Used Tos Fgs 63 B for sale (24,105)

Year of construction: 2016, Condition: ready for operation (used), Compressed air supply: 6bar, connected load: 2.7kW, weight: 450kg with documentation and Single-Head Welding Machine Rottler und Rüdiger Roweldo S X7, year of construction: 2016, an inspection is possible. Fgjlnjgfbqnj Nrnfjb

Condition: used, internal grinding machine, internal grinding device, internal grinding spindle, drum grinding machine -Manufacturer: Paul Eugen Mayer, internal grinding machine type PMB -Drive motor: Hanning 1.1 kW / 2810 rpm -Grinding drum: Ø 100 x 140 mm / see photos -Support table: swiveling Fgeln Nrnjmghatefob -Dimensions total: 580/500/H1180 mm -Weight: 99 kg

Condition: used, machine/vehicle number: B33652, spindle passage:60 mm turning length:45 mm boring depth::56 mm turning speeds::70 mm total power requirement:5,5 kW Feln Nrotzf Slonfegb dimensions of the machine ca.:2100 x 1000 x 1800 mm weight of the machine ca.:2,4 t

Condition: used, Manufacturer: Kleemann Type: B800H Cone diameter: 800mm Electrical Motor: Included Fgelnsh Nnh Ro Nrnfsb

Condition: used, Year of construction: 2023, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table Foln Not U Sc Dornfsgb - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, Boring power 60,0 mm bore capacity in cast iron 70,0 mm bore stroke 260 mm table surface area 600 x 600 mm thread dia. bis M 42 M throat 420 mm turning speeds 64 - 1210 U/min morse taper MK 5 feed 0,1-0,2-0,3-0,4-0,5-0,6 U/min column diameter 220 mm T - slots - width 30 mm engine output 5,5 kW weight 820 kg range L-W-H 650 x 1600 x 2640 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears Fgjln Nrnjixmk Eofeb - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Year of construction: 1991, Condition: ready for operation (used), Working width: 900mm, sanding heads: 1x sanding belt head/1x wire brush head, motor power head 1/head 2: 16kW/15kW, belt speed: 4m-20m/min, max. workpiece thickness: approx. 130mm. Machine dimensions X/Y/Z: approx. 2000mm/1850mm/2000mm, weight: approx. 1800kg, operating hours: 30691h. On-site inspection is possible. Fgoln Nrsufqfwsnfsb

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, directional control valve -Magnetic valve -Type: MEH-5/2-1/8-B -Series: V402 -PN: 2.5-8 bar -Number: 5x valves available Fjln Nrnjb A H Hpjfogb -Price: per piece -Weight: 0.3 kg

Condition: good (used), Functionality: fully functional, Hako B43 S combination floor cleaning machine with accessories: Manufacturer : HAKO Werke GmbH Germany S/N 740671353081 Fjlnoty Su Ee Nrnfogb Functional Suction pump, washing brush or squeegee Battery charger 24 V Charging voltage 800 W 90 kg CE marked

Year of construction: 2012, Condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Included: – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock! Fgsln Nreilh Efsnfob

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm Fgeln Nrnet U Scwefjb spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 2,7 x 0,7 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, Boring power 50,0 mm bore capacity in cast iron 60,0 mm bore stroke 230 mm thread dia. bis M 36 M table surface area 550 x 550 mm throat 400 mm turning speeds 54 - 1032 U/min morse taper MK 4 feed 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width 30 mm column diameter 200 mm engine output 4,0 kW weight 720 kg range L-W-H 600 x 1600 x 2450 mm Felnoixmkzj Nrnfegb Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Year of construction: 2007, Condition: ready for operation (used), Throughput: 300kg/m², max. working width: 1500mm, max. workpiece thickness: 20mm, min. workpiece dimensions X/Y: 50mm/50mm, number of brushes: 4, brush heads: 2, machine dimensions X/Y/Z: approx. 2800mm/1500mm/1500mm, weight: approx. 1800kg, operating hours: 51h. Documentation available. On-site inspection is possible. Fjljudy S Djn Nrnfjgb

Condition: used, Sprockets, duplex sprocket, sprocket -Sprocket pitch duplex: 1 "x 17.02 mm -Number of teeth: 57 teeth -Diameter: 471 mm Fsln Nrsdg Snqsnfsgb -Total width: 90 mm -Tooth width: 17 mm -Take: Ø 90 mm -Number: 2x sprockets available -Price: per piece -Weight: 62 kg -other sprockets in stock

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW Fgsln Nrnekahu Ujfob column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Year of construction: 2010, Condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Fgoln Nrnou T Rgqofjb

Condition: used, Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor Foln Nrouz H U Njnfogb -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: B 12 01 04 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg

Year of construction: 2002, Condition: ready for operation (used), Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y/Z: 28020mm/655mm/640mm, max. table load: 800kg, speed: 12000rpm, spindle power: 18.5kW, tool holder: SK40, tool positions: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 2850mm/3350mm/2800mm, weight: approx. 6100kg, control: Mazatrol 640M. Documentation available. On-site inspection is possible. Fgslsvu Dd Dsn Nrnfob

Condition: used, Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 10x gear motors available -Price: per piece Fjln Nrnoc Sr Insfjgb -Weight: 19 kg

Condition: ready for operation (used), Year of construction: 2018, Packaging speed: 10-150/min, max. film width: 450mm, min./max. cutting length: 100mm/340mm, max. product width/height: 140mm/80mm, control: Fuji Map Check 3, documentation available. On-site inspection is possible. Fgjlet R Tq Uen Nrnfob

Condition: ready for operation (used), Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg. Fsln Notxbz Eornfegb

Condition: ready for operation (used), Year of construction: 2019, Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available. Fjlnotlucnj Nrnfegb

Year of construction: 2010, Condition: ready for operation (used), Travel X/Y/Z: 760mm/845mm/660mm, A-axis: -125°/+10°, C-axis: 360°, number of pallets: 3 square and 2 round, pallet diameter: 630mm, max. workpiece diameter: 630mm, max. workpiece height: 450mm, max. workpiece weight: 350kg. Speed: 12000rpm, spindle mount: HSK-A63W, spindle power: 22kW. Tool positions: 160, tool magazine: matrix magazine, rapid traverse X/Y/Z: 60m/min, rapid traverse A/C: 25rpm / 220rpm. Machine dimensions X/Y: approx. 7700mm/4000mm, weight: approx. 15000kg, control: Siemens 840 DI. Including Renishaw OMP60, Blum laser measuring system, cooling water recooler with heating function. Tool magazine is defective, therefore only half of the slots can be used. Documentation available. On-site inspection is possible. Fsleu Rc Sisn Nrnfegb

Year of construction: 2004, Condition: ready for operation (used), Number of spindles: 7, min. glass dimensions X/Y: 40mm/40mm, min. glass height: 35mm, glass thickness range: 3mm-20mm, bevel angle: 3°-45°, max. bevel size: 50mm, working speed: 0.5m-4.1m/min. The machine is missing maintenance, the rear chain is defective and various minor repairs are required. An on-site inspection is possible. Folneud Suws Nrnfegb

Year of construction: 1992, Condition: ready for operation (used), Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible. Fgsln Nrnovxvfnjfsb