Used Tos Fgs 63 Cnc for sale (25,773)

Condition: good (used), Year of construction: 2009, Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Type: HEC 1600 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 60 Pcs./pcs. Tool dimensions (with occupied adjacent spaces): 125 mm Numbers Of Pallets: 2 Operating hours: 26180 H spindle running time: 26180h 43m 46s h/m/s automatic mode: 28559 H on time: 120 H pallet change time: 60 s Cgjlewfyxkjipy Ayet Further information: internal coolant supply

Condition: used, _____ Description: Year of manuf. : 2023 Control : Siemens SINUMERIK 828D Turning diam. : 560 mm Turning length : 1000 mm Celipswgg T Rjy Aysgt Mainspindle: Technology:belt-driven spindle Speed (max.):4500 rpm Power (max.):15 kW Bar capacity:65 mm Workpiece clamping:3-jaw chuck; Autogrip 3H-210 Tool carrier (X/Z): Technology:Turret with 12 stations (BMT-interface) Tool holder:BMT-interface Traverse path X / Z:200 / 1050 mm Rapid traverse X / Z:30 / 30 m/min Tailstock: Technology:programmable Travel:900mm Cone:MK5 Equipment/Accessory: Chip management:chip conveyor with chip bucket Coolant management:high-performance coolant system with coolant pump Raw material feed:bar feeder interface Set-up mode:electronic handwheel Lubrication management:automatic central lubrication Other equipment:work light; flushing gun

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Cgolipy Aouy S Sdjyst Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: excellent (used), Year of construction: 2020, Maximum cutting diameter 150mm, spindle bore 31.75mm, distance between centre 457mm, swing over carriage 230mm, swing 280mm, spindle speed 50-4000rpm, spindle power 3Hp, Compound slide travel 76mm, cross travel 152mm, Cgjlipjwcp E Usy Ayet 3 & 4 jaw chucks, fixed steady, digital screwcutting, taper turning attachment , coolant.

Condition: as good as new (ex-display), CNC ultra high pressure water jet cutting machine SAME /Bogacki - 2515 BA 2D -demonstration machine - travel: 2.550 x 1.550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics. Handwheel incl. high pressure pump HB 50 Cslipegq Nqbey Aysgt incl. stainless steel working table ( 2.700 x 1.700 mm) incl. CE- safety device (light barriers) incl. splash guard (see pictures) incl. abrasive container (250 kg) incl. abrasive cutting head Allfi incl. red light laser incl. drilling unit 4mm diameter receptacle ER 16 - few operating hours

Condition: good (used), Planing width 630 mm Planing height 230 mm Planing table length approx. 2.20 m Two-knife spindle Motor 6.5 HP Manual table lift Weight approx. 1300 kg No motor brake External dimensions approx. 2300 x 1400 x 1200 mm Cgslipswf Ur Eoy Ayjt The data was taken from a brochure and is therefore without guarantee.

Condition: used, Year of construction: 2015, Working dimension X: 6.000 mm Working dimension Y: 1.400 mm Working dimension Z: 125 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 9 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: Aggregate interface HOMAG Flex 5 Plus interface: Yes Tool clamping system: HSK-F63, WFC 40 Tool changer positions: 28 Disc tool changer 8-fold: Yes Disc tool changer 14-fold: Yes Linear tool changer: Yes Tool changing auxiliary device: Yes Number of exchangeable units: 1 HOMAG Flex 5 Plus aggregate: Yes Vertical drilling spindles: 21 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Gantry machine: einseitig angetrieben Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Electronic supervision of the end-position of the stops: Yes Stop for top layer protrusion: Yes HOMAG Lateral stop system PURE STOP: Yes Number of consoles: 12 Pneumatic pipe connectors: an den Konsolen 4-field processing: Yes Positioning aid: Yes Crosshair laser: Yes Vacuum pump: Yes Safety device: Safety mat Automatic central lubrication: Yes Cjlipy Aewf Nbhsysgt HOMAG ecoPlus: Yes WEEKE Quality package: Yes Handheld terminal: Yes Software: HOMAG WOODWOP 6.1, HOMAG, HOMAG MDE Conformity marking: CE mark

Condition: good (used), Year of construction: 1990, Functionality: fully functional, CNC Lathe YCM TC-2 Item number: 04-02-090 Manufacturer: YCM Good overall condition Workshop-tested machine Delivery time: Immediately – subject to prior sale Year of manufacture: approx. 1990 Dimensions (L x W x H): approx. 2400 x 1400 x 2100 mm Weight: approx. 3600 kg Control: Fanuc O-T Technical specifications: Swing over bed: approx. 480 mm Swing over cross slide: approx. 310 mm Spindle bore: approx. 52 mm Max. machining diameter: approx. 250 mm Distance between centers: approx. 550 mm Spindle speed range: approx. 110–3500 rpm Feed rate X-axis: approx. 10 m/min Feed rate Z-axis: approx. 15 m/min Turret: 8 stations Accessories: 3-jaw chuck Various tool holders Chip conveyor Machine leveling feet Documentation Cgjlipowfw Suey Ayst Live center Various chuck jaws Further accessories available on request. Price and additional technical details available upon request.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Cgjleuy S R Teipy Ayet Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, Year of construction: 2014, turning diameter max. 356 mm turning length 705 mm control 730 UM Celos greates pass round over bed 920 mm Swing dia. over traverse guideway 740 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min Coliswd Txnjpy Aysgt Tipp feed 0 - 5.000 mm/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 49 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only 13.000 hours of processing time - incl. 4x driven tools - incl. 6x standard holders

Condition: used, CNC 3D coordinate measuring machine, MORA type Pico 0245.04.05.06 Colipyerdlrxj Ayjgt Machine No. Year of manufacture 2005 Measuring range X = 600 mm, Y = 500 mm Measuring height Z-axis 400 mm Machine table = granite slab 1250 x 1200 mm Slab thickness 200 mm Clearance in machine column 720 mm Axis travel speed - setup max. 65 mm/sec. Axis travel speed - rapid traverse max. 250 mm/sec. Mains connection: 400 volts, 50 Hz - Granite worktop with 200 mm threaded grid - RENISHAW PH10T motorized rotary/tilt head with interchangeable TP20 measuring probe - 1 probe head holder with manual adjustment - Various probe heads - Gemodek Microspeed 10 axis control in adjacent control cabinet - Manual control via handheld control panel with joystick and LCD display - Reference sphere on the table - PC for measuring software: Intel Pentium 4, 512 MB RAM, mounted in the machine base - 22-inch TFT monitor - Windows XP operating system - INCA 3D measuring software (license expired) The measuring machine was operated with a rental license and maintenance contract. Measuring machine footprint: W x D x H 1950 x 1800 x 2450 mm Measuring machine weight: 1250 kg Control cabinet weight: 120 kg Very good condition

Condition: new, Sheet width 3100 mm sheet thickness 10 mm cutting angle 2 ° Hold down 14 pieces Stroke rate 13 strokes/min throat 350 mm Oil capacity 260 l Control CYBELEC CybTouch 8 Total power requirement 22 kW Machine weight approx. 10.550 kg space requirement approx. 4000x2250x2050 mm Equipment: - Hydraulic swing cut plate shear - touch screen controller with digital display for backgauge - automatic cutting gap adjustment via controller - backgauge control 1000 mm travel with ball screws - Swing cut machine with cutting gap adjustment - 2 backgauge arms - 1 side stop - light barrier behind the machine - cutting length limitation - cutting line illumination - chrome steel knives - ball rollers in the table Colisk Tzztepy Aysgt - hinged finger guard with limit switch - foot switch - CE-sign / declaration of conformity - Operating instructions in German

Condition: used, -Motorized thicknessing table lift with two speeds -Numerical display for working height -Gray cast iron thicknessing table -The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision -Four feed speeds -Optional with two rollers in the thicknessing table -Standard with noise protection and chip protection curtains at the workpiece inlet and outlet -Adjustable roller contact pressure Cgjlisu T Hq Espy Ayjt -Front feed roller with helical gearing -Rubber-coated feed roller -Powerful industrial motor Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter, thickness: 150 mm Installation information: - Space required length: 1305 mm - Space required width/depth: 1080 mm - Space required height: 1197 mm - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Explanation of the working area: Please add the specified dimensions to the space required to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 300 mm - Minimum working length (thickness): 210 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 9 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 4500 rpm - Maximum planing width: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Year of construction: 2022, Condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 Cgslipysiwfp Te Ayot - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 50 CNC milling machine direct from the manufacturer. - Machine in column construction made of cast iron for high rigidity - Carousel tool changer with 8 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 10 kVA Milling spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 24 Nm Drive motor S6-30% operation 5.5 kW Cgolipouy Nh Ney Ayot Torque drive motor S6-30% operation 36 Nm Spindle holder BT 30 Coolant system Coolant pump output 450 W Tank capacity 70 liters Milling accuracy Repeat accuracy 0.015 mm Positioning accuracy 0.015 mm Tool changer Carousel type Number of tool positions 8 positions Tool diameter max. 100 mm Tool length 200 mm Tool weight max. 6 kg Tool change time according to VDI 2852 7 seconds Travel distance X-axis 330 mm Y-axis 220 mm Z-axis 320 mm Feed drive Rapid traverse X-, Y-, Z-axis 15 m/min. Motor torque X-axis 3.5 Nm Y-axis 6 Nm Z-axis 6 Nm Speed range Speeds* 10,000 min-1 Pneumatics Air pressure 6 bar Milling table Distance spindle - table 90 - 410 mm Distance spindle - column 280 mm Table length x width 690 x 225 mm T-slot size / number / distance 14 mm / 3 / 63 mm Max. load 150 kg Dimensions Length x width x height 2,030 x 1,600 x 1,980 Total weight 1,900 kg

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0040000963C, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 14 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 550 mm, tool mount: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 192 Nm, bar passage: 52 mm, total height: 1,850 mm, total length: 4,100 mm, total width: 2,600 mm, overall weight: 4,500 kg, controller manufacturer: Siemens, controller model: SINUMERIK 840D, distance between centers: 700 mm, operating hours of spindle: 6,230 h, Equipment: documentation/manual, rotational speed infinitely variable, Equipment highlights: - 12 driven tool stations - Counter spindle - Permanently integrated Y-axis - VDI30 tool holder - Tool package with rigid holders - Chip conveyor included - Control system: Siemens SINUMERIK 840D - Machine hours: 10,270 h - Spindle hours: 6,230 h Please note: The supplied chuck and tool holders do not correspond to the components currently installed or clamped on the machine. Technical Specifications: General: - Year of manufacture: 2014 - Max. connected load: 30 kVA - Mains voltage: 400 V, 50/60 Hz - Control voltage: 24 V - CE-certified Cgolipowdyh Ney Ayot Machining range: - Max. turning diameter: 500 mm - Max. turning diameter in the slide area: 290 mm - Max. turning length: 500 mm - Distance between centers: 700 mm Travel paths: - X-axis: 210 mm - Y-axis: ±40 mm - Z1-axis: 525 mm - Z3-axis: 550 mm Main spindle: - Max. speed: 6000 rpm - Power: 13 / 14 kW - Torque: up to 192 Nm - Spindle bore: 52 (67) mm - Spindle nose: FL 140h5 Counter spindle: - Maximum speed: 6000 rpm - Power: 12.6 / 16.2 kW - Spindle bore: 44.5 mm - Spindle nose: FL 140h5 - Spindle nose spacing: 780 mm - Max. workpiece weight (counter spindle): 80 kg Turret & Tools: - Tool holder: VDI30 - 12 tool positions (all driven) Driven tools: - Speed: 5000 rpm - Power: 4.18 kW - Torque: 20 Nm - Tool change time: 0.4 / 0.7 s Travel speeds & accuracy: - Rapid traverse X/Y/Z: 30 / 22.5 / 30 m/min - Resolution XYZ: 0.001 mm - Ball screws: 32x10 mm - Accuracy according to VDI/DGQ 3441: - X/Y/Z: 10 µm (new machine) - Z3: 16 µm (new machine) - Repeatability: 3 µm (new machine) Dimensions: - Transport dimensions (without chip conveyor): 3330 x 1946 x 1829 mm - Overall dimensions (including chip conveyor): 4066 x 2583 x 1829 mm

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, TECHNICAL DETAILS: CNC Control: CNC Control: MSC-501 (FANUC 18i-TA) X axis mm: X axis mm: 260 Z axis mm: Z axis mm: 1,000 Y axis mm: Y-axis mm: - Maximum Turning Diameter mm: / Max. Turning Diameter mm: 250 Cº Axis Increase: Cº Axis Increase: 0.001 Maximum Turning Length: Max. Turning Length mm 1,000 Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y Swing over bed mm: Swing over bed mm: Ø 520 Swing over slide mm: Over cross slide mm: Ø 330 Bar work capacity mm: Bar work capacity mm: Ø 65 (main) Max. mm / min X,Z,Y: Rapid traverse max. mm / min X, Z, Y: 30,000 / 10,000 Main Spindle L-SPINDLE 8” Spindle speed rpm: Spindle speed rpm: 4,000 Spindle power kW: Spindle power kW: 15 / 11 Torque Nm: Torque Nm: - Main spindle bore mm - Main spindle nose A2-6 Upper turret positions: 12 Number of rotating tool stations (each turret): 12 Cgslipy Aewdrvfoyst Rotating tool speed: 6,000 rpm Rotary tool power: 5.5 EQUIPMENT: Chip conveyor DIMENSIONS OF THE MACHINE / MACHINE DIMENSIONS: Length mm / Length mm: 3,500 Width mm / Width mm: 1,700 Height mm / Height mm: 2,000 Weight kg / Weight kg: 6,000

Condition: used, Year of construction: 2003, Saw blade diameter 300x32x2.5 mm Cutting range at 90 degrees: round 10-90 mm Cgelipjtyma Nsy Ayet Cutting range at 90 degrees: flat 80x10-80 mm Cutting range at 90 degrees: round - solid material 10-40 mm Cutting range at 90 degrees: square - solid material 10-40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square 10-80 mm Machine weight approx. 600 kg Space requirement approx. 2590x1910x1910 mm

Condition: used, Year of construction: 2015, machine/vehicle number: 917, 5-Axis CNC Gantry Milling Machine HG GRIMME SysTech GmbH G-DT-F 12/10 SB Machine Data Year of Manufacture: 2015 Serial Number: 917 Operating Hours: 12,613 h External Dimensions: 6,382 x 3,568 x 3,180 mm (L x W x H) Workpiece Material: Plastic Workpiece Size: Max. 1,200 x 1,000 x 400 mm (L x W x H) Travel Paths: X = 1,800 mm, Y = 1,600 mm, Z = 815 mm, C = +365°/-95°, A = +/-181° Electrical Data Voltage: 230/400 V Power: 24.5 kW Frequency: 50 Hz Csliewfid Nopy Ayogt Milling spindle Manufacturer: Jäger Type: Z80-K530.04 Tool holder: WK25 Power: 4.6 kW Speed: max. 30,000 Balancing: Quality level Q < 0.4 Control system Manufacturer: SIEMENS Type: SINUMERIK 840D sl Operator panel: OP 10 C Note: This is a starting price. The sale will be made via an online auction to the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training Cjlipyjqgcq Hj Ayjgt

Condition: good (used), Year of construction: 2000, Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Machine weight approx. 11000 kg Cslipy Ajq R T Stjyogt

Condition: used, Year of construction: 2017, machine/vehicle number: 4445, REICHENBACHER ECO-RS III DUO 5-Axis CNC Machining Center Machine Data Year of Manufacture: 2017 Machine No.: 4445 Operating Hours Spindle 1: 7,685 h Operating Hours Spindle 2: 7,098 h Footprint: X = approx. 5.8 m, Y = approx. 3.6 m, Z = approx. 3 m Machine Weight: approx. 15 t (with control cabinet, without auxiliary units) Rated Power: 7 kW (S1 operation), constant from 12,000 - 40,000 rpm Speed: 1,000 - 40,000 rpm, clockwise/anticlockwise rotation Travels: X = 2,320 mm, Y = 1,980 mm, Z = 860 mm Cjlipy Ajwfid Ajysgt Tool Holder: HSK-40 Tool Length: max. 270 mm from spindle nose Tool diameter: max. 40 mm Saw blade diameter: max. 240 mm Control system Manufacturer: SIEMENS Type: SINUMERIK 840D Solution Line CNC control: NCU 720.3B Note: This is a starting price. The sale will be conducted via an online auction against the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, pressing force: 220 t, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-6C - Pressing force: 2200KN - max. bending length: 4100mm - Year of construction 2007 Cgjlijvkcvwepy Ayjt - CNC controlled hydraulic crowning - Cybelec Modeva 10S controller - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2 - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with lightbarrier - 6 month guarantee - Commissioning, training

Condition: good (used), Swing diameter 450 mm Swing diameter over turret 375 mm Turning diameter 250 mm Turning length 455 mm Travel distance - x 190 mm Travel - z 480 mm Bar diameter 65 mm Speed 3000 rpm Weight 3800 kg Equipment: - FANUC control - 3-jaw chuck - 12-position turret VDI 30 - C-axis - Driven tools - Tool measurement in the machine - tailstock - chip conveyor - coolant device - parts catcher Operating hours: 4,173 h Cgelipy Ajt N Tlcsyot

Condition: new, Year of construction: 2023, operating hours: 0 h, new IMMEDIATELY available CNC press brake YAWEI PBC50/2050-4C Cgjlipy Ajqgcrnjyst - Pressing force: 500KN - max. bending length: 2050mm - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - WILA hydraulic upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS II - 12 months warranty - Commissioning, training