Used Tos Fgs 63 B for sale (24,212)

Condition: excellent (used), Working width [mm] 630 Machine table dimensions [mm] 640x1000 Working height min/max [mm] 3.5/ 230 mm Motor power [kW] 4.5 kW Planing shaft speed [rpm] 4500 Shaft diameter [mm] 120 4 knives [mm] 35x3x640 Feed speed [m/min] 6/ 12 Suction nozzle diameter [mm] 150 Machine table height adjustment with handwheel via 4 steel threaded spindles Steel link pressure feed roller Steel pull-out roller 2 under-table rollers Motor protection switch and undervoltage release Manual star-delta switch Emergency stop switch V-belt NEW Ball bearing NEW Planer blade NEW Dimensions L x W x H approx = 1100 x 1300 x 1300 mm Weight approx. 900 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Dcob Ha Reuxpuysw Sjg (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 170 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 5,000 rpm, bar passage: 45 mm, CNC Fanuc 32i – model B WORKING RANGE Max. workable bar diameter: mm 45 Max. diam. workable from recovery: mm 220 Max. workable length: mm 560 Max. rotating diameter: mm 580 MAIN SPINDLE Max. rotation speed: rpm 5,000 Spindle nose: ASA 5 “ Spindle hole: mm 52 Internal diameter of bearings: mm 90 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction B-axis rapid: m/min 15 TURRET Number of positions: No. 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: No. 12 Max. rotation speed: rpm 4,000 Motor power: kW 3.7 Motor torque: Nm 47 C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: rpm 100 AXES X-axis travel: mm 170 Z-axis travel: mm 560 Y-axis travel: mm + 55 / – 50 B-axis travel: mm 490 X-axis rapid: m/min 20 Z-axis rapid: m/min 24 Y-axis rapid: m/min 6 Dcob Haswhlf Ue Rw Sjg COOLANT Tank capacity: l 250 Pump flow rate: l/min 230 Pump motor power: Kw 1.5 DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: mm 4.240 x 2.000 x 2.020 h Height of spindle center: mm 1.000 Weight with chip conveyor: Kg 4.900 Equipment machine: • 3-jaw Autoblock self-centering chuck diam. 210 mm • Various motorized modules (axial + radial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2012

Condition: used, 10 Bilz quick change recordings WES 16 x 22 3 B. 3 units available WES 3B 20 x 16 1 x "available WES 3B 22 x 18 2 x. "available WES 3B 25 x 20 3 x "available WES 3 B 28 x 22 1 x "available Dcob Hedn Swrja Rw Sog

Condition: ready for operation (used), KUKA KS5CC-YYY-050 AC servo motor E Stand B SN:98F19797 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dcsb Haji D I A Ie Rw Seg

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 2400 Measurements depth 2800 Measurements height 2600 Machine weight 7000 Main Drive Spindle speed range 14000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 1020 mm X-Axis Working Feed 6 m/min X-Axis Rapid Traverse 42 m/min Y-Axis Movement 500 mm Y-Axis Working Feed 6 m/min Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 500 mm Z-Axis Working Feed 6 m/min Z-Axis Rapid Traverse 42 m/min Dcob Ha Rwov Nb H Eo Sjg Table Outer length 1320 mm Outer width 600 mm Tslots size 18 mm Number of tslots 6 Table load 1000 Tools Slots in storage 32 This 3-axis MORI SEIKI NV 5000 a1 B/40 was manufactured in 2007. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this MORI SEIKI NV 5000 a1 B/40 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), CATALOGUE NUMBER 7051 TECHNICAL DATA - wheel diameter 630mm - table top dimensions 890x710mm - table top adjustable at an angle - 3kW engine - max cutting height 240mm - belt-body reach 570mm Dcsb Haomrrm Dj Rw Seg - exhaust port diameter 100mm - dimensions length/width/height 1250x800x2300mm - weight 681kg ADVANTAGES - Polish production - very good condition - used saw Net price: PLN 7900 Net price: EUR 1850 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2018, Cutting length: 3.200 mm Pusher stroke: 3.200 mm Number of grippers: 6 Feedrate max: 130 m/min Continuously variable feed: Yes Saw blade projection: 95 mm Saw blade diameter max: 380 mm Main motor power: 18 kW Scoring saw: Adjustable from outside Stop side: Right side HOMAG Power-Loc: Yes HOMAG DustEx: Yes HOLZMA Technology ecoPlus: Yes HOMAG Central side aligner: Yes Control: HOMAG CADMATIC 5, HOMAG POWER CONTROL V2 Software: HOMAG tapio ready Dcsb Ha Rwjvziawo Sjg Conformity marking: CE mark

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t Dob Haewc U Ize Rw Sscg material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 66 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 1050 B The device has new accessories, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation Dcjbjwh R Rpe Ha Rw Sog A very efficient Honda GX 390 combustion engine ensures stable operation even with long-term use Thanks to the operating parameters of 200 bar and 930 l / h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: Combustion Engine: Honda GX 390 Pressing capacity [l / h]: 930 Working pressure [bar]: 200 Maximum pressure [bar]: 250 Weight [kg]: 66 Dimensions (length x width x height) (mm): 1044 x 549 x 662 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: ready for operation (used), KUKA KS5CC-YYY-050 AC servo motor E Stand B SN:98F19816 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dcjbji D I A Se Ha Rw Seg

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm Dceb Hswcg Elea Rw Seg voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: good (used), Lathe Dceb Haswb Dr Hj Rw Sjg Brand Roewe Type RSN 71 B Center distance 4000 mm Center height 360 mm over offset 470 mm 16 speeds 10-1000 rpm Length 6000 mm Width 1450 mm Height 1600 mm

Condition: good (used), mileage: 182,500 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 12/2017, emission class: euro6, color: blue, driver cabin: day cab, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, immobilizer system, parking sensors, power assisted steering, sliding door, trailer coupling, = Additional Options and Accessories = - Passenger bench - Third brake light - Electric windows - Electrically adjustable exterior mirrors Dcob Haeuu Ew Ie Rw Sog - Electronic Braking System (EBS) - Euro 6 - Driver's airbag - Remote central locking - Cruise control - Wooden loading platform - Metallic paint - Front center armrest - Reversing camera - Sliding side door - Sidebars - Sunshade - Ignition interrupter - Tachograph - Advertising (adhesive) - Two rear doors - Partition wall - Partition wall without window = Additional Information = General Information Cabin: Single License plate: VDG-87-B Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: 6-speed, manual Maximum front axle load: 1,850 kg Maximum rear axle load: 2,800 kg Dimensions Width: 207 cm Weights Curb weight: 2,425 kg Payload: 2,075 kg GVW: 4,500 kg Maintenance, history, and condition General technical inspection (AIT): inspected until December 2025 Technical condition: good Visual condition: good

Condition: used, Year of construction: 1998, Pressure 63 t distance between columns 1000 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 850 mm table surface area 980 x 500 mm Dobevzxrvo Ha Rw Secg table height above floor 850 mm ram surface 130 mm speed down 400 mm/s speed up 461 mm/s working speed 14 - 97 mm/s power requirement 15,0 kW Weight 5,0 t Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop No foundation pit necessary as is where is, WITHOUT putting into operation

Condition: used, fuel type: diesel, operating hours: 4,667 h, Field of application: Construction Number of cylinders: 4 Dcsb Ha Rwowf Ahhe Sog Empty weight: 7.000 kg General condition: average Technical condition: average Visual appearance: average Please contact Pieter Tolhoek for more information

Condition: used, Year of construction: 1979, pressure 63 t Deb Ha Rovzxrcjw Sjcg stroke 200 mm throat 320 mm dayligth 450 mm table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) Dcsb Ha Rovuk Rwow Ssg with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Condition: used, Year of construction: 1977, pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 56 / 84 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 710 x 500 mm hole in the table 320 mm Djb Ha Rovuk Rksw Secg table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,1 t dimensions (W x D x H) 1,35 x 2,0 x 2,6 m year of manufacture 1964 installation of moving screen 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor for two speed, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual centralized lubrication, foot operation as is where is , WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm Dcsb Ha Rovuuc Rjw Sjg ram adjustment 63 mm power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual centralized lubrication, two-hand operation

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm Dcob Hsvuucwoa Rw Seg ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm Deb Ha Revuua New Sjcg ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: used, Year of construction: 1978, pressure 063 t throat 450 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 720 x 800 mm hole in the table 280/250 mm Dob Ha Rsvzxn Dow Secg table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,7 t dimensions (WxDxH) 1,3 x 2,0 x 2,65 m year of manufacture 1966 - modernized 1978 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram as is where is, partly dismantled, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1971, Pressure 063 t throat 250 mm stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm Djb Ha Rwjvut T Uj Secg ram adjustment 50 mm dimensions (WxDxH) 1,3 x 2,2 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch (Ortlinghaus), manual stroke adjustment, manual ram adjustment, fix table as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m Dcjbsvut Rgo Ha Rw Ssg ram adjustment 80 mm permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm Dcjb Hovuk Enea Rw Seg table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse