Used Schaffer 2024 for sale (2,507)

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Colsvfxw Hjin Hi Djgt Equipment: cutting thickness 40 mm

Condition: used, Year of construction: 1982, Serial number: 21xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19831 Specifications: - 1982 model - Length: 900 cm - Wheelbase: 455/137 cm - Good tires (see pictures) - Ready for delivery Description: 1982 Ohna Maur 260 machine trailer. The trailer has good tires marked with snowflake- Ready for delivery. Technical approved: no Cgoliov U Tf Rsn Hi Dst EU-approved until: 16.02.2024 Own weight: 5250 Total Weight: 26000 Payload: 20750 Width: 250 Length: 900

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 220000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* Cgolswb U Urjin Hi Det 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "33244 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: good (used), Year of construction: 2005, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Last service and calibration 2024 Available immediately. Cgslowgxc Doin Hi Det Delivery within 1-7 days. Machine Data Machine Type: CNC Crysta Apex C776 Manufacturer: Mitutoyo Year of Construction: 2005 Measuring Range: 700 x 700 x 600 mm Controller: UC-200 Hardware & Software CPU: New Monitor: New Software: Latest Mitutoyo MCosmos-1 V3.0 (optional update) Accessories Renishaw PH-10M Renishaw TP200 Renishaw SCR200 Calibration Ball: Ceramic BILZ Vibration Damper System Mitutoyo MRT320 Rotary Table

Condition: like new (used), Year of construction: 2024, load capacity: 16 kg, arm reach: 2,013 mm, ROBOT ARM BRAND: KUKA Cgelin Hijwg D Nvo Dot MODEL: KR 16 R2010-2 TECHNICAL DESCRIPTION PAYLOAD: 16 KG MAX. REACH: 2013 MM MODEL YEAR: 2024 CONTROL UNIT: KRC5 SOFTWARE: KSS 8.7 OPTIONS: KRC 5 dualcab KRC 5 Device Plate I/O BA C5 dualcab AC SPB USB KSI

Condition: like new (used), Year of construction: 2023, operating hours: 4,980 h, Functionality: fully functional, punching force: 165 t, sheet thickness (max.): 6 mm, TruPunch 1000 Large Format (S19) including automated loading and unloading - Brush table - MultiTool function - Thread forming function with thread counter - Marking/fast beading function - Deburring and rolling technology function - Adaptive stroke calibration function - Die spray lubrication - Smart Punch Monitoring - Left part flap - Left part conveyor belt - Left part conveyor belt collecting tray - Part chute sensor - Right part conveyor belt - Additional clamping claw - Individually opening clamp Colin Howg Tp Esi Dsgt - Height-adjustable clamping claw - Automatic clamp closing Loading sensors - DeltaDrive repositioning device - Vibration-damped installation - Chip conveyor with tilting container - Machine status light - Warping detection - Wireless Operation Point SheetMaster Compact (3000x1500) (AK05) loading automation - Loading station with spreader magnet for sheet separation - Suction cup frame - Vacuum sensors - Double sheet detection - Unloading cart for scrap skeletons and microjoint sheets - Compact setup with light grid and HZP - Peeling system SortMaster Compact unloading automation for good parts - Machine-integrated automated small parts removal - Suction cup frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction cup bars (each suction cup can be controlled individually) - Vacuum sensors for the suction cup circuits - Expansion of the unloading area to 1200 x 800 mm - Light grid Without Tools and tool cassettes. Machine is running and can be inspected at any time. Drives ON: 4,980 hours Machine Running: 3,350 hours Last maintenance 06/2024.

Condition: used, Year of construction: 2025, The KMK ZLFM-800SC Automatic Film Laminating Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 260 x 250 mm to a maximum of 780 x 1040 mm. It features a pre-stacked paper mechanism with non-stop paper feeding, a feeding head suction nozzle positioned 1150 mm above the ground, and a laminating unit. The machine comes with a 2-year warranty and includes installation. Additional features include an electrically heated powder removal mechanism, an automatic feeder, and a stacker with the paper output roll positioned 890 mm above the ground. It also includes a cutting unit. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: min. 260 x 250 mm max 780 x 1040 mm Equipment: 6-8 weeks after ordering 2 year guarantee + installation Condition New machine Automatic Feeder Pre-piled paper mechanism, non - stop paper feeding device (cycle paper feeding) Feeder: Suction nozzle of feeder head is 1150 mm from the ground Cjlinsvfx Hhe Hi Djgt Stacker: Paper out roll of the stacker is 890 mm from the ground height Powder removal mechanism electric heating powder removal mechanism Laminating Unit Cutting unit

Condition: used, mileage: 583,000 km, Year of construction: 2012, Serial number: WDB9061351N53xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19840 Specifications: EU approved until: 14.09.2025 Model year: 2012 Mileage: Approx. 583,000 km Automatic transmission Tires: See pictures 750 kg Zepro lift Side door Length: 717 cm Width: 217 cm Wheelbase: 433 cm Curb weight: 2,573 kg Drivetrain: 4x2 Engine power: 163 hp 2 sets of tires Rear view camera Rust: Some rust, shown in pictures Damage: Small damage at the bottom of the front, shown in pictures Radio/CD player Air conditioning/AC Description: Mercedes Sprinter panel van from 2012. The car has had its engine replaced in 2024, and a used engine with approx. 400,000 km has been installed. It is EU-approved and in weekly operation. There is some rust and a small damage at the bottom of the front, which is shown in the pictures. The car can be delivered at short notice. Km: 583000 HK: 163 Technical approved: Yes EU-approved until: 14.09.2025 Own weight: 2573 Total Weight: 3500 Payload: 852 Width: 217 Celin Hev U S A Ioi Degt Length: 717 Euro: 5

Condition: used, first registration: 03/2025, overall weight: 18,000 kg, color: black, axle configuration: 2 axles, maximum load weight: 14,980 kg, empty load weight: 3,020 kg, tire size: 445/45 19,5, wheelbase: 6,260 mm, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2024, tire condition: 100 %, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, Equipment: ABS, truck registration, Vehicle number for inquiries: 68882 Koegel, ZW18 - 19.5 * Year of manufacture: 2024 * ABS, anti-lock braking system Cgolinsu Tbfqs Hi Det * EBS, electronic braking system * Air suspension * Tandem trailer * 7.15 * 7.45 * 7.82 * Spare wheel carrier * 15-pin connector * Lifting and lowering device * Total weight: 18,000 kg * Unladen weight: 3,020 kg * Payload: 14,980 kg * Axle manufacturer: SAF * Tire condition 1st axle: 100% -- 100% - Tire size: 445/45 R19.5 * Tire condition 2nd axle: 100% -- 100% - Tire size: 445/45 R19.5 * Wheelbase: 6260 mm * Koegel ZW 18 - 195 New vehicle, not yet registered * Available immediately * Ride height 1080 mm * Lifting range 1020 - 1410 mm * Coupling height 400 mm * Length-adjustable drawbar * Tires 445/45 R 195 Good Year * Unit price EUR 16,900 net * We will send you a construction description upon request. Subject to errors and prior sale. Additional photos and 360-degree images can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Ask our trained specialists; we will be happy to advise you. Reference no. for inquiries: 68882 Koegel, ZW18 - 19.5 * Year of manufacture: 2024 * ABS, anti-lock braking system * EBS, electronic brake system * Pneumatic suspension * Tandem trailer * 7.15 * 7.45 * 7.82 * Spare tire rack * Connecting plug 15-pin * Lifting & lowering device * Total weight: 18,000 kg * Empty weight: 3,020 kg * Payload: 14,980 kg * Axle manufacturer: SAF% * Tire condition 1. Axles: 100% -- 100% - Tire size: 445/45 R19.5 * Tire condition 2. Axles: 100% -- 100% - Tire size: 445/45 R19.5 * Wheelbase: 6260 mm * Koegel ZW 18 - 195 New vehicle, not yet registered * Available immediately * Ride height 1080 mm * Lifting range 1020 - 1410 mm * Coupling height 400 mm * Length-adjustable drawbar * Tires 445/45 R 195 Good Year * Unit price EUR 16,900 net * We will send you a construction description upon request. Subject to errors and prior sale. You can find more pictures and 360-degree images on our homepage. Our comprehensive service includes, for example: * Purchase/sale/rental of utility vehicles *Quick uncomplicated financing * Applications for all (export) documentation * Ordering export license plate * Vehicle preparation: new tarpaulins, lettering, varnishing etc. * Professional loading / load securing * TüV approvals, approval service * Transfer of utility vehicles Ask our trained staff, we will gladly advise you.

Condition: new, power: 34 kW (46.23 HP), Year of construction: 2024, operating hours: 5 h, Equipment: air conditioning, Weight: 4600 | CLAAS Torion 530 Wheel Loader New machine, built in 2024 Cjlin Hsrfbyqji Dogt Approx. 50 operating hours Technical specifications and equipment: 4-cylinder Yanmar engine with 34 kW / 46 hp Two-stage hydrostatic drive Z-kinematics Hydraulic locking on the tool carrier Mitas 350/70 R18 tires Cabin with heating Air conditioning Radio including hands-free system Steering column, 2-way tilt and height adjustable Driver's seat with fabric upholstery, air suspension, and seat heating Armrest on the left LED work lights, yes, 2 front and rear Vibration damping Slow-speed control, including engine speed memory Approved as a self-propelled work machine (LoF, 20 km/h) | Internal No.: 11113547

Condition: like new (used), Year of construction: 2024, load capacity: 30 kg, arm reach: 2,100 mm, ROBOT ARM BRAND: KUKA MODEL: KR 30 R2100 / SEL TECHNICAL DESCRIPTION PAYLOAD: 30 KG MAX. REACH: 2100 MM MODEL YEAR: 2024 Celin Howg D H Iji Dsgt CONTROL UNIT: KRC5 SOFTWARE: KSS 8.7 OPTIONS: KRC 5 dualcab KRC 5 Device Plate I/O BA C5 dualcab AC SPB USB KSI

Condition: used, axle configuration: 3 axles, wheelbase: 2,700 mm, loading space length: 13,680 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 95 m³, first registration: 06/2021, color: blue, Year of construction: 2021, Equipment: ABS, = Additional options and accessories = - Rear doors = More information = Cjlinowgu Uij Hi Dogt Empty weight: 6.646 kg Carrying capacity: 20.350 kg GVW: 27.000 kg Dimensions (LxBxH): 1386 x 255 x 400 cm Technical inspection expiration date: 2024

Condition: used, Year of construction: 2025, The KMK BY-800F Automatic Foil Stamping & Creasing Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 250 x 340 mm to a maximum of 620 x 800 mm. Key features include an electric control unit, a conveying unit, touch control, a stamping and embossing unit, and a feeding unit. The machine comes with a 1-year warranty and includes installation. Additional components include a delivery unit and a drive and transmission unit. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: min. 250 x 340 mm - max. 620 x 800 mm Equipment: Colin Hiovfxwmo Djgt Condition New machine 6-8 weeks after ordering Feeding Unit 1 year guarantee + installation Conveying Unit Die-cutting and Stamping Unit Driving and Transmission Unit touch-control Delivery unit Electric control unit

Condition: used, mileage: 89,000 km, Year of construction: 2024, Field of application: Freight transport Serial number: WMA3HKZZ0RM93xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19796 Specifications: - Mileage: 92,000 km - Power: 640 hp - Total weight: 33,000 kg - Axle type: 6x4 - Front suspension type: Air suspension - Rear suspension type: Air suspension - Differential lock - Auxiliary light - Refrigerator - Power take-off (PTO) - Cabin heater - Navigation system - Spoiler set - Swivel plate - Fifth wheel Description: We are selling a MAN TGX 33.640 tractor unit from 2024 with a 640 hp engine and a wide range of features. The vehicle is equipped with both tipping and walking floor hydraulics, as well as a tandem axle for increased stability and capacity. It has 2 bunks and is perfect for long haul trips. The truck is in daily use, so the mileage will increase over time. Km: 89000 Cgjlinev U Saao Hi Djt HK: 640 Technical approved: Yes EU-approved until: 07.01.2026 Own weight: 10500 Total Weight: 33000 Payload: 22500 Width: 255 Length: 709,5 Euro: 6

Condition: excellent (used), color: other, Year of construction: 2024, Year of manufacture: 2024 Attachment suited for: Construction machines Quick coupler system: Yes Technical condition: very good Visual appearance: very good Damages: none Price: On request Eurosteel dichte bak, ongebruikt. Snelwissel aansluiting, geschikt voor L110/L120 Coljua U U Soin Hi Dsgt

Condition: used, mileage: 323,500 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2014, emission class: euro5, color: red, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MB 516 Sprinter * VDL body * Mid-City * Labeling - FOIL - the vehicle is completely covered in foil * Class M3 * Water pump and V-belt / roller new in 02/2024 * Automatic * TELMA / R E T A R D E R * Driver's seat climate * Passenger compartment - AIR CONDITIONING * Auxiliary heater / parking heater * Convector heater * Seats: 15 * Standing places: 12 * Vehicle drives approx. 99 km/h * Standing places * Mechanical folding ramp * Inspection book available * L: 7,361 m * Vehicle has slight damage to the body - see pictures * More photos available if required * Front tires good. Cgolijnp Dhuen Hi Det * etc. * All information without guarantee * We reserve the right to sell the vehicle prior to sale * Please refer to our terms and conditions

Condition: used, mileage: 344,988 km, power: 134 kW (182.19 HP), first registration: 04/2004, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 3,250 mm, gearing type: mechanical, emission class: euro3, loading space width: 2,320 mm, loading space length: 4,200 mm, loading space height: 400 mm, Year of construction: 2004, Equipment: ABS, onboard computer, trailer coupling, = Additional options and accessories = - Air seats - Autoradio - CD - Electrically operated mirrors - Mirror heater - Powered windows - Seat heater - Sunroof - Sun visor - Tachograph - Twin wheels = More information = Engine capacity: 5.880 cc Empty weight: 4.950 kg Carrying capacity: 2.540 kg GVW: 7.490 kg Dimensions (LxBxH): 610 x 245 x 265 cm Make of bodywork: Meiller Technical inspection expiration date: 2024 Cgslin Hewgu R Rei Dot

Condition: used, Year of construction: 2025, The KMK 1500-BMY Semi-Automatic Die Cutting & Creasing Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 550 x 550 mm to a maximum of 1510 x 1100 mm. With a maximum die-cutting speed of 4500 sheets per hour, it operates in a flat-to-flat die-cutting style. The machine has a main motor power of 11 kW and a total power of 17 kW, with a maximum die-cutting pressure of 350 tons. It can handle paper and board thicknesses ranging from 1 to 9 mm. The machine's dimensions are 6300 x 4500 x 2500 mm, and it has a maximum stack height of 1400 mm and a maximum delivery stack height of 1200 mm. Weighing 17.8 tons, this machine comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: 550 x 550 mm 1510 x 1100 mm Equipment: 6-8 weeks after ordering 2 year guarantee + installation Condition New machine Die cutting style: Flat to flat Max. paper size: 1510 x 1100 mm Min. paper size: 550 x 550 mm Max. Die-cutting size: 1500 x 1100 mm Max. Die-cutting pressure: 350 T Paper processed cardboard: 1-9 mm Max. Die-cutting speed: 4500 sheets/h Max. feeding pile height: 1400 mm Max. delivery pile height: 1200 mm Main motor power: 11 kW Cslievfxrwsn Hi Dsgt Total power: 17 kW Weight: 17.8 T Dimensions: 6300 x 4500 x 2500 mm

Condition: used, Year of construction: 2009, Serial number: YY9PV24TX9P01xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19490 Specifications: - 3 axles - Lift on 1 and 3 - Air suspension - Hydraulic hood - Tires (see pictures) - Ready for delivery Cjlsvyff Toin Hi Djgt Technical approved: no EU-approved until: 07.04.2024 Own weight: 5830 Total Weight: 25500 Payload: 19670 Width: 255 Length: 945

Condition: used, mileage: 95,260 km, power: 140 kW (190.35 HP), first registration: 07/2020, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 4,420 mm, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,100 mm, loading space height: 2,420 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, sleeping cabin, tail-lift, traction control, trailer coupling, = Additional options and accessories = - 1 fuel tank - Airbag - Air seats - Alarm system - Autoradio - CD - Central lock - Electrically operated mirrors - Engine brake - ESP - Fog lights - Heater - Mirror heater - Mp-3 - Powered windows Cgelin Hjwgu Ntji Dst - Spare wheel - Spare wheel holder - Speed-limiting device - Sunroof - Sun visor - Tachograph - Tachometer - Tool box - Twin wheels = More information = Technical information Engine capacity: 4.580 cc Measures Dimensions (LxBxH): 860 x 255 x 355 cm Weights Empty weight: 5.655 kg Carrying capacity: 1.835 kg GVW: 7.490 kg Functional Tail lift: 1000 kg Layout Number of berths: 1 Other information Technical inspection expiration date: 2024 Heater: Webasto Power steering: hydraulic Tail lift: DHOLLANDIA DHLMQ.10

Condition: used, Year of construction: 2025, The KMK 106-MTF Automatic Foil Stamping and Die Cutting Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 450 x 370 mm to a maximum of 1060 x 770 mm. Weighing 17,000 kg, the machine features three longitudinal and two transverse foil pull shafts, with a maximum sheet size of 1060 x 770 mm and a minimum sheet size of 450 x 370 mm. The overall dimensions of the machine are 6050 x 4200 x 2260 mm, and it supports a maximum die-cutting size of 1050 x 750 mm. The machine has a gripper margin of 8-17 mm and a maximum stack height of 1350 mm. It includes 12 individually heatable zones, each adjustable up to 200????C, and a main motor power of 11 kW. The maximum embossing size is 1050 x 750 mm, with a maximum stack height of 1200 mm and a maximum longitudinal foil diameter of 250 mm. The machine comes with a 2-year warranty and includes installation. Additional features include an air requirement of 0.6 MPa and a flow rate of over 0.37 m????/min, a maximum mechanical speed of 7500 sheets per hour, and a maximum cutting force of 300 tons. It can handle paper weights ranging from 90 to 2000 g/m???? for cardboard, 0.1 to 2 mm for cardboard, and up to 4 mm for corrugated board. The delivery terms are FCA, with an estimated delivery time of 8-12 weeks after ordering. The maximum embossing speed is 6500 sheets per hour. Format: 1060 x 770 mm 450 x 370 mm Equipment: 8-12 weeks after ordering 2 year guarantee + installation Condition New machine Max. sheet size: 1060x770mm Min. sheet size: 450x370mm cutting size: 1050x750mm mping size : 1050x750mm Gripper margin: 8-17mm Paper range: 90-2000g/m2(cardboard) 0.1-2mm(cardboard) =4mm(corrugated) Cgslin Hiovfxvpe Dst Maximum cutting force: 300 T Max. mechanical speed: 7500 s/h mping speed: 6500 s/h Foil pulling shafts,longitudinal 3,transversal 2 Zones individually heated: 12 heating zones ( each zone can be adjusted independently, max 200 Max. foil longitudinal diameter: 250mm ivery pile height: 1200mm ding pile height : 1350mm Main motor power: 11 kW Machine power: 46kw Machine weight: 17000kg Air requirements: 0.6Mpa, >0.37m3/min Overall machine dimensions: 6050x4200x2260mm

Condition: used, Year of construction: 2025, The KMK HBJ-D1200 Paper Board Erecting Forming Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine is designed to handle a variety of materials including 200-600 g/m???? cardboard, PE-coated paper, kraft paper, and corrugated board. It can produce lengths ranging from 100 to 450 mm with angles between 5???? and 40????, and widths from 100 to 400 mm. The machine has a production capacity of 80 to 320 pieces per minute and a total power of 6.5 kW. Its overall dimensions are 3600 x 1800 x 1700 mm, with a total weight of 2.4 tons. The machine can handle heights ranging from 15 to 200 mm. It comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: Equipment: Delivery 6-8 weeks after ordering Condition New machine 2 year guarantee + installation Production capacity: 80-320 pcs/min Suitable Material: 200-600g/m2 card paper, PE coated paper, kraft paper, corrugated paper Cgolin Hjvfxyhsi Dst Length: 100-450 mm, degree: 5??- 40?? Width: 100-400 mm Height: 15-200 mm Total Power: 6.5 kW Total Weight: 2.4T Overall Dimension: 3600 x 1800 x 1700 mm

Condition: used, Year of construction: 2025, The KMK WJ-1800 Corrugated Cardboard Making Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles a format of 1800 mm and is part of the high-speed KMK WJ series, capable of producing 2, 3, 5, or 7 layers of corrugated cardboard. Key features include a double-layer NC separating machine, a full-servo cutting and creasing machine, and a hydraulic roll stand. The machine comes with a 2-year warranty and includes installation. It also supports 280/320 single-sided configurations. The delivery terms are FCA, with an estimated delivery time of 8-12 weeks after ordering. Format: 1800 mm Equipment: 8-12 weeks after ordering 2 year guarantee + installation Condition New machine KMK WJ Series High Speed 2/3/5/7 Layer Corrugation Line Full servo slitter scorer machine Double layer NC cut off machine Hydraulic mill roll stand Cgelin Hsvfxy Ioi Djt 280/320 Single facer

Condition: used, Year of construction: 2025, The KMK CM-1500A (2R) Roll to Sheet machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles a format of 450 x 1650 mm. It comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: 450 x 1650 mm Cgelin Hjvfxt Isi Det Equipment: 2 year guarantee + installation Condition New machine 6-8 weeks after ordering

Condition: used, Year of construction: 2025, The KMK ZLFM-1080SC Automatic Laminating Machine with powder cleaning, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 320 x 290 mm to a maximum of 1080 x 880 mm. Key features include optional add-ons such as a chain knife cutting system and a UV enhancement unit. The machine is equipped with a front-layer mechanism to prevent curling of thin paper and includes a sheet drawing function. It also features a non-stop feeder and stacker, ensuring continuous operation. Additional highlights include a tool temperature controller and optional double lamination and embossing units. The machine comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: min. 320 x 290mm max. 1080 x 880mm Equipment: 6-8 weeks after ordering 2 year guarantee + installation Condition New machine Non-Stop Feeder Non-stop Stacker Mold temperature controller Thin paper anti curling Front lay Sheets drawing Cgolin Hiovfx Dte Det Optional = Chain knife cutting system Optional = Double lamination, Embossing unit Optional = UV enhancement unit