Used Schaffer 5050 Z for sale (11,416)

Condition: good (used), Year of construction: 2011, x-path 1200 mm y-path 650 mm z-travel 520 mm Travel rotary-swivel range in X 500 mm Fixed machine table travel range in X 570 mm A-axis +90 / -110 ° C-axis 360 ° Dslipiastvgh Rsneut Spindle holder SK 40 Speed 30-8000 rpm Swivel rotary table dimensions 520x420 mm Interfering edge diameter 610 mm Fixed table dimensions 700x600 mm Drive power 22 kW Dimensions 3600x2650x2800 mm Machine weight approx. 8500 kg Equipment: - 5-axis machining center Hedelius - CNC control Heidenhain iTNC 530 - NC rotary swivel table on the right - Fixed table on the left - 30-fold tool changer - Electric handwheel - IKZ (20 bar) - chip conveyor

Condition: ready for operation (used), Year of construction: 2008, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 600 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: HSK 63 ; 20 kW; 12000 rpm PALLET: 400x400 mm; N.2 MAX ADMITTED LOAD: 500 Kg TOOL MAGAZINE: 60 POS; CHAIN-TYPE CONTROL UNIT: SIEMENS 840 D WEIGHT: 9700 Kg OVERALL DIMENSIONS: 4931 x 2626 x 2713 mm Delipisv Utu Eeanout ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; PORTABLE HANDWHEEL

Condition: excellent (used), Year of construction: 2014, operating hours: 8,000 h, Functionality: fully functional, CNC controller: HEIDENHAIN TNC640 Axes Dujlipiev Eqqxjanet X-axis travel mm: 1.800 Y-axis travel mm: 1.800 Z-axis travel mm: 1.210 A-axis degrees: -15°+105° Rapid traverse m/min: 40 Worktable Table dimensions mm: ø1.400x1.200 T-Nut: 22H7 / 100 mm Swing clearance mm: ø 1.900 (limited up to 2.200) Max. workpiece weight kg: 5.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 63/73 (100/40% ED) Spindle torque Nm: 300/348 (100/40% ED) Cooling Cooling through the Spindle Center bar: 50 Tool system Tool holder: HSK-A100 Tool magazine slots: 92 Equipment Electronic Handwheel HEIDENHAIN HR410 Chip conveyor High pressure pump Collision monitoring HEIDENHAIN DCM Monitoring between the machine and the tool Direct measuring systems on all axes, HEIDENHAIN Rinsing pistol Automatic opening and closing door Spindle offset sensor Micro Epsilon Paper band filter system Blowing air through the center of the spindle, selected via M-function HEIDENHAIN HR550 FS, electronic handwheel with radio transmission Radio measuring sensor BLUM TC60 BLUM Novotest, laser tool setting and breakage control Oil and emulsion mist separator Machine running times Under power: 17.991 Spindle Working: 8.028

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand OKUMA Model OSP P300MA Main Drive Spindle speed range 15000 Spindle motor power 18.5/26 kW Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 625 mm Workpiece Workpiece X 600 mm Workpiece Y 900 mm Table Table load 400 kg Tools Slots in storage 146 Additional Equipment Cooling through spindle 70 bar Probe Renishaw TS34 tool monitoring Chip conveyor Mayfran Consep 2000II 125HP 70 bar, 20 l/min Twin in-line cartridge filter Air blowing of tools Djlieuz Hq Djpiansut TAS-S: Thermo Active dimension Stabilizer-Spindle TAS-C: Thermo Active dimension Stabilizer-Construction Servo Navi M OSP-P300M 3D kit & OSP suite This 4-axis Okuma MB-4000H horizontal machining center was manufactured in 2018. It features a 400 mm x 400 mm pallet, a spindle speed of 15,000 rpm, and a spindle power of 18.5/26 kW. The machine includes a high-capacity tool magazine with 146 Matrix positions and advanced TAS-S and TAS-C for dimensional stability. If you are looking to get high-quality milling capabilities, consider the Okuma MB-4000H machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Wire EDM Machine - AGIE CHARMILLES - Robofil 2050 TW Wire - - RS232 / USB / RJ45 / PCMCIA interfaces - Electronic control levers - Bdb7yale - Automatic threading and rethreading (on both wires) - Maximum workpiece dimensions: 1000 x 490 x 260 mm - Maximum weight: 500 kg - X x Y x Z travel: 320 x 220 x 160 mm - U, V axis travel: +/- 48 mm - Maximum clearance angle: +/- 30° - Table dimensions: 600 x 430 mm Dujlipiowh Skdsanet - Wire diameter: 0.05 - 0.33 mm - Machine dimensions: 2320 x 2310 x h. 2320 mm - Weight: 3,000 kg

Condition: used, - Edition Partnership - With our TF 100 2.0 "Partnership Edition" we offer CNC technology for the highest demands. And at a sensational price. Drilling, grooving, milling Unique in operation and in the "Partnership Edition" even more so in terms of features: The TF 100 2.0, specially developed for furniture and interior TF 100 2.0, specially developed for furniture and interior than 5 m² production area, it can perform drilling Delju Tiwvsipianout 5 levels of the workpiece, groove sawing work and also milling work. The machine impresses with its extremely high processing speed with maximum precision and ease of operation. The standard pre-equipment for angular gears, the optional the optional CLAMEX and lock case milling cutters can be can be retrofitted easily and at any time. The TF 100 2.0 "Partnership Edition" is completely manufactured in in our large factory in Rimini, the headquarters of Masterwood, and is 100% "Made in Italy". ----- Technical data ----- Max. workpiece length X: unlimited, max. workpiece length Y: 1,000 mm, max. tool thickness Z: 60 mm, Vertical spindles X - direction: 5 pieces, Vertical spindles Y - direction: 5 pieces, Horizontal double drilling spindles X - direction: 2 + 2 pieces, Horizontal double drilling spindles Y - direction: 1 + 1 piece, Units: 16 drill head, Drilling spindle speed: 4,000 rpm, Distance between drilling spindles: 32 mm, Motor power: 1.7 kW, Grooving saw: X - direction, Saw blade Ø: 125 mm, Extraction connection Ø: 150 mm, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg

Condition: excellent (used), Year of construction: 2020, Wittmann Robot W173-0109 X-axis: 2000 mm Y-axis: 2600 mm Z-axis: 3500 mm Duelipswic R Rjianet Year of manufacture: 2020 Payload: 40 kg Weight: 1380 kg Robot has servo-driven A- and C-axis. 4 vacuum circuits including blow-out function and 4 gripper on/off switches.

Year of construction: 2012, Condition: excellent (used), Functionality: fully functional, Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles Travel path X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of tenths. This eliminates the need for angle heads for lateral machining and fully utilizes the performance range of the spindle motor. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders). HSK-63F tool holder. Minimum-quantity spray device for 2 different fluids. USB ports. RJ45 network card for network connection. 3D software. Camplus software. Shape software for free programming and lettering. Duolijwiixuepianst Handheld control unit with display including speed control. Pneumatic reference stop on the left and right sides for multiple assignments. Tunnel on the left and right sides for extra-long profiles. - Delivery/commissioning/training and connection to software or calculation programs by us. ("all-round worry-free" complete package) available for an additional charge.

Condition: excellent (used), Functionality: fully functional, Hermle UWF 802M universal milling machine with Heidenhain TNC124 linear control in excellent condition! Technical specifications: >> Year of manufacture approx. 1995 Machine no. 9804 >> Fixed angle table >> Speed: 17 to 3550 rpm Dslipswfq Hfsianeut >> Continuous feed in 3 axes from 0 to 1600 mm/min >> Drive power: 6 kW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and equipment: >> Heidenhain TNC124 linear motion control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Operating instructions About the machine: Offered is a Hermle UWF 802M tool milling machine with Heidenhain TNC 124 path control. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No extensive CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Hermle on site with power on.

Condition: ready for operation (used), Year of construction: 1996, Control Unit Brand FANUC Model Series 0-M Main Drive Spindle speed range 8000 RPM Tool taper SK 40 Movement X-Axis Movement 762 Y-Axis Movement 510 Z-Axis Movement 560 This 3-axis Cincinnati Sabre vertical machining center was manufactured in 1996. If you are looking to get high-quality milling capabilities, consider the Cincinnati Sabre machine we have for sale. Contact us for more information. Duolipiaswh A Rzenet Application Types Milling

Condition: used, Year of construction: 2016, Functionality: fully functional, track width: 4,000 mm, working range: 3,000 mm, working width: 3,000 mm, total width: 4,960 mm, total length: 8,400 mm, table length: 6,600 mm, working length: 6,000 mm, table width: 3,200 mm, material thickness: 80 mm, year of last overhaul: 2024, sheet thickness steel (max.): 80 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,000 mm, worktable width: 3,000 mm, height adjustment type: electric, exhaust gas cleaning: Kemper PlasmaFil Compact, Equipment: documentation/manual, Hello, I am selling a Sato plasma cutting system with a Kjellberg Smart Focus cutting source including a Kemper filter. The system is fully functional and can be tested on-site. Dismantling should be carried out by the buyer. Cranes in the hall are available for use. Sato plasma system including 3x6m cutting table Plasma system is equipped with a laser pointer for sheet metal setup (sheet metal position determination and sheet metal position compensation) 8m heavy-duty machine track with HEB300 and milled S49 rails High-precision linear guide with servo motor and integrated CAN bus controller as a controlled Z-axis Stroke 215mm Speed 70mm/sec Feed speed 12,000mm-20,000mm/min Kjellberg Smart Focus 300 plasma power source with PerCut4000 quick-change head Many spare parts/wear parts are still available and can be sold optionally. Automatic gas control with Kjellberg PGV-300 Macro programming on the plasma 96 macros 8m chain chute for energy chain The filter system was replaced with a Kemper system in 2019. KEMPER PlasmaFil Compact - Weatherproof version - Frequency converter Type 31 0650 Extraction capacity 4,500-6,500 m³/h Negative pressure 1,900-2,500 Pa Filter area 100 m² Motor power 7.5 kW Voltage 3 x 400 V 50 Hz Dujlipowh Rtkoianjt Dimensions 1830 x 1830 x 3800 mm

Condition: excellent (used), Machining center HOLZHER Dynestic 7521 -used- Nesting table, pusher with suction device, unloading unit with conveyor belt, hardened, dust-protected prismatic guides, 2-sided guided portal design, helical rack and pinion drive (X- and Y-axis), Network card for remote maintenance, Control cabinet cooling with heat exchanger, manual control unit, Swivel saw unit, Plate tool changer on the move, incl. step mats, laser, Automatic central lubrication, New industrial PC, incl. nesting software with free-form boxes ----- Technical data ----- Djlju R Tcrsipianeut Processing length X: 4,600 mm, Processing length Y: 2,100 mm, max. traversing speed X: 80 m/min, max. traversing speed Y: 100 m/min, max. traversing speed Z: 25 m/min, Machine control software: CAMPUS HOPS, Motor power main spindle: 7.5 kW, Main spindle speed: 1,000 to 24,000 rpm, Main spindle holder: HSK 63F, Spindle cooling: liquid, Motor power drilling unit: 3.0 kW, Mounting of drilling spindles: M10, fit 11 mm, Number of vertical drilling spindles: 18 pcs, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Vacuum pump output: 500 m³/h, Suction connection Ø: 250 / 200 + 2x 80 mm, Compressed air connection: 6-8 bar, Compressed air requirement: 300 l/min. Quality info: - Complete basic cleaning - Electrics checked - Pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0040000963C, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 14 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 550 mm, tool mount: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 192 Nm, bar passage: 52 mm, total height: 1,850 mm, total length: 4,100 mm, total width: 2,600 mm, overall weight: 4,500 kg, controller manufacturer: Siemens, controller model: SINUMERIK 840D, distance between centers: 700 mm, operating hours of spindle: 6,230 h, Equipment: documentation/manual, rotational speed infinitely variable, Equipment highlights: - 12 driven tool stations - Counter spindle - Permanently integrated Y-axis - VDI30 tool holder - Tool package with rigid holders - Chip conveyor included - Control system: Siemens SINUMERIK 840D - Machine hours: 10,270 h - Spindle hours: 6,230 h Please note: The supplied chuck and tool holders do not correspond to the components currently installed or clamped on the machine. Technical Specifications: General: - Year of manufacture: 2014 - Max. connected load: 30 kVA Dolipjwdyh Njianjut - Mains voltage: 400 V, 50/60 Hz - Control voltage: 24 V - CE-certified Machining range: - Max. turning diameter: 500 mm - Max. turning diameter in the slide area: 290 mm - Max. turning length: 500 mm - Distance between centers: 700 mm Travel paths: - X-axis: 210 mm - Y-axis: ±40 mm - Z1-axis: 525 mm - Z3-axis: 550 mm Main spindle: - Max. speed: 6000 rpm - Power: 13 / 14 kW - Torque: up to 192 Nm - Spindle bore: 52 (67) mm - Spindle nose: FL 140h5 Counter spindle: - Maximum speed: 6000 rpm - Power: 12.6 / 16.2 kW - Spindle bore: 44.5 mm - Spindle nose: FL 140h5 - Spindle nose spacing: 780 mm - Max. workpiece weight (counter spindle): 80 kg Turret & Tools: - Tool holder: VDI30 - 12 tool positions (all driven) Driven tools: - Speed: 5000 rpm - Power: 4.18 kW - Torque: 20 Nm - Tool change time: 0.4 / 0.7 s Travel speeds & accuracy: - Rapid traverse X/Y/Z: 30 / 22.5 / 30 m/min - Resolution XYZ: 0.001 mm - Ball screws: 32x10 mm - Accuracy according to VDI/DGQ 3441: - X/Y/Z: 10 µm (new machine) - Z3: 16 µm (new machine) - Repeatability: 3 µm (new machine) Dimensions: - Transport dimensions (without chip conveyor): 3330 x 1946 x 1829 mm - Overall dimensions (including chip conveyor): 4066 x 2583 x 1829 mm

Year of construction: 2009, operating hours: 200 h, Condition: like new (used), Functionality: fully functional, !!! Machining center in mint condition with only 200 hours!!! Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles. Travel path: Duslipjwiiq Rsianst X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of one-tenth. This eliminates the need for angle heads for lateral machining, and the spindle motor's performance range is fully utilized. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders). HSK-63F tool holder. Minimum-quantity spray device for 2 different fluids. USB ports. RJ45 network card for network connection. 3D software. Camplus software. Shape software for free programming and lettering. Handheld control unit with display including speed control. Pneumatic reference stop on the left and right sides for multiple assignments. Tunnel on the right for extra-long profiles. - Delivery/commissioning/training and connection to software or calculation programs by us. ("all-round worry-free" complete package) available for an additional charge.

Condition: used, Year of construction: 2005, Functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Doliowftdmopianjut Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,547 h, Main Drive Spindle speed range 4000 Tool taper HSK-63 Number of axis 7 Movement X-Axis Movement 615 mm Y-Axis Movement 250 mm Z-Axis Movement 1585 mm V-Axis Movement 230 mm W-Axis Movement 1539 mm 1-AXIS Movement 30-210 Tools Slots in storage 72 Duslipjwgf Akjianet Media Chip conveyor Yes Additional Equipment Mist filter unit High pressure cooling (14 bar) Work space rinse cleaning (2.7 bar/60 l) RMP600-Radio/Radio probe Preparation for 70 bar cooling through spindle Programmable overload detector C-axis on second spindle MO321 - Gear milling without tool TE810 - Preparation for Multi and Flash tools NO117 - Tool edge control for 5-axis continuous / Axes movements: X / Y / Z / X2 / Z2 615 / 250 / 1585 / 230 / 1388 mm / W 1539 mm / C-axis indexing 0.0001° This 7-axis Mazak Integrex i-300ST-1500U lathe was manufactured in 2012. It features a main spindle bar passage of 80mm, a tool changer with a capacity of 72 tools, and a milling spindle speed of 12,000 rpm. Additional highlights include a high-pressure cooling system at 14 bar, a chip conveyor, and a mist filter unit. Ideal for prototype production, the machine includes tooling, chucks, and jaws. For more information about this lathe, please reach out to us. Application Types Turning

Condition: used, _____ Description: Year of manuf. : 2017 Control : Sonstige Exeron MF 30 Movement X/Y/Z : 2000/1180/800 mm In General: Year of manufacture:2017 Control system:Exeron MF 30 Traverse paths X/Y/Z:2,000 x 1,180 x 800 mm C-axis:100 rpm, 0.001° Work table:2,500 x 1,350 mm Maximum table load:8,000 kg Work bowl:2,550 x 1,400 Filling height:750 mm Distance table / quill:200 - 1,000 mm Equipment: Dujlipiaswf Dptsnet Measuring system:Direct scales (glass scales) Generator:exoPULSE Mould changer:12 stations Dielectric tank:6,900 l Cartridge filter:6 pieces Rinsing pump:Programmable Cooling unit:10 kW Fire extinguishing system:Kraft & Bauer Set-up mode:Electronic hand-held control unit Accessories:Holder for large electrodes

Condition: excellent (used), Digital 3D edge finder MarTest 802 EW Duoljqff Rmeipianst Working ranges X, Y, Z axis: - 2 to 4 mm iffernschrittwert_mm: 0.005

Condition: new, Year of construction: 2025, Functionality: fully functional, The compact, lightweight conveyor is equipped with a high-speed carbon brush motor. It is easy to install and provides excellent vacuum. Removable, user-friendly controls. All conveyors are equipped with a fabric filter and automatic reverse cleaning. Carbon brushes with automatic shut-off for maintenance alarm. Control is possible via the SPV-U proportional valve controller. 360° mounting possible. All conveyors are equipped with a fabric filter and automatic reverse cleaning with alarm. Djlipsqgdkbsiansut

Condition: used, Year of construction: 2014, operating hours: 4,258 h, Functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 300 mm, Equipment: rotational speed infinitely variable, Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles Travel path X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of tenths. This eliminates the need for angle heads for lateral machining and fully utilizes the performance range of the spindle motor. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders) HSK-63F tool holder Dolipiaewiidqeneut Minimum-quantity spray system for 2 different fluids USB ports RJ45 network card for network connection 3D software Camplus software Shape software for free programming and lettering Handheld control unit with display including speed control Pneumatic reference stop on the left and right sides for multiple assignments Tunnel on the left and right for extra-long profiles The machine is fully encapsulated and also has a hood – an extraction system can be connected here, which we are also happy to offer as an additional option. - Delivery/commissioning/training and connection to software or calculation programs by us ("all-round worry-free" complete package) available for an additional charge

Condition: used, Year of construction: 2015, machine/vehicle number: 917, 5-Axis CNC Gantry Milling Machine HG GRIMME SysTech GmbH G-DT-F 12/10 SB Machine Data Year of Manufacture: 2015 Serial Number: 917 Operating Hours: 12,613 h External Dimensions: 6,382 x 3,568 x 3,180 mm (L x W x H) Workpiece Material: Plastic Workpiece Size: Max. 1,200 x 1,000 x 400 mm (L x W x H) Travel Paths: X = 1,800 mm, Y = 1,600 mm, Z = 815 mm, C = +365°/-95°, A = +/-181° Electrical Data Voltage: 230/400 V Power: 24.5 kW Frequency: 50 Hz Duolipewfid Njianst Milling spindle Manufacturer: Jäger Type: Z80-K530.04 Tool holder: WK25 Power: 4.6 kW Speed: max. 30,000 Balancing: Quality level Q < 0.4 Control system Manufacturer: SIEMENS Type: SINUMERIK 840D sl Operator panel: OP 10 C Note: This is a starting price. The sale will be made via an online auction to the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 850II - X axis mm: X axis: 260 mm - Z axis mm: Z axis: 590 mm - Y axis mm: Y-axis: +/- 50 mm - Max. Turning Diameter mm: Max. Turning Diameter mm: 356 - C axis Increase: 0.001 - Max. Turning Length mm - Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y - Swing over bed mm: Ø - Swing over slide mm: Over cross slide mm: Ø - Bar work capacity mm: Ø 65 (main) / Ø (sub) - Rapid traverse max. m / min X, Z: Rapid traverse max. m / min X,Z - Main Spindle L-SPINDLE 12” - Spindle speed rpm: Spindle speed: 5,000 rpm - Spindle power kW: Spindle power: 18.5 kW - Torque Nm: Torque Nm: - Main Spindle bore Main mm - Main Spindle Nose A2-6 - Sub-Spindle Sub-SPINDLE - Spindle speed rpm: Spindle speed: 6,000 rpm - Spindle power kW: Spindle power: 11 kW Dolewdrfgsipianjut - Torque Nm: Torque Nm: - Main Spindle bore Main mm - Main Spindle Nose A2-5 - Upper Turret Positions: 12 - Number of live tool stations (each turret) / Number of rotating tool stations (each Turret: 12 - Rotating Tool Speed (rpm): 6,000 - Rotary Tool Power: 5.5 EQUIPMENT: - Chip Conveyor - 3-color status lamp - Fixed tool holders - Parts Extractor MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: as good as new (ex-display), Year of construction: 2024, Technical specifications: Delipieiim Ddoanout Working dimensions on the X-Y axis: 2080 x 2800 mm ▪ Working area on the Z axis: 250 mm ▪ Working height on the Z axis: 200 mm ▪ Working speed X-Y: 30 m/min ▪ Tool changer with 10 tool positions ▪ Max. working speed X-Y: 20 m/min ▪ Working speed Z: 15 m/min ▪ Material fixation method: with vacuum ▪ Working areas on the vacuum table: 8 areas x 30 holes each ▪ Vacuum pump capacity 2 x 200 mc/h ▪ Drive motor type: Delta servo motors x 4 ▪ Positioning accuracy +-0.05/300 mm ▪ Motor power: 9 kW ▪ Air-cooled spindle with ceramic bearings ▪ Spindle speeds: 0-24,000rpm ▪ Spindle taper ISO30 ▪ Type of tool holder: ER32 ▪ Voltage: 400V ▪ Weight: approx. 3000kg

Condition: used, Year of construction: 2017, machine/vehicle number: 4445, REICHENBACHER ECO-RS III DUO 5-Axis CNC Machining Center Machine Data Year of Manufacture: 2017 Machine No.: 4445 Duslipswfid Ajianot Operating Hours Spindle 1: 7,685 h Operating Hours Spindle 2: 7,098 h Footprint: X = approx. 5.8 m, Y = approx. 3.6 m, Z = approx. 3 m Machine Weight: approx. 15 t (with control cabinet, without auxiliary units) Rated Power: 7 kW (S1 operation), constant from 12,000 - 40,000 rpm Speed: 1,000 - 40,000 rpm, clockwise/anticlockwise rotation Travels: X = 2,320 mm, Y = 1,980 mm, Z = 860 mm Tool Holder: HSK-40 Tool Length: max. 270 mm from spindle nose Tool diameter: max. 40 mm Saw blade diameter: max. 240 mm Control system Manufacturer: SIEMENS Type: SINUMERIK 840D Solution Line CNC control: NCU 720.3B Note: This is a starting price. The sale will be conducted via an online auction against the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: used, Year of construction: 2016, machine/vehicle number: 4417, REICHENBACHER ECO-RS III DUO 5-Axis CNC Machining Center Dujlipiswfidveanjt Machine Data Year of Manufacture: 2016 Machine No.: 4417 Operating Hours Spindle 1: 10,960 h Operating Hours Spindle 2: 11,454 h Footprint: X = approx. 5.8 m, Y = approx. 3.6 m, Z = approx. 3 m Machine Weight: approx. 15 t (with control cabinet, without auxiliary units) Rated Power: 7 kW (S1 operation), constant from 12,000 - 40,000 rpm Speed: 1,000 - 40,000 rpm, forward/reverse rotation Travels: X = 2,320 mm, Y = 1,980 mm, Z = 860 mm Tool Holder: HSK-40 Tool Length: max. 270 mm from spindle nose Tool diameter: max. 40 mm Saw blade diameter: max. 240 mm Control system Manufacturer: SIEMENS Type: SINUMERIK 840D Solution Line CNC control: NCU 720.3B Note: This is a starting price. The sale will be conducted via an online auction against the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.