storage system (robot magazine) • Capacity: 300 tool holders (for storage and quick tool exchange) Optionally available: LANG Technik automation system with slide arrangement, built in 2005, storage capacity of approximately 50-60 clamping vises. Dimensions & weight of the machine tool: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information, as well as prior sale! Hermle C600 U, year 2005, without Cellro magazine, with FANUC robot, without long loader (Cellro magazine with FANUC robot and long loader can be purchased as an option) Dksb Exrjwh Sbijbajl Siemens 840 d control system Operating hours: 78025 Spindle ON: 17382 Drives ON: 37955 Tool change: 586110 NC software: 05.03.39 PLC software: 05.03.21 18,000 Spindle SK40 Tool breakage monitoring Laser Probe Oil mist extraction Chip flushing gun X-path: 600 Y-path: 450 Z-path: 450 Rapid traverse in X/X/Z 35 m/min Stepless spindle speed Weight approx. 6700kg Chip conveyor left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Standard coolant unit - Chip conveyor - Closed cabin roof section - Electronic thermal expansion compensation (iTNC) - Electronic manual control module (iTNC) - Breakage monitoring tool - Chip flushing gun - Foot switch for clamping/unclamping - Hydraulic unit 200 bar for clamping/unclamping Traverse paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z axis (vertical): 450 mm Table: - Clamping surface: 800mm x 465mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Optionally available: Cellro magazine built in 2005 automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot - Type: Automated st

Condition: refurbished (used), Year of construction: 2019, Functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Dkjb Eswh Sigexrbajl Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: used, Year of construction: 2006, max. wheel diameter 150 mm Dkeb Exsub Amrorbasl gear width 100 mm max. module 3 min. module 1 x-travel 190 mm y-travel 160 mm z-travel 100 mm turning speeds 5200 U/min swivel angle for work spindle +/- 40 ° weight 8,5 t with KUKA robot loading system TWIN-SPINDLE TECHNOLOGY The twin-spindle concept significantly shortens the cycle time and guarantees the high production output of the Reishauer generating grinding machine. During the grinding of a gear, the previously ground workpiece is unloaded on the second workpiece spindle workpiece is unloaded, the next gear to be ground is loaded and centred. REISHAUER GEAR HOBBING MODULE The generating module coordinates the complex axis movements of the generating grinding process and generates the exact geometry of the workpiece. Reishauer relies exclusively on the hobbing module developed in-house. This makes us more precise and continue to set the technological standards. REVOLUTIONARY PROCESSES Thanks to the targeted further development of the grinding process, Reishauer has been the technology leadership in the hard fine machining of gears for decades gears. One example of this is grinding with a cutting speed of 100 metres per second, polishing grinding and topological grinding. Equipment/accessories: - Turret with 2 workpiece spindles and dressing unit - Counter holder - 3 workpiece clamping devices - Centre unit with sensor - Hoffmann filter unit - 1 flange with grinding disc - Kuka robot - Safety devices for transport - documentation --> Grinding with LNS1 is possible on this machine. What is not possible istwist control grinding

Year of construction: 2012, operating hours: 8,758 h, Condition: used, machine/vehicle number: AT0602, Turning length: approx. 700 mm, turning diameter max.: 400 mm, travels (X/Y/Z): approx. 275/80/700 mm, 16-station tool turret with driven tools, C/A axis, control FANUC Series 31i-Model A, counter spindle, 12-station tool turret, with driven tools, speed: max. 5,000 rpm, tool holder: VDI 30, chip conveyor, Caution: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dksb Exrbswh Tygsajl

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm Dkob Exrbev Rpr Seasl T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. Dkebjwh Safs Exrbaol • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° Dobeul Etde Exrbaokl - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Dob Exrswh Tyysbaokl

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown Dkjb Eeucphxjxrbael

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dob Exrswh Ty Hsbaskl