Used Schaffer 9610 T for sale (12,436)

Condition: good (used), Dimension: Width: approx. 2.900 mm Height: approx. 1,038 mm Depth: approx. 1.100 mm Technical data of the workbench frame: Manufacturer: Jung Heinrich Type: T Included in delivery are: 02x workbench stand, used material color: blue stand height: 1.000 mm stand depth: 1.100 mm stand profile: 100 x 65 mm incl. cross and diagonal braces, foot plates Iedpfelnfi Rox Af Seik The stands are pre-assembled ( welded truss ) 02x workbench crossbars, used Material color: yellow box profile: 120 x 50 mm type of truss: HN 120|25 clear width: 2.700 mm 04x safety pins, used execution: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.900 mm Depth chipboard: 1.100 mm Chipboard in two parts if necessary 08x drilling screws, new Finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Code: 0242 Brand: MVM - ITALY Model: T 1500 - CE Standard Professional wood turning lathe with copying device for wood, plaster, composite materials and various - CE Standard Technical data: Single-phase motor 220 Volt - Kw 2,5 Copying device: the copying device is a unit mounted on the rear bench. It can reproduce weather with wooden samples or with metallic templates thanks to its modern view. It is a practical and manageable tool, it permits large time saving, in batch production or mass production, too. The feed is given by a confortable wheel rotation, the wheel is mounted on the machine fore side Distance between centres mm 1500 Height of centre mm 220 Tool support Spindle revolutions 4 speeds Spindle cone n° 2 Counter centre n° 3 Iisdpfx Ajxykwksf Sek Overall dimensions mm 2350 x 650 x 1200 h Weight kg 325

Condition: excellent (used), Overall dimensions: 3700 x 1070 x 1700 mm Disc coil inner diameter: 460 - 600 mm Maximum sheet roll width: 1000 mm Iiodepvia Eepfx Af Sjk Direction of rotation: Bidirectional Hydraulic operation: - rotation - transverse movement on the chassis - shaft grip Pneumatic operation: - brake

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Frequency-controlled feed belt This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. Iedpexcuviefx Af Seik As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) - data export to QS-Stat (dfq file) - dominant waveness Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Iisdjxgqlhjpfx Af Sok Granite precision guides Weight 95kg

Condition: new, Year of construction: 2025, functionality: fully functional, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg Iijdpex Dhb Iefx Af Sek PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: T Technical Data for Installation: Number of Racking Rows: 01 pc Length per Row: 25,300 mm Number of Bays per Row: 09 pcs Number of Levels incl. Floor Level: 02 pcs Technical Data for Capacity: Pallet Positions per Bay: 09 pcs Pallet Positions per Row: 81 pcs Total Pallet Positions: 81 pcs Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Maximum Pallet Weight: 900 kg Scope of Delivery Includes: 10x Pallet Racking Uprights, used Material color: blue Profile dimensions: 100 x 65 x 2.0 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (welded truss construction) 2,200 mm high 1,100 mm deep Iodpfx Afotq Hfus Ssik 36x Pallet Rack Beams, used Material finish: Sendzimir galvanized Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3-hook Clear span: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 72x Locking Pins, used Material finish: Sendzimir galvanized To secure the beams against unintentional lift-out 40x Wedge Anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Finish: fully galvanized For leveling racking uprights placed on uneven floors 01x Load Sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. Any further transport or shipping of this item will incur additional costs, which can be requested from us depending on delivery location and scope.

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available Iiodpfxjxlppis Af Sjk -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Condition: used, Tube End Forming Machine, T-Drill SP-110, Used Machine Manufacturer: T-Drill Model: SP-110 Operation: Uncertain Overall Dimensions: Iijdpfexu E Dujx Af Sek Width: 930 mm Depth: 1520 mm Height: 1460 mm Weight: 600 kg Year of Manufacture: 2016 Air Pressure: 6 bar Electrical Data: 480V; 18.5 kW; 3x80A The T-DRILL SP-110 is a fully automatic tube end spinning machine capable of closing, reducing, and expanding primarily copper and brass tubes — typical applications include HVAC, refrigeration, and mechanical fittings. Technical Data (Summary): Tube diameter range: Ø 8 – 108 mm (≈ 5/16” – 4-1/8” O.D.) – T-Drill Oy Maximum reduction: 70% – T-Drill Oy Materials: primarily copper and brass (as highlighted in the manufacturer’s description) – T-Drill Oy Wall thickness / maximum wall thickness (according to used machine listings): e.g., one listing indicates 0.125" (≈3.2 mm) maximum wall thickness (depends on model/configuration) – Southern Fab Sales Machine features: automatic clamping, rotation + forming tools (tooling/dies), suitable for forming long or complex tube ends. Capable of closing, flattening, reducing, and expanding tube end geometries; the manufacturer’s brochure contains detailed shapes and examples. Especially suitable for HVAC and industrial refrigeration tubes.

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Year: 1991 Ijdpfxeugtv Is Af Sjik If you have any further questions, we will be happy to answer them.

Condition: used, functionality: unexamined, Used Linde T16 with charger Iiedpfxjxvifxo Af Sek

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Iisdpfxera N A Ne Af Ssk Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Iedpfxjvmfzbe Af Ssik Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: excellent (used), Clamping disc Isdjfm Tq Tspfx Af Soik with T-slots diameter 485 mm Bolt circle diameter 118 mm Hole spacing 170 mm

Condition: good (used), Table size:1500x1500mm Iisdpfx Afefvqmxj Sok Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: new, Year of construction: 2025, operating hours: 1 h, Schäffer 2630 Yard Loader New machine, approx. 3 operating hours Equipment: ROPS driver protection canopy Kubota diesel engine D1703M 18 kW / 25 HP Rear counterweight plate Hydraulic tool locking Iedpfx Afoxqt Nks Ssik Restraint system Hydraulic fast gear Additional equipment: Counterweight 81 kg Reinforced gear pump Mechanical detent for auxiliary control unit Lighting system preparation LED work light Main battery switch Tow pin + lashing eye Tires 31x15.5-15 AS Euro hitch | Internal no.: 11314119

Condition: used, Year of construction: 2023, operating hours: 2,100 h, power: 37 kW (50.31 HP), maximum speed: 20 km/h, Operating hours: 2100_____with ROPS driver protection canopyKubota diesel engine D1803-CR-T37 kW = 50 hpRear counterweight – end plateHigh-speed gear 20 km/hHydraulic tool lockingRetention systemSpecial equipmentRear chassis with widened fendersCase weight 100 kgTyres 15.0/55-17 AS, 6-hole, ET -45Reinforced gear pump 19 ccm (37 kW engine required)LED work light kit, 800 lumens (2 front, 1 rear)Pickup frame Euro-WSHydraulic lockingTow device with bolt and lashing eyesLocation: Oberlauch Isdpfxoxmrvuo Af Sjik

Condition: excellent (used), functionality: fully functional, cutting height (max.): 1,000 mm, input voltage: 200 V, throat depth: 1,000 mm, power: 1.47 kW (2.00 HP), empty load weight: 740 kg, Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Iiedpowr Nlyjfx Af Sek Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Condition: used, mileage: 253 km, power: 37 kW (50.31 HP), gearing type: mechanical, fuel type: diesel, color: red, empty load weight: 2,800 kg, number of seats: 1, first registration: 07/2023, suspension: other, operating hours: 253 h, Equipment: cabin, Radio, central armrest, diesel, year of manufacture 2023, 36.8 kW, 253 operating hours, cab, 20 km/h, headlights front and rear, radio, armrests, 1 seat, bucket, pallet fork, lifting capacity 1,000 kg, operating weight 2,800 kg. FOR US, THE CONDITION AND OVERALL FEEL ARE DECISIVE; PRICE COMES SECOND. For further questions, Mr. Faller will be happy to assist you at the following number. //*TRADE-IN, PART EXCHANGE OR LEASING OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee.* More offers can be found on our homepage: The description and data given do not constitute a guaranteed specification and are non-binding. The only binding agreement is the purchase contract concluded at the dealership upon vehicle purchase. Errors and prior sale excepted! Iijdpfx Aoxnqbrsf Sjk

Condition: used, functionality: fully functional, Year of construction: 2006, Drive via 0.37 kW geared motor Getriebebau-Nord Speed: 1,390 / 13 rpm Iijdpfx Aow U Tmfsf Sek

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 Manual transmission Tridem 4th axle is steering axle and lift axle Iiederdd Alepfx Af Sjk Wheelbase 3.80m Length of loading area: 6.80m Technically in good working order and ready to drive

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-300 is big efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: Hopper with Apron Feeder: 6 m3 Production Capacity: 220-340 Tons Per Hour Crusher Type: Cone Crusher Maximum Feeding Size: 225mm Vibrating Screen Size and Deck: 2200x5500mm 3-4 decks Total Motor Power: 300 kW Iiodpoxrycasfx Af Sjk MCC-300 is a combination of: • Apron Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Iedpfx Afow Nygnj Soik Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment

Condition: used, empty load weight: 3,580 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2007, next inspection (TÜV): 10/2025, loading space length: 6,250 mm, loading space width: 2,490 mm, loading space height: 330 mm, loading space volume: 5 m³, suspension: air, tire size: 235/75 R17,5, wheelbase: 980 mm, color: blue, Equipment: ABS, Drum brake EBS Payload 8,320 kg Downrated to a total train weight of 10,000 kg Height-adjustable drawbar Double mesh ramps GFA axles Steel side walls Drive-over at the front Errors excepted. Iisdjw H Slwjpfx Af Sjk

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Ijdpfx Afjw Nyfws Ssik Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment