Used Schaffer 5050 Zs for sale (1,915)

Condition: used, Functionality: fully functional, Year of construction: 2012, operating hours: 4,452 h, load capacity: 1,600 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, construction width: 800 mm, net weight: 475 kg, Low lift truck Load centre of gravity: 500 Fpeb Hacov Rtbdoypog Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery Ah: 250Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2012 Battery condition: 40 - 60% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We are happy to enquire for you about leasing & financing as well as delivery at favorable conditions. It is also possible to trade in Linde devices - even without purchasing a device from us. The operating hours shown were read off as of the date of entry. Subject to prior sale, changes and errors.

Condition: good (used), Height 2300 Width 2700 mm Length 2200 mm Weight 5000 kg Voltage Electrical: 400V 50Hz 3N Fpsb Horn S Azjacypsg Installed Power 102 kw Main material Stainlees Steel Cutter Type Vacuum Bowl Cutter Bowl made of Stainless steel Bowl capacity 200 l Knives amount 6 pc. Knife shaft revolutions 680-5050 rpm Bowl revolutions 4-16 rpm

Condition: new, Year of construction: 2025, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure Fpjb Hacyemb U Tbspog • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 9,917 h, load capacity: 3,500 kg, lifting height: 4,830 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery Volt: 80V Fjb Hacysvb Rhcjpepg Battery type: PzS Battery year of construction: 2017 Description: The vehicle is UVV checked Before delivery, the machine gets a service 3rd valve, 4th valve,

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 8,231 h, load capacity: 2,000 kg, lifting height: 6,170 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork length: 1,150 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 200/50-10 Rear tires type: Superelastic Rear tires size: 16x6-8 Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2015 Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used vehicle, even if you don't buy a vehicle from us. Hire purchase & financing at favorable conditions are available on request. We will be happy to advise you competently and in detail about our vehicles. Fpsb Haovxxw Tjcypsg Side shift, 3rd valve, rear work light, front work light, full free lift, safety light, rotating beacon, single pedal, LED, seat,

Condition: used, Functionality: fully functional, machine/vehicle number: FN533703, Year of construction: 2017, operating hours: 14,365 h, load capacity: 2,000 kg, lifting height: 3,180 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift VIN: FN533703 Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Good Fpsb Hajv Nt Dcjcypeg Front Tires Type: Superelastic Rear Tires Type: Superelastic Battery Type: PzS Description: New, Visually and Technically Reconditioned Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Light, Front Work Light, Roof Cover, Windshield, Full Free Lift, Safety Light, Rotating Beacon, Rear View Camera

Condition: used, Year of construction: 2022, construction height: 627 mm, total length: 827 mm, construction width: 627 mm, net weight: 815 kg, Drive battery Battery Volt: 48V Battery Ah: 625Ah Battery type: PzS Battery year of construction: 2022 Fpob Haceuqfnreypeg Battery condition: 80 - 100% Description: suitable for Linde E 16, E 16 P, BR 386 and E 16 C-02 BR 335 and other brands

Condition: used, Functionality: fully functional, Year of construction: 2014, operating hours: 6,689 h, load capacity: 1,500 kg, lifting height: 4,945 mm, free lift: 1,760 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Reconditioned without warranty Technical Condition: Very good Front Tire Type: Super Elastic Front Tire Size: Brand New Black Front Tire Condition: 80 - 100% Rear Tire Type: Super Elastic Rear Tire Condition: 80 - 100% Battery Voltage: 48V Battery Ah: 625Ah Fsbov Ncmmj Hacypspg Battery Manufacturer: Reconditioned and tested Battery Type: PzS Description: Reconditioned, serviced, and tested according to FEM 4.004 (UVV) // Completely repaired and checked - without any warranty. Subject to prior sale. Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light,

Condition: new, Year of construction: 2025, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Fpebemb U Tuj Hacypog Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2025, Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. "Blade Position Adjusting on Power-Off" function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm; sealing bar width: 230mm; max. speed of the machine in neutral: 100 cycles/minute; power: 220V, 3.75kW; infeed length: 3000mm; machine dimensions: L5050xW1190xH1650mm; weight: 1020kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fpobsv Nl Iao Hacypeg

Condition: used, Functionality: fully functional, machine/vehicle number: FN512034, Year of construction: 2016, operating hours: 9,810 h, load capacity: 1,600 kg, lifting height: 4,400 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,000 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift VIN: FN512034 Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Superelastic Rear Tires Type: Superelastic Feb Hsv Nt A Eeacypspg Battery Type: PzS Battery Year of Manufacture: 2016 Description: New, Visually and Technically Reconditioned Sideshift, 4th valve, front work light, roof cover, windshield, full free lift, safety light, rotating beacon, windshield wiper

Year of construction: 2022, Condition: used, total length: 827 mm, construction height: 627 mm, construction width: 735 mm, net weight: 1,071 kg, Traction Battery Battery Voltage: 48V Battery Ah: 750Ah Battery Type: PzS Battery Year of Manufacture: 2022 Battery Condition: 60-80% Fjbev Rta Ts Hacypspg Description: Suitable for Linde E 16L, E 18 L, E 20 L BR 386 and other models, including Aquamatik, cable, and connector. Capacity: 80%

Condition: new, Year of construction: 2025, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Fpsb Hacomb U Tfsypsg • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: used, Functionality: fully functional, machine/vehicle number: FN533706, Year of construction: 2017, operating hours: 9,760 h, load capacity: 2,000 kg, lifting height: 3,180 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift VIN: FN533706 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Fjb Hasv Nt Axscypspg Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Super Elastic Rear Tires Type: Super Elastic Battery Type: PzS Battery Year of Manufacture: 2017 Description: New, Visually and Technically Reconditioned Sideshift, Fork Positioner, 4th Valve, Rear Work Light, Front Work Light, Roof Cover, Windshield, Full Free Lift, Safety Light, Rotating Beacon, 3-Wheel, Body Kit

Year of construction: 2022, Condition: used, total length: 832 mm, construction height: 784 mm, construction width: 631 mm, net weight: 1,145 kg, Traction Battery Battery Voltage: 48V Battery Ah: 775Ah Battery Manufacturer: Hoppecke Battery Type: PzS Battery Year of Manufacture: 2022 Battery Condition: 80-100% Description: Suitable for Linde E 16, E 20 P BR 335 and Linde E 16, 18, 20 H & PH BR 386 including Aquamatik, cable, and connector. 85% performance / Overhauled 03/2025 Fpsbsv Rtays Hacypog

Condition: new, Year of construction: 2025, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. Fpob Hsmcbk Ueacypjg • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture

Condition: used, Functionality: fully functional, machine/vehicle number: FN533704, Year of construction: 2017, operating hours: 5,563 h, load capacity: 2,000 kg, lifting height: 3,180 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift VIN: FN533704 Mast Type: Duplex Fpjbjv Nt Are Hacypog Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Superelastic Rear Tires Type: Superelastic Battery Type: PzS Battery Year of Manufacture: 2018 Description: New, Visually and Technically Reconditioned Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Worklight, Front Worklight, Roof Cover, Windshield, Full Free Lift, Scale, Safety Light, Rotating Beacon, Ravas Scale with Printout

Year of construction: 2020, Condition: used, total length: 827 mm, construction height: 627 mm, construction width: 627 mm, net weight: 815 kg, Traction Battery Fpeb Hjv Rtatjacypeg Battery Voltage: 48V Battery Ah: 625Ah Battery Type: PzS Battery Year of Manufacture: 2020 Battery Condition: 80-100% Description: Suitable for Linde E 16, E 16 P, BR 386 and E 16-18 C-02 BR 335 as well as other brands. 85% performance / Overhaul 03/2025

Condition: new, Year of construction: 2025, Skyrocket your steel cutting productivity and eliminate strenuous labour associated with steel cutting with a semi-automatic saw based on precision servo-motor actuation. Automatic detection of the material placed to cut with the machine setting itself to the shortest cutting stroke needed without you needing to adjust any limit sensors. Automatic detection of saw motor overload and reverse to alleviate. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Fpeb Hacysmcbk Ropjg • Ø400 mm HSS blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Semi-automatic cutting with adjustable saw feed rate and blade RPM (20-100) • Spindle and drive unit immersed in oil solution for smooth performance and long service life • Mitering locking device stops at 45° left straight 90° and 45° right • Industrial ball-screw actuator with servo motor control of the saw stroke • Auto-detect of the material size results in short stroke & cut times without user input • Saw overload detection with feed modulation • Fully integrated flood coolant system • Every new unit comes with brand new HSS blade for ferrous cutting • Optional AS / NZS 4024:2014 safety guard with tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on press of a button • Safety switch disabling the saw operation when guard it up Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales

Year of construction: 2021, Condition: used, total length: 1,023 mm, construction height: 630 mm, construction width: 849 mm, net weight: 1,440 kg, Traction Battery Battery Voltage: 80V Battery Ah: 625Ah Battery Manufacturer: AIM Fjb Hacyjv N R Apspepg Battery Type: PzS Battery Year of Manufacture: 2021 Battery Condition: 80-100% Description: DIN A, suitable for Linde BR 387 E 25L, E 30L, and other brands. Reconditioned with 90% performance.

Condition: new, Year of construction: 2025, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. Fjb Hacyjmb U T Hepepg • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2025, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. Fjbemcaahj Hacypepg • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture Fjbemb U T Rj Hacypepg • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. Fpjb Hasmcaawscypeg • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system Fsbjmb U T Uj Hacypopg • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales