Used Schaffer 980 T for sale (13,977)

Condition: refurbished (used), Diosna W 240 AFT wendel mixer with 2 bowls 240kg dough 2 speed frequency controlled original Diosna digital control panel temperature measurement scraper shorter kneading time fast dough sequence lower dough heating suitable for all types of dough, thanks to the gentle kneading Dsdpowhwrmsfx Aduocr capacity in flour 150kg bowl contents 370 liter

Year of construction: 2001, condition: like new (used), Roller coater Brand:Sorbini Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Dsdofw Nc Ujpfx Aduscr Techn info: Working width max 1300mm Thickness of workpiece 0-80mm Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Roland 305 +L+V+T Year: 1997 Djdowtz Uispfx Aduecr 120 million 5-0 / 1-4 Accessories included: Double sheet electronic control Suction air table Antistatic system PPL semi-automated plate changing RCI central control desk, remote-controlled circumferential adjustment Rolandmatic dampening with refrigeration recirculation for dampening prepared for Ink Temperature Control Coating unit IR dryer Powder spray Steel plate in delivery High pile delivery Sheet de-curler

Condition: used, functionality: fully functional, machine/vehicle number: 515065J00295, Year of construction: 2018, operating hours: 4,762 h, load capacity: 1,500 kg, lifting height: 4,650 mm, free lift: 1,530 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, fork length: 1,150 mm, empty load weight: 2,700 kg, drive type: Elektro, Electric 3-wheel forklift truck Dsdpfx Aouhxu Ssduocr Fahrgestellnummer: 515065J00295 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery year of construction: 2014 Description: Still RX50-15 No.: R0058 Year of construction: 2018 Operating hours: 4762 The device is visually in good and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other devices on site. Sideshift, 3rd valve,

Year of construction: 2024, condition: new, functionality: fully functional, Convection baking oven Powder furnace new SLS - 90 / O * D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Homogeneity < ± 3 ° C, if 180 ° C Max < ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Dodpfx Aocutrljduecr Motor 1,1 kW 6480 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Delivery time approximately 12 to 16 weeks after ordering Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta, Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine Powder coating plant Powder coating plant Powder coating cabin for powder coating Surface technology Powder gun Powder guns Einbren

Condition: used, Year of construction: 2014, operating hours: 2,245 h, * Driver's suspension seat * Radio Dsdsq Amqijpfx Aduscr ----Construction: ROPS driver's cabin with cabin heating, Kubota 4 cylinder diesel engine type V1505-E2-BH-9EU, 1,498 cc, 18.2 KW, dozer blade 1,400 mm, chain width 300 mm. Mechanical quick-change system, 2 additional hydraulic connections, digging depth: approx. 2,870 mm, dumping height approx. 3,300 mm. Hydraulic trench cleaning bucket 1,150 mm Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: new, power: 360 kW (489.46 HP), overall weight: 41,000 kg, fuel type: diesel, color: black, axle configuration: 8x4, wheelbase: 5,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Kz. Haus, 1x air seat, heated seats, rear window, electric mirror, heated mirror, left electric window, right electric window, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, automatic transmission, differential lock, fog lights, work lights, leaf spring suspension, air and light connections for tow bar, aluminum tank, 2-axle, front-steered, hydraulic cross-lock, roof hatch, crane behind the house, foldable, green environmental sticker Wheelbase: 5600 mm Body: 26t Hiab Multilift Ultima 26S59 roll-off system for containers from 5.25m to 6.75m with radio control and crane as required, frame length approx. 8350mm! With used or new crane 15-35m/t, 10-20m. The price depends on the condition and size of the crane! Available with a trailer hitch for an additional charge of EUR 900! Djdpfx Adov Sdkrouocr Delivery approximately 14 days after ordering! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! - .

Condition: reconditioned (used), functionality: fully functional, Spiralmixer Diosna SP 240 AD with 3 bowls - 2 timers, 2 speed, - 240kg dough, Dodpfswyghzjx Aduecr - after recondition - 3 steinless steel bowls

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm workpiece height:210 mm Djdpfxscxxlrj Adujcr spindle speed max.:2800 U/min distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: ready for operation (used), working width 1300mm rotor with 4 brushes edge brush additional outfeed brush variable regulated feeder variable regulated rotor speed variable regulated brushes speed Dcjdjtzllrjpfx Aduor electric regulation of rotor connection 380v

Condition: used, empty load weight: 7,540 kg, maximum load weight: 14,460 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2001, loading space length: 10,450 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, aluminum rims, 1-axle, BPW axles, air suspension, forced steering, lashing eyes, supports, crane behind house, emergency stop, foldable, 2-point support hydr., 3xhydr. extensions, 1xmech. extension Superstructure: Crane Ferrari 7m/t, Honda GX 630 separate engine for crane hydraulics, crane, 2,66m=2,35t, 11,29m=0,47t crane: 2.66m=2.35t, 4.19m=1.545t, 5.89m=1.015t, 7.69m=0.73t, 9.49m=05.7t, 11.29m=0.47t, (mechanically possible at extra charge 13.25m=0.34t), drum brakes, center and corner stanchions can be folded down, 2.000 crane hours, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Dcjdpji Rq I Njfx Adujr

Condition: used, mileage: 1,001 km, first registration: 01/2003, color: green, driver cabin: other, gearing type: other, Year of construction: 2003, Vehicle location: Bovenden, container locking, rear support Body: 16t telescopic skip Meiller type AK 16.T Dismantling from Daimler-Benz Actros 2646 6x4 Wheelbase: 3300mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Dcodpsi Rlzkefx Aduor

Condition: used, empty load weight: 3,980 kg, maximum load weight: 14,020 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1980, suspension: steel, tire size: 10.00-20, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Belgium 1, 2-axles, leaf spring suspension, twin tires Dodpfx Adji Rndpsuscr Construction: DESOT roll-off container trailer up to 00mm Data without guarantee as it is in transit! Location: Ronny Schoutteet, Brugsesteenweg 213, B-8460 Oudenburg Belgium, Tel. no.: ! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Dcjdpfxsx Af S Us Adujr Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Dsdpfx Adjx A Hfvouocr Max feed speed: 40 m/min

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Dedorualpspfx Adujcr Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding Dcedpfx Adox D Nc Houor

Condition: good (used), mileage: 99,568 km, power: 390 kW (530.25 HP), first registration: 11/2022, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, traction control, = Additional Options and Equipment = - 2nd diesel tank - Digital tachograph - Electric mirrors - Tachograph (control unit) - Fixed coupling - High roof = Notes = Number of axles: 2, Configuration: 4x2, Payload: 11,179 kg, Unladen weight: 8,321 kg, Gross weight: 19,500 kg, Total tank capacity: 1,100 liters, 2nd diesel tank, Fifth wheel height: 114 cm, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cabin type: High roof, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 390 kW (523 hp), Fuel: Diesel, Euro: 6, Transmission type: Optidriver, Gearbox: Volvo, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 2, Seat layout: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: VOL, 12-speed, automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steerable; Tire tread left: 2 mm; Tire tread right: 2 mm; Suspension: Leaf spring Axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread left inner: 1 mm; Tire tread left outer: 3 mm; Tire tread right inner: 1 mm; Tire tread right outer: 2 mm; Suspension: Air suspension Weights Unladen weight: 8,321 kg Payload: 11,179 kg gross vehicle weight: 19,500 kg Interior Number of seats: 2 Condition Technical condition: good Visual condition: good Dcodpfxsx Dibpo Aduor Damages: none Number of keys: 2 Financial Information Leasing price: €980 per month (default, 72 months); Please inquire for more information and conditions Identification Registration number: 21-BTN-4 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our selection covers all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive pricing • Honest trading • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'Recognizable Quality' • And more.... Please visit our website for special offers and our full stock list. Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned Dsdsx Dnb Ujpfx Aduscr • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2018, operating hours: 1,527 h, 2018 | Teupen Leo 36 T (36m) | Used Spider Boom Lift | 1527 hours 📍Location: France, Beauchamp 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 78100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 46 inspection points 45 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine was in good working order during inspection. Works on diesel or plugged in electric. . 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39281 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Djdpfx Adsx Dx Rysuecr

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Dodpfx Adjxmgybjujcr Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: good (used), axle configuration: 3 axles, first registration: 06/2003, loading space volume: 35 m³, suspension: air, color: silver, Year of construction: 2003, Equipment: ABS, Axle configuration Make axles: Mercedes-Benz Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 7.500 kg Carrying capacity: 31.500 kg GVW: 39.000 kg Dsdpfx Adjx Dbgdjuscr Functional Number of compartments: 3 Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: new, Siemens 6FC5403-0AA10-0AA1 Handheld Terminal SN T-C21066923 Version A with HT6 system software 6FC5453-6AX10-4AG3, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Dcodpfx Adex Dxcpousr

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Dsdpfxjxn Nfvs Adujcr Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: new, Siemens 6SL3120-1TE21-0AD0 Single Motor Module SN T-R36180162, unused, in sealed original packaging, 100% functional, delivery as per photos. Dsdjx Dxg Iepfx Aduscr