Used Tos Fgs 63 Cnc for sale (25,793)

Condition: ready for operation (used), Lang CNC L-Step 22/2 MFP stepper motor control SN: V / 200 - 240 V / 50 - 60 Hz, used, good condition, % functional, scope of delivery as per photos Cjlqw N Eopnpm Is Ajgt

Condition: used, Year of construction: 2014, turning diameter 260 mm Cgelqw N Eswgi Iws Ajt turning length 450 mm control Heidenhain turning speed range - main spindle max. 5.000 min/-1 drive capacity - main spindle 16,5 / 11 kW tool taper VDI 30 number of tool places 12 Pos. x-axis 160 mm z-axis 450 mm total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 5 x 2,2 x 1,8 m In our opinion, the machine is in very good condition Used condition and can be viewed under power by appointment become. Technical features: - Operating hours: approx. 18.876 h - Spindle hours: approx. 4.501 h Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 1998, Condition: reconditioned (used), Machine is in very good condition. Capacity, Ø mm / 90 x 5 radius, min./max. / 50/400 Bending Rate/Repeatability / 40º/s. ±0.1° Mandrel length 4 000 Weight, kg 10 000 Machine dimensions 6.7 x 1.7 x 1.8 Engine kW / 40 Length feed 900 mm/sec Tolerance degree 0.05-0.1°/mm Tools: 48.3-50-57-88.9mm Cjlqw Njh I Dtwe E Aogt

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details turning diameter 320 mm turning length 810 mm control FANUC MSX-701 / MAPPS 3C total power requirement 89 kVA kW weight of the machine ca. 8,3 t Additional information CNC high-performance CNC turning and milling center The machine has been running with oil. Condition: Very well maintained, the machine has recently been checked by a service technician with geometry measurement. We can send you with WhatsApp videos of the machine check up of our service technican. The machine has received a new Mapps unit with the latest version Mapps 3C including USB connection. Costs approx. EUR 8-10,000 including installation. Equipment: CNC control FANUC MSX-701 / MAPPS 3C Bar loader LNS SPRINT 552-565 Collet chuck HAINBUCH SPAN-TOP 65 on main and sub-spindle Basic range of standard turning holders and driven holders Fire extinguishing system made by Siemens Chip conveyor Coolant system with high-pressure filter system Workpiece unloading device with gripper Tool pre-setting device on spindle 1 and 2 Technical data: Swing diameter over bed 800 mm Swing diameter over cross slide 800 mm Maximum turning diameter 320 mm (interference with turret cover) Standard turning diameter 200 mm Maximum distance between the centers 1130 mm Maximum turning length 810 mm Csljwgaqisqw N E Asgt Maximum workpiece size 300 mm Travels: X-axis turret 1 and 2 210/210 mm Y-axis 100 mm (+65/-45 mm) Z-axis turret 1 and 2 810/810 mm B-axis 920 mm (headstock 2) Main spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Sub-spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Feed drives: Rapid traverse turret 1 X/Y/Z 30/20/50 m/min. Rapid traverse turret 2 X/Z 30/50 m/min. Tool turret: Number of turrets 2 Number of tool stations per turret 16 Of which 16 prepared for driven tools Shaft cross-section for turning tools 20 x 20 mm Maximum shaft diameter for boring bars 32 mm Turret switching time (1 station) 0.18 s Maximum speed of the driven tools 6000 (12000) rpm Drive power for driven tools 7.5/5.5 kW (5 min/continuous operation) Dimensions, weights: Installation area without chip conveyor 3930 x 2721 mm Installation area with chip conveyor, ejection on the right 5120 x 2721 mm Total height (without automatic door) 2320 mm Net weight 8300 kg

Condition: excellent (used), Year of construction: 1999, CNC Control: MSD-501II (FANUC 18i-T) X-axis mm: 210 Z-axis mm: 550 Y-axis mm: - Maximum Turning Diameter mm: 250 C-axis Increment: 0.001 Maximum Turning Length: 500 Cutting Feed mm / min X, Z, Y: - Cjlqw Newf E Ane E Aogt Travel over Bed mm: Ø Travel over Carriage mm: Ø Bar Pitch mm: Ø 51 Max Rapid Traverse m / min X,Z: 18.24 Main Spindle 6" Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Spindle Bore: - Main Spindle Nose A2-6 Sub-Spindle Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Sub-Spindle Bore mm 41 Sub-Spindle Nose A2-5 Turret Positions 12 Number of Live Tool Stations 12 Live Tool Speed rpm: 3,000 Live Tool Power kW: 5.5 EQUIPMENT Chip Extractor Bar Loader 10-65 Bar Loader Interface Manuals Included Basic Fixed Tool Holder Equipment 1 x Axial and 1 x Radial Power Tools

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Working dimension Z: 250 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool changer positions: 28 Linear tool changer: Yes Disc tool changer 18-fold: Yes Pickup change place: Yes Vertical drilling spindles: 12 Celqev Ezk Nsw N E Ajgt Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Chip deflector: Yes Control: PC control Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: ready for operation (used), Deckel Maho 27073757 / a Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cgolqw Nji D Un Uo E Ajt

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Power-operated horizontal and vertical tool clamps - Automatic speed control gear - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Year of manufacture 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing three-phase brake motor: Manual gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes Cgjlewhk Uboqw N E Ast - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space required (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, bending angle: 182 °, bending radius: 400 mm, total length: 7,000 mm, total height: 1,800 mm, total width: 2,200 mm, thorn length: 4,000 mm, overall weight: 16,000 kg, pipe diameter: 127 mm, type of input current: three-phase, wall thickness: 5 mm, feed length Z-axis: 4,000 mm, motor voltage: 400 V, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Cgslqw Nou Rf E Ej E Ast Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Cgslswgaplsqw N E Aot Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: ready for operation (used), total height: 2,865 mm, total length: 4,200 mm, throat depth: 400 mm, operating speed: 22 mm/s, table width: 120 mm, retraction speed: 200 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman Touch, power: 27 kW (36.71 HP), net weight: 11,000 kg, opening height: 400 mm, passage width: 2,600 mm, total depth: 2,725 mm, 2 buighulpmiddelen Turbo-versie Eenvoudig vorm lasermeetsysteem Lasersafe-beveiliging Capacity: 135 ton x 3100 mm Celov S Anijqw N E Ajgt Backgauge: CNC Locking speed: 180 mm/sec

Condition: used, Year of construction: 2022, Working dimension X: 3.300 mm Working dimension Y: 1.250 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 12 Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in Y-direction, in X-direction Gantry machine: einseitig angetrieben Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Pendulum machining: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Celqw Nowg Smve E Aegt Handheld terminal: Yes Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 CREATE, PC office licence Conformity marking: CE mark, UKCA-Zeichen Total connection: 18 kW

Condition: ready for operation (used), Deckel Maho 27073757 / a Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Colqw Nji D Upcj E Aogt

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Dimensiones mesa: 6.000 x 2.000 mm Número de ranuras T: 13 Medidas ranuras T: 22 mm Traverses of axis Recorrido longitudinal X: 6.000 mm Recorrido transversal Y: 3.800 mm Recorrido vertical Z: 1.000 mm Capacidad vertical (VC): 500 / 1.500 mm (salida directa) Distancia entre columnas: 3.100 mm Milling head Cabezal universal (UM40 – Cuerpo B: manual / Cuerpo C: 3º auto-indexado) y Salida directa Amarre herramienta: Hidráulico Cono: ISO50 (DIN-69871)  /  Tirante: DIN-96872 Gama de velocidades: 3.000 rpm Potencia mandrino: 30 kW Feedrates Avances rápidos (X / Y,Z): 7.200 / 12.000 mm/min Weight and dimensions Peso aproximado máquina: 50.000 Kg Peso máximo sobre mesa: 15.000 kg Dimensiones aproximadas máquina: 14.740 x 5.330 x 5.050 mm Accesories Carenado: 2 puertas correderas con nuevo vallado perimetral de seguridad Cambio de cabezales: automático con bisagra/soporte lateral en columna Evacuador de virutas: 2 longitudinales por paletas Volante electrónico: Nuevo HR-510 Taladrina: Externa e interna alta presión a través del mandrino (interna sólo con la salida directa) Cgslqswfunysw N E Aot Sales conditions Garantía: Repuestos mecánicos 6 meses Precio y condiciones de venta: Consultar View all technical features

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Main Drive Number of axis 3 Additional Equipment Scope of delivery: Machine, clamping system, chip conveyor Cgelqw N Ejwhgr No Ast This 3-axis GORBREX TKV 525 CNC was manufactured in 2021, offering precise vertical turning capabilities. Ideal for detailed machining tasks, this machine maintains robust construction and modern design. Consider the opportunity to buy this GORBREX TKV 525 CNC vertical turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs EUR 118,436.00) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 Cjlqwjwgagdj N E Aogt spindle turning speed range 2400 rpm bore capacity in steel 60 mm max.drill diameter 60 - 300 mm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, net weight: 20,000 kg, Type: Stanko 1516 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat Maximale horizontale slak: 950 mm Maximale verticale slak: 700 mm Horizontale schuifmaat Maximale horizontale slak: 630 mm Maximale verticale slak: 1000 mm Dwarsbalk maximale slak: 660 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Colqov Sftzow N E Asgt Long: 3170 mm Wide: 3030 mm

Condition: good (used), Year of construction: 2005,       X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. Cslqw Newf Dxzj E Aegt

Condition: ready for operation (used), Deckel Maho 5100027000 Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cgslqei D Upgjw N E Ast

Condition: good (used), Year of construction: 2005, Gildemeister CTX 210 V3 Year of manufacture 2005 Machine number 0145000132A Fanuc control Maximum turning length: 300 mm Max. turning diameter: 200 mm Spindle bore: 45 mm Turning diameter over bed: 380 mm Main spindle speed range 6000 rpm Main electronic connection: 400 V / 50 Hz Total power requirement: 21 kVA Dimensions LxWxH 2885 x 1720 x 1670 mm Weight approx. 4200 kg Travel paths: X-axis 165 mm Z-axis 340 mm Equipment: - Driven tools - Tool holder VDI30 - Part catcher - Tailstock - Chip conveyor - 12 Turret positions The machine was in operation until recently and is fully functional. Price net, free loading from warehouse Cgjlqwjvt S H Ds N E Ajt

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 31-44367, Gebr. Horizontal CNC machining center Make: HELLER Colstq Tnmeqw N E Aegt Type: MC16 Year of manufacture: 2000 P/N: 31-44367

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 315 mm z-travel 495 mm table surface area 1.230 x 410 mm quill travel 180 mm control Heidenhain TNC 426 tool taper SK 30 total power requirement 20 kW weight of the machine ca. 3,2 t Celqw N Eswf D Atj Asgt In our opinion, the machine is in very good condition and can be viewed under power by appointment. The chuck on the 4th axis and on the table are not included in delivery. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Hand-insertion-safe - Projection 450 mm table 700 x 780 mm Capacity 63 to Cgslqw N Eowg A Nze Aot 2 stroke rates 105 /min optional 140 /min ram stroke 8-100 mm ram adjustment approx. 70 mm Plunger, W x D approx. 450 x 280 mm Installation height approx. 310 mm . More according to offer ! .....

Condition: ready for operation (used), M.G.M electric motors Type: BMX 63 C4 Motor SN:21430780, as good as new, in good condition, 100% functional, scope of delivery as per photos Cgjlqwoi D I H Do N E Aet

Condition: used, Year of construction: 2013, x-axis 330 mm z-axis 1.050 mm control Heidenhain spindle tunring speed 3.200 U/min drive capacity - main spindle 33 kW turning diameter 465 mm turning length 1.050 mm swing diameter 680 mm chucking diameter 305 mm spindle bearing diameter 100 mm spindle bore 76 mm max. rod diameter 72 mm number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected Celqw N Ejvy Iphe Ajgt under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!