Used Schaffer 4560 T for sale (13,111)

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, cooling capacity: 192 kW (261.05 HP), type of input current: three-phase, type of cooling: water, pump pressure: 2 bar, Liquid cooler CHW T 192 supplemented with automatic by-pass with pressure gauge CHW T 162-CHW T.372 Dkolevpt Iheq Ecmksl

Condition: ready for operation (used), Year of construction: 2012, 8 Ton Rewinder, Used Machine Overall dimensions: 2140 x 930 x 1070 mm Weight: 416 kg Minimum closing of the rewinder: 430 mm Maximum opening of the rewinder: 540 mm Dkslq Eoupr Ngecmksl Max. load capacity: 8000 kg

Condition: excellent (used), Year of construction: 2015, 945 USED Electric shop ovens for 40/60 sheets. Production year: 2015. The set consists of 2 ovens-model MG 159 T. The price is for 2 modules (possible purchase in a single version). The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Dkslq Ecmsu Aaf Djkel Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2015, front tire size: 540/65R30, rear tire size: 620/70R42, Equipment: compressed air brake, Tires on front axle are municipal tires / Dkjlq Ecot I E Uasmkjl

Condition: new, Functionality: fully functional, Year of construction: 2025, The basket spray washer is equipped with a control panel on which the washing and drying process is started. The machine is made of AISI 304 stainless steel, which guarantees its long service life. The spray system in the working chamber is located on the top, side and bottom, which guarantees a very good washing range. Technical data: Basket diameter: 900mm Usable height: 450mm Tank capacity: 150l Working spray pressure: 8 bar Heater power: 7.5 kW Power supply: 380V Basket load capacity: 300kg Working time programming: 0-30min Temperature control: 0-120 degrees C Additionally, the washer is equipped with an automatic drying step. Dkslq Eovr Hbaecmksl Our offer also includes other types of spray washers with basket diameters of 550, 750, 900 and 1100 mm.

Condition: good (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, table length: 700 mm, spindle speed (max.): 12,000 rpm, 60 tool places. 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Dkjlqju S A Ans Ecmksl Preparation for Blum 3D probe. Probe is not included in the scope of delivery.

Condition: new, Year of construction: 2025, FTC-300 Tracked Cone Crusher is produced in the form of feeding bunker, generator, cone crusher and stock belt, respectively.FTC-300 Tracked Cone Crusher, which is moved with a remote control, successfully completes all the commands given by the user by moving on its tracks in all harsh climatic conditions and rough terrain. FTC-300 Crawler Cone Crusher, which is delicately designed and carefully manufactured for crushing stone, is the leading tracked crusher plant in the sector with its 42,000 kg weight and 150-250 T/H crushing capacity per hour. The Vibrating Feeder Bunker has been developed by our engineers in a user-oriented manner so that the crusher, on which it is positioned on FABO vibrating feeding hoppers, works with high efficiency. Vibration speed of FABO vibrating feeding bunkers can be adjusted manually with the automation system.This feature prevents the bunker from wearing out and provides the user with a longer and more efficient use. Cone Crusher Cone crushers are the crusher of the FTC-300 tracked crushing plant that can easily crush hard stones. Dkolont Tx Rjq Ecmkjl The power transferred from the engine to the gear shaft is sent to the hub with gears. The crusher crushes the stones to pieces thanks to the core and concave inside. Standing out with its robustness and production capacity, the cone crusher ensures that the FTC-300 tracked crushing plant operates at maximum capacity thanks to its high rotor speed and robust gear structure. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of belts can be increased upon the request of the user. 10 mm EP 125 4-ply band rubbers moving on 4mm st 37 twisted sheet perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.The belt tires, which are produced resistant to wear, will never let you down and offer many years of service life. FTC-300 tracked crushing plant is controlled by a full automation system.Thanks to the automation system panel on the machine, the working mode of the machine can be adjusted.The operating principle of the machine can be easily adjusted according to the type of the material loaded by the user into the vibrating hopper.Many features such as crusher rotor speed, (Optional) bunker vibration speed can be adjusted with the automation system.

Condition: ready for operation (used), Hydraulic press, four-column press, Eitel 100T Dslqouhl E Rj Ecmkjkl Manufacturer: EITEL Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Table size: 1050x800mm Stroke length: 400mm

Condition: excellent (used), Year of construction: 2014, 944 USED Electric shop ovens for 40/60 sheets. Deleuy Nn Nsq Ecmkskl Production year: 2014. The set consists of 2 ovens-model MG 159 T. The price is for 2 modules (possible purchase in a single version). The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2022, 80x40x1000mm Forks 2to load capacity / Dkolqot A Sm Ss Ecmksl

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control name: Heidenhain TNC 426/430 X-path: 630 mm Y-path: 560 mm Z-path: 560 mm Number of axes: 5 Spindle and tool Spindle speed: 18,000 rpm Tool holder: SK 40 Number of tool positions in the magazine: 24 Tool diameter magazine 1/2: 130 mm / 80 mm Max. Tool length: 315 mm Max. Tool weight: 8 kg Feed and rapid traverse Rapid traverse X/Y: 26 m/min Rapid traverse Z: 20 m/min Feed XYZ: 10,000 mm/min Table Table dimensions: 1,000 x 600 mm Distance T-slots: 63 mm Number / size of T-slots: 9 / 14H7 MACHINE DETAILS Machine weight: approx. 6.5 t Installation dimensions: 5,400 x 4,400 x 2,847 mm Installation weight: 7.6 t Transport dimensions: 3,500 x 2,700 x 2,220 mm Transport weight: 6.7 t Dslevbgyhoq Ecmkjkl Additional equipment Rotary table and B-axis Note: Machine is set up but not connected & can be inspected under power on request

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control name: Heidenhain TNC 426/430 X-path: 630 mm Y-path: 560 mm Z-path: 560 mm Number of axes: 5 Spindle and tool Spindle speed: 18,000 rpm Tool holder: SK 40 Number of tool positions in the magazine: 24 Tool diameter magazine 1/2: 130 mm / 80 mm Max. Tool length: 315 mm Max. Tool weight: 8 kg Feed and rapid traverse Rapid traverse X/Y: 26 m/min Rapid traverse Z: 20 m/min Feed XYZ: 10,000 mm/min Table Table dimensions: 1,000 x 600 mm Distance T-slots: 63 mm Number / size of T-slots: 9 / 14H7 MACHINE DETAILS Machine weight: approx. 6.5 t Delq Ecouyizvomkekl Installation dimensions: 5,400 x 4,400 x 2,847 mm Installation weight: 7.6 t Transport dimensions: 3,500 x 2,700 x 2,220 mm Transport weight: 6.7 t Additional equipment Rotary table and B-axis Note: Machine is set up but not connected & can be inspected under power on request

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, spindle speed (min.): 120 rpm, spindle speed (max.): 1,275 rpm, lifting speed: 25 mm/s, feed length Z-axis: 500 mm, hone diameter: 56 mm, TECHNICAL DETAILS Control: Siemens PLC control S7, NAGEL honing spindle control MS-U3 Production capacity: 90 workpieces/h at 100 % capacity utilization Roundness: 0.006 mm / 0.012 mm Bore tolerance: 22.018 - 22.028 mm / 56.000 - 56.019 mm Surface roughness (Rz): 4 µm / 6.3 µm Honing time: 28 / 33 seconds Secondary time: 12 / 7 seconds Cycle time: 40 seconds Workpiece Type: Connecting rod, large and small eye Hardness: 100 - 130 HB Machining diameter: 22 - 26 mm Machining length: 20.8 - 20.23 mm Workpiece holder: clamped and held down Machining data Pre-machining: fine-turned Diameter: 21.99 - 22.01 mm / 55.95 - 55.99 mm Roundness: 0.007 mm / 0.01 mm Surface roughness (Ra): 6 - 8 / 8 - 12 µm Material allowance: 0.013 - 0.033 mm / 0.02 - 0.06 mm Tool type Tool type: Diamond, articulated rod Honing spindle Number of honing spindles: 2 Stroke length: 0 - 500 mm Stroke speed: 25 m/min (infinitely variable) Tool holder: top / bottom, infinitely adjustable Spindle speed: 425 - 1,275 rpm and 120 - 360 rpm Drive power Stroke drive power: 5.5 kW Spindle drive power: 3 kW / 4 kW Measuring technology Measuring system: electro-mechanical step expansion Air measuring device: 0.0005 - 0.08 mm MACHINE DETAILS Installation area / height: 6,200 x 3,900 / 4,300 mm Weight: approx. 8 t Color: machine light grey RAL 7035, control cabinet capri blue RAL 5019 Construction: Welded steel construction in panel construction. The uprights have been artificially aged to relieve stresses. Hydraulic equipment Hydraulic tank: 400 l Electrical equipment Operating voltage: 400 V, 50 Hz with neutral conductor Control voltage: DC 24 V Total connected load: 28 kW Standard: according to VDE 0113 Djlq Eouyidkocmkskl Note: Machine is set up but not connected & can be inspected under power on request

Condition: used, Work table with "swallowtail" fixed cuttings Overall size:1100x1400x800 mm Weight: 1880 kg Deljhyxa Aoq Ecmkskl

Condition: excellent (used), Year of construction: 2002, operating hours: 19,883 h, Functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rotational speed (max.): 12,000 rpm, pivoting range: 103 °, swivel angle B-axis (min.): 12 °, swivel angle B-axis (max.): -91 °, HIGHLIGHTS > Installation of a new spindle in March 2022 > General overhaul of NC attachment table in March 2022 > General overhaul of the tool magazine in June 2023 TECHNICAL DETAILS Control: CNC contouring control, incl. 15" TFT color flat screen HEIDENHAIN TNC 430 X-axis: 880 mm Y-axis: 630 mm Z-axis: 630 mm NC swivel milling head: B-axis Tilting range: 103° (-91/+12°) Drive power (40/100% ED): 15/10 KW Speed range: 12,000 rpm Table clamping surface: 1,250 x 700 mm NC top table: Lid 18/L01 (can be used for horizontal and vertical machining) Clamping surface: Ø 700 mm Height: 280 mm Tool holder (DIN 69871): SK40 Switch-on time: 62,431 h Program run time: 19,883 h EQUIPMENT - Closed work area with revolving door, electrically protected, incl. machine light - NC swivel milling head (B-axis) - Automatic tool changer (pick-up) ATC 32 - 3D measuring probe Heidenhain TS 642 - Operating mode 4 (extended manual intervention) Delst Tbvkjq Ecmkokl - Direct path measuring systems (resolution 0.001°) - Electronic handwheel - Production package, consisting of 600 l tank, rotating viewing window, chip flushing in the work area work area - IKZ internal coolant supply through the spindle 40 bar form AD - Spiral chip conveyor with chip ejector - External coolant nozzles switchable from water to blast air - Enclosure cooler - Set-up elements (3 wedge shoes, height-adjustable) - Documentation

Condition: used, Year of construction: 2019, Transport trolley Warning signs / Dkelq Ecmotya Itjksl

Condition: good (used), Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW Dkslq Ecjk E Dxkjmkol RPM: 2930 Loading capacity depending on viscosity.

Condition: used, Year of construction: 2024, spiral disc suspension telescopic drawbar cat. III/IV hy hydraulic / front level board air brake DSTS roller lighting rear harrow DSTS roller / Dkelqstt I N Io Ecmkjl

Condition: good (used), Work table with T-fixing cuttins Delq Ecok E Hbzomkskl Overall size:1500x1200x800 mm Weight: 2820 kg

Condition: used, Year of construction: 2022, Cab with air conditioning Tires 400 / 60 - 15 20 km/h 3rd circle / Dslq Eetrdz Nocmkekl

Condition: good (used), Size: 760 x 1010 x 100 mm Weight: 550 kg Djlokz Uyqjq Ecmkskl

Condition: used, Year of construction: 2023, spiral disc suspension telescopic drawbar cat. III hydr. air brake / harrow DSTS roller lighting certificate for type approval / Dolq Ecsr Nxy Nemkskl

Condition: used, THE PRICE IS FOR 1 PC !!! At the bottom part prismatic passages, can be paired with another table Dslq Ecmjhwv Tmjkekl Size: 5000 x 1600 x 370 mm 6 Tons / pc

Condition: used, Year of construction: 1901,

Condition: used, Year of construction: 2024, Spiral-sprung disc suspension Telescopic drawbar CAT III / IV / air brake DSTS roller Tined harrow Lighting / Dkelq Ecstpgthjmkel