Used Schaffer 8600 Z for sale (11,356)

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Dksb Hswh Tyyocnqmol

Condition: used, Year of construction: 2022, Working dimension X: 2.500 mm Working dimension Y: 1.000 mm Working dimension Z: 80 mm Number of milling spindles: 2 Main motor power: 3,3 kW Rotation speed max: 18.000 rpm 4th axis: Yes Horizontal drilling spindles in Y: 1 Cantilever machine: Yes Machine table: Feed-through technology Special workpiece clamping system: For doors Outfeed: vacuum lifter Milling for fittings: Yes Dkeb Hcnjwigt Noqmel Insert fittings: Yes Control: PC control Conformity marking: CE mark Space requirement Length: 9,7 m Space requirement Width: 4,1 m

Condition: good (used), Year of construction: 2017, CNC Lathe - Horizontal Manufacturer: HWACHEON Machine Model: HI-TECH 450 BL YMC Control: Fanuc i-Series Year of Manufacture: 2017 TECHNICAL DATA Max. Turning Length: (mm) 1,214 Max. Turning Diameter: (mm) 420 Chuck Size: (mm) 305 Max. Turning Diameter Over bed: (mm) 700 Travel paths - X-axis: (mm) 280 - Y-axis: (mm) 120 - Z-axis: (mm) 1,390 Rapid traverses - Rapid traverse X/Y/Z: (m/min) 20 / 10 / 24 Spindle - Bar capacity: (mm) 89 - Max. speed: (rpm) 2,500 - Drive power: (kW) 22 / 18.5 - Torque: (Nm) 1,050 / 883.8 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: BMT-65 EQUIPMENT FEATURES + Flat guideways + C-axis + Y-axis + Blow-out gun + Steady rest carrier (suitable for SMW Autoblock) SLU-X-3-Z501215Z (SMW steady rest not included) + Manual steady rest, manufacturer RICHTER + Chip conveyor + Automatic tailstock and quill Dksb Hcnqewhpgcemsl + Work light + Coolant tank capacity: 240 liters Power consumption: 55 kVA Weight: approx. 7,800 kg

Condition: good (used), Year of construction: 2012, x-travel 900 mm y-travel 800 mm z-travel 1020 mm b-axis 360 ° Control Professional 5 Fanuc size of pallet 630 x 630 mm spindle taper HSK-A100 spindle turning speed range 20-10.000 U/min Spindlemotor 35/25 kW max. torque on the spindle 488/305 Nm feed speeds 50.000 mm/min Dkebsu U Ufgs Hcnqmsl table load 1,2 t 0 d1.000 x h1.300 mm tool magazin: 97 pcs. tool length - max. 690 mm diameter of tools max. 100/300 mm weight of tools max. 30 kg weight of the machine ca. 20 t dimensions of the machine ca. LBH 6,0 x 4,3 x 3,3 m Incl. chip conveyor Incl. high pressure cooling system Incl. spindle cooling Machine run on aluminum Processing time: 23,350 hours

Condition: used, Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller manufacturer: FANUC, controller model: 310 IS, total height: 1,980 mm, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, space requirement length: 3,000 mm, space requirement width: 2,400 mm, CONTROLS .. CNC controls FANUC 310 IS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 Dsbsvylpxj Hcnqmjkl .. X-axis travel: 600 mm .. Y-axis travel: 410 mm .. Z-axis travel: 460 mm .. rotating range A-axis from: -30 ° .. rotating range A-axis up to: 120 ° TABLE .. clamping surface diameter: 350 mm SPINDLE / HEAD .. spindle revolutions (max): 12000 /min .. drive power: 18 kW AXIS DRIVES .. rapid traverse: 4800 mm/min TOOL MAGAZINE .. number of positions: 30 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3000 mm .. space requirements -front/back-: 2400 mm .. total height: 1980 mm .. total weight approx.: 7500 kg Operating hours: 35`000h Inklusieve: Vices see picture

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles FORM 3000 Year of manufacture 2008 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Dkjb Hswh Smrjcnqmjl Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Includes CAPA Electrode changer - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Djb Hswh Ty Hjcnqmskl

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable, Top and bottom Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Dowel insertion: Yes Dowel diameter: 8 mm Dowel length max: 40 mm Safety device: enclosed cabin Milling for fittings: Lamello Clamex Interface for .dxf data: Yes Control: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP, HOMAG tapio ready, HOMAG WOODWOP 8.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 18 kW Weight: 3.975 kg Space requirement Length: 4,8 m Dksb Hewa Skbocnqmjl Space requirement Width: 2,4 m Space requirement Height: 2,5 m

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Dkobjv Rxa Ss Hcnqmel Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231259, Hermle C600 U, built in 2005, without Cellro magazine, with FANUC robot, without Lang loader (Cellro magazine with FANUC robot and Lang loader can be purchased optionally) Siemens 840 d control system Operating hours: 78,025 Spindle ON: 17,382 Drives ON: 37,955 Tool change: 586,110 NC software: 05.03.39 PLC software: 05.03.21 18,000 SK40 spindle Laser tool breakage monitoring Sensor Oil mist extraction Chip flushing gun X travel: 600 Y travel: 450 Z travel: 450 Rapid traverse in X/X/Z: 35 m/min Infinitely variable spindle speed Weight: approx. 6,700 kg Chip conveyor on the left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Coolant system standard - Chip conveyor - Enclosed cabin roof section - Electronic thermal compensation (iTNC) - Electronic manual control module (iTNC) - Tool breakage monitoring - Chip flushing gun - Foot switch for clamping/unclamping - 200 bar hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - X/Y/Z measuring system: 0.1 µm Optionally available: Cellro magazine, built in 2005, automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot • Type: Automated storage system (robot magazine) • Capacity: 300 tool holders (for storage and quick tool exchange) Optionally available: LANG Technik automation system with slide arrangement, built in 2005, storage capacity of approximately 50-60 clamping vises. Dimensions & weight of the machine tool: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information, as well as prior sale! Hermle C600 U, year 2005, without Cellro magazine, with FANUC robot, without long loader (Cellro magazine with FANUC robot and long loader can be purchased as an option) Siemens 840 d control system Operating hours: 78025 Spindle ON: 17382 Drives ON: 37955 Tool change: 586110 NC software: 05.03.39 PLC software: 05.03.21 18,000 Spindle SK40 Tool breakage monitoring Laser Probe Oil mist extraction Chip flushing gun X-path: 600 Y-path: 450 Z-path: 450 Rapid traverse in X/X/Z 35 m/min Stepless spindle speed Weight approx. 6700kg Chip conveyor left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Standard coolant unit - Chip conveyor - Closed cabin roof section - Electronic thermal expansion compensation (iTNC) - Electronic manual control module (iTNC) - Breakage monitoring tool - Chip flushing gun Dkeb Hcnewh Sbisqmsl - Foot switch for clamping/unclamping - Hydraulic unit 200 bar for clamping/unclamping Traverse paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z axis (vertical): 450 mm Table: - Clamping surface: 800mm x 465mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Optionally available: Cellro magazine built in 2005 automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot - Type: Automated st

Condition: good (used), Year of construction: 2014, Mfd. 2014 Dkob Hcnevzb S Seqmel Cutting area X axis 1'800 mm Y axis 1'800 mm Z axis 1'210 mm A axis +/- 105 ° C axis 360 ° Spindle Main drive Spindle power 94 / 113 kW Spindle speed 12'000 min-1 Torque spindle max. 300 / 410 Nm DDT Spindle power 105 / 125 kW Spindle speed 3'000 min-1 Torque spindle max. 844 / 1'202 Nm DDT Spindle power 63 / 75 kW Spindle speed 14'000 min-1 Torque spindle max. 200 / 275 Nm NC Rotary table Dimension milling ø 1'400 x 1'200 mm Dimension turning ø 1'400 / ø 1'800 mm Max. Rotary diameter ø 1'900 / ø 2'200 mm Tool changer Tool changer, places 92 / 204 Max. tool length 600 mm Max. tool diameter 125 / 250 mm Control Heidenhain TCN640 Siemens 840D sl Pallet changer Machine weight ø 1'800 x 1'400 mm Machine weight ø 1'400 / ø 1'800 mm Max. load 4'500 kg Quantity pallets 2 / 3 / 4 / Machine specifications Machine weigth 42'000 kg Dimensions length x width x height 6'200 x 6'500 x 3'900 mm

Condition: refurbished (used), Year of construction: 2019, Functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation Djbswh Sigo Hcnqmjkl - Cooling unit - Dielectric

Year of construction: 1990, Condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Dkobedzy Uyo Hcnqmol Spindelderhzahl 60-1800U/min Working feed 10-3000 mm / min Rapid traverse 10 m / min Table size 1800x610mm Machine weight 9500 kg Table load: 3000 kg

Condition: used, Year of construction: 2015, Working dimension X: 3.740 mm Working dimension Y: 1.570 mm Working dimension Z: 250 mm Independent Z-axes: 2 Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 10 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Dkob Hcnqewidzwemel Tool changer positions: 34 Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Laser setup aid: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Control: PC control Conformity marking: CE mark Total connection: 29 kW

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Dkobsv Rpr Sj Hcnqmel Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Dksbswh Safs Hcnqmel Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Year of construction: 1980, Condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Djb Hcegyy I Aonqmekl Videoconference via whatsapp possible by appointment

Condition: good (used), Year of construction: 1990, CNC Machining Center Deb Hcnqot Rg E Semjkl Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of Manufacture: 1990 Control System: FANUC O-M Travel Ranges: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid Traverse: 24 m/min Feed Rate up to 5 m/min Spindle: Ball Screw: 36 mm Diameter Feed Drives: FANUC AC X/Y-Axis Model 5 Z-Axis Model 10 Main Spindle Revolutions: 100 – 6000 rpm Main Spindle Motor: AC 5.5 kW Main Spindle Taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: +/- 2 sec. Repeatability: +/- 1 sec. Pallet clamping force: 3,400 kg Max. workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Max. tool diameter: 110 mm Max. tool length: 250 mm Max. tool weight: 8 kg Special accessories: Working end indicator with alarm light Magazine for 30 tools Operating hour indicator Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space required: 1,900 x 2,300 mm 080525ä

Condition: like new (used), operating hours: 83,500 h, machine/vehicle number: IntNr231113, IntNo. 231113 Goods tariff number 8457 10 10 00 Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-station plate changer and 4-station pallet station NC rotary table 360° Precision package Tool holders Steep taper: HST 100* DIN 69893 Form A Tool magazine positions chain: 1 x 90 & 1 x 90 Chip conveyor including belt filter from Knoll BILUTEC Air Technology – Filtration Systems Machine number: 28840003102 Year of manufacture: 2001 Control system: Siemens Sinumerik 840D Operating hours: approx. 83,500 h Specifications Technical data Main drive • Direct drive via liquid-cooled, variable-speed induction motor • Speed ranges, continuously programmable: o Operating mode: 0 to 6,000 rpm Dksb Hcnqewh R T Remjl o Setup mode: 0 to 800 rpm o Manual Interventions: 0 to 5,000 rpm • Torque: o S1 – 100% duty cycle: max. 300 Nm (220 lb-ft) o S6 – 40% duty cycle: max. 440 Nm (322 lb-ft) • Power: o S1 – 100% duty cycle: 25 kW (33 hp) o S6 – 40% duty cycle: 37 kW (49 hp) Feed drive • 3-phase AC synchronous servo motors • Feed rate of the X/Y/Z axes: o Continuously programmable: 1 to 40,000 mm/min (0.04 to 1,575 in/min) o Rapid traverse: 40,000 mm/min (1,575 in/min) o Set-up mode: 1 to 2,000 mm/min (0.04 to 79 in/min) o Manual interventions: 1 to 5,000 mm/min (0.04 to 200 in/min) • Feed force: o X/Z axes (100% duty cycle): max. 15,000 N (3,372 lb) o Y-axis (100% duty cycle): max. 10,000 N (2,255 lb) Measuring system • Resolution, smallest input step: o X/Y/Z axes: 0.001 mm (0.0004 in) • Position tolerance (according to VDI/DGQ 3441): o Direct measurement of the X/Y/Z axes: 0.010 mm (0.004 in) o Direct measurement of the B-axis: 14 arc seconds Rotary table • Speed: max. 19 rpm • Clamping force of the pallet: 120,000 N (27,000 lb) • Tilting moment: max. 16,000 Nm (3,520 lb-ft) • Tangential moment: max. 4,800 Nm (3,523 lb-ft) Pallet • Quantity: 1 • Size: 500 x 630 mm (19.7 x 24.8 in) • Permissible load per pallet: o When using 1 pallet: max. 500 kg (1,102 lb) o When using 2 pallets: max. 900 kg (1,984 lb) • T-slots: o Quantity x width: 4 x 14 mm (0.16 x 0.55 in) • Guide slot: o Quantity x width: 1 x 14 mm (0.04 x 0.55 in) Working area • Travel range: o Tool diameter greater than 200 mm (7.87 in): o Tool diameter less than 200 mm (7.87 in): o Asymmetric travel range: o X-axis: 800 mm (31.5 in) o X-axis: mm (+19.7/-15.7 in)  Y-axis: 710 mm (27.9 in)  Z-axis: 710 mm (27.9 in)  B-axis: 360° Machine size: 4,600 x 2,400 x 2,700 mm Machine weight: 10,500 kg 1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg 1x Control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg 1x Chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg 2x Pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg 1x Euro pallet with hydraulic unit 1x Euro pallet with some accessories 1x Euro pallet with covers: L = 200 cm x W = 100 cm 1x Filter holder: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg 1x Tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg 1x rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg Delivery time at short notice upon request. The machine can be inspected by appointment. Subject to changes and errors in the technical specifications and information, as well as prior sale! Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-fold plate changer and

Year of construction: 1996, Condition: good (used), A used CNC machining center MAZAK equipped with: - MAZATROL M32B control - tool magazine 24-fold Deb Hcohl Dbdjnqmokl - chip conveyor - lighting system - clamping system (two machine vices and hydraulic unit) - documentation traverse X/Y/Z 1120/510/510 spindle speed 40-7000rpm spindle mounting BT 40 Further tech. Date see pdf. Document Pure cutting time 7.800 hours Tech. Data and dimensions: Errors excepted.

Condition: good (used), Year of construction: 2006, Vertical CNC Machining Center Manufacturer: MAZAK Type: VC-NEXUS 510 C Year of Manufacture: 2006 CNC Control: Mazatrol PC Fusion CNC 640 M Nexus Working Area: Table Size (Clamping Surface): 550 x 1300 mm Maximum Table Load: 1,200 kg T-Slots: 5 T-Slot Spacing: 100 mm Slot Width: 18 mm Travel Paths X/Y/Z: 1,050 x 510 x 510 mm Rapid Traverse: 36 m/min Feed Rate: 1 – 8,000 mm/min Distance from Spindle Nose to Table: 150 – 660 mm Working Spindle: Speed Range: 35 – 12,000 rpm Tool shank: SK40 Main drive power: 18.5 kW Tool magazine: Tool positions: 30 Max. tool diameter: 80 mm with free extension: 125 mm Max. tool length: 350 mm Max. tool weight: 8 kg Machine weight approx.: 6,900 kg Machine dimensions approx. L/W/H: 3.00 x 2.85 x 2.85 m Accessories: Tool length measuring device Complete coolant system Coolant and chip guard Work area lighting 3.5" floppy disk drive Documentation Special accessories: High-pressure cooling through the spindle, pressure at the pump approx. 15 bar Tornado precision drilling cycle MAZAK Monitoring System B, Renishaw device (M10) Dkeb Hjttv Uhjcnqmel CROMAR chip conveyor, side discharge 080525ä

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN - Swivel head 90° right/left - Large rotary table 800 x1200mm - central lubrication Dksb Hcspai Dhonqmsl - documentation Table size 800x1200mm Table load 1000kg longitudinal movement X- axis 1000mm transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 table feed longitudinal and transversal stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 220cm depth 220cm height 250cm Weight of the machine 3.300 kg Tech. Data and dimensions: Errors excepted

Condition: good (used), Year of construction: 2003, Machining Center Manufacturer: Matsuura Type: H Plus 405 PC6 Year of Manufacture: 2003 CNC Control: Fanuc G-Tech 16i Travel: X/Y/Z: 600 x 600 x 600 mm Table Size: 500 x 500 mm 6-Station Pallet Changer 120-Station Tool Magazine 4th Axis Knoll High-Pressure System Internal Coolant 70 bar 080525ä Dkob Hcnjltlx Noqmsl

Condition: excellent (used), Year of construction: 2012, operating hours: 39,150 h, Functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, A machining center from HURCO, used in very good condition, equipped with WinMax control, IKZ, spindle cooler, paper belt filter, chip conveyor. CNC configuration: - Simulation graphics - DXF - NC production package - Industry Standard NC Deb Hcnqouldhgomekl - Pocket with islands - Synchronous thread - Helix - Tool material database - Tool change optimization - Ultimonitor Table dimensions LxW 1270x610mm Spindle speed max. 12000rpm Spindle holder SK40 Travel X/Y/Z 1060/610/610mm Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Year of construction: 1997, Condition: good (used), A vertical machining center from DECKEL MAHO, used in good condition. Equipment - CNC control PHILIPS DIALOG 112 - Direct path measurement (rulers) Dkobei Dt Dks Hcnqmol - tool magazine - Electronic handwheel - Central lubrication - Spindle cooling - documentation Travel X/ Y/ Z 700/ 550/ 500 mm spindle speed infinitely variable 15.000 rpm table dimensions 900 x 550 mm table load 800 kg working feed X/ Y 1 - 10000 mm/min rapid traverse X Y Z 30 m/min rapid traverse Z 20 m/min tool magazine 30 places Tool holder SK 40 Rated power 50 KVA Rated current 70 A Compressed air supply 6 bar Transport dimensions L x W 3.3 x 2.4 m Machine height 2,6 m Weight of the machine 7000 kg Technical data and dimensions: Errors excepted.