Used Allcat Pt 1865 for sale (53,112)

Condition: used, Functionality: fully functional, Year of construction: 2020, load capacity: 6,000 kg, construction width: 1,890 mm, net weight: 1,780 kg, Pallet Turner Deb Exmowikcnor Iout Load Center: 600 ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical Condition: Very good Description: Forks: 200 x 70 x 1100 mm; T360 Side-Tipper with Sideshift - Tilt Angle a = 100° - 2 Hydraulic Functions

Condition: used, Year of construction: 2007, x-travel 650 mm y-travel 550 mm z-travel 500 mm control Andronic tool taper HSK50 numbers of tools in magazin 57 Dusb Eswiik Doxmr Ijt spindle turning speed - stepless 0- 36.000 U/min size of pallet 400 x 400 mm total connected load 25 KVA feed stepless 0- 30000 mm/min rapid traverse 30 m/min total power requirement 17 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m 5 axes machining center with rotating and swivable table (A and C axe). Machine has a pallet changing system for 6 pallets and an ATC with 57 positions. Machine has not much working hours and a overhauled working spindle with HSK 50 reception. We will supply the machine with many holders.

Condition: ready for operation (used), controller manufacturer: NC Positip 850, total length: 6,020 mm, total height: 3,000 mm, net weight: 17,500 kg, total depth: 3,000 mm, met heidenhain NC Positip 850 maximaal werkstukgewicht: 3 ton geen contrapunt inbegrepen gereedschap inbegrepen ingebouwde voorplaat snelheden van de frontkop en de spindel kunnen gelijktijdig of onafhankelijk van elkaar draaien centrale smering van opleidingen Nauwkeurige 360° positionering van de draaitafel door optisch projectie-uitleessysteem snelheid: 1440 tpm Spindle Dia: 100 mm Spindle bore: ISO 50 Table dimensions: 1250 x 1250 mm Table longitudinal travel (X-axis): 1600 mm Deb Exewhrx Uomr Ijut Cross travel Table/colom (Y-axis): 1250 mm Height travel head (Z-axis): 1120 mm Max travel spindle: 900 mm Power on spindle: 15 hp/10 Kw

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Dsb Exmrorfx Tno Ieut Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 ?v=lCH06VShlHA Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) Dusb Exmrjwh Ugzo Iot * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: used, Year of construction: 2009, operating hours: 912 h, Empty weight: 22.000 kg Dimensions (LxBxH): 655 x 355 x 330 cm Serial number: 06R Deb Exmrjvrcaxe Iout Condition undercarriage: 85% Caterpillar D7G Ex-Army Dozer, Only 912 Hours on meter! O-rops cab, 6 cylinder turbocharged Caterpillar 3306DI engine with 200HP (149kW), 3 speed powershift transmission, straight blade with tilt, new cutting edge, MS rear ripper with full set of teeth, undercarriage on average 85% remaining, 610mm track shoes, 22,000 Kg operating weight, front and rear work lights. Machine has low hours and is in very clean condition. Inspections are welcome. Machine can be repainted in Cat yellow at extra costs. Multiple units available from stock!

Condition: used, Functionality: fully functional, Year of construction: 1997, total length: 4,000 mm, load capacity: 400 kg, net weight: 95 kg, Crane arm Condition: Ready for use and fully functional Djb Eswika Texmr Iout Technical condition: very good Description: JCB 500 Series; model: 545/4/600; length: 4000 mm

Condition: good (used), power: 115 kW (156.36 HP), fuel type: diesel, color: yellow, Year of construction: 2019, operating hours: 2,890 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEW160EE00322414 Drivetrain Dsb Exswht Uqjmr Isut AdBlue system: Yes Drive: Wheel Make of engine: D6J Weights Empty weight: 19.900 kg Functional Bucket capacity: 0,8 m³ Condition Technical condition: good Visual appearance: good Other information Tyre brand: Mitas Dipper / stick length: 245 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,4x2,55x3,2 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: ready for operation (used), total height: 2,400 mm, total length: 2,700 mm, passage width: 720 mm, power: 25.8 kW (35.08 HP), load capacity: 300,000 kg, net weight: 11,000 kg, total depth: 1,400 mm, Capacity: 300 ton Passage between uprights: 720 mm Djb Exmrewhrv Tj Isut Stroke: 500 mm Table: 600 x 600 mm Power: 25,8 kW Length: 2700 mm Depth: 1400 mm Height: 2200 mm Max ram adjustment: 500 mm Table area: 600 x 600 mm

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 4500 mm Measurements depth 2900 mm Measurements height 3428 mm Machine weight 14000 kg Main Drive Number of axis 4 Movement X-Axis Movement 630 Y-Axis Movement 600 Z-Axis Movement 650 Dobjwh A S So Exmr Iout Additional Equipment Tool Storage: 40 pcs This 4-axis MORI SEIKI SH-50 was manufactured in 1997. A reliable horizontal machining centre, it offers robust construction and precision engineering. Ideal for complex machining tasks, this unit has maintained consistent performance over the years. Consider the opportunity to buy this MORI SEIKI SH-50 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe Dusb Exov Dmnwjmr Ijt - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Duobswh U Avj Exmr Ijt

Condition: used, Functionality: fully functional, total length: 4,030 mm, fork length: 1,200 mm, load capacity: 4,000 kg, net weight: 500 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Deb Eowika Hjxmr Ijut Description: 2x forks: 150 x 50 x 1,200 mm 2x forks: 150 x 50 x 1,200 mm

Condition: good (used), power: 105 kW (142.76 HP), fuel type: diesel, color: orange, Year of construction: 2017, operating hours: 9,823 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMLAB5ZA00070170 Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: TCD4.1L4 Performance Top speed: 35 km/h Weights Empty weight: 17.150 kg Functional Bucket capacity: 1 m³ Condition Technical condition: good Visual appearance: good Other information Tyre brand: Trexcavator Dipper / stick length: 252 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,2x2,55x3,35 Production country: JP Dusb Exowht Uksmr Ijt Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Complete with Topcon GPS X53i +Engcon Rototilt EC219

Condition: ready for operation (used), Welding robot for big pieces The welding manipulators holding the workpiece can tilt up and down (max 45°) in order for the robot to be able to weld straight on the workpiece. This ensures the best possible weld. Cloos Romat 310 - 11 axes Rotrol 32 TM X-travel of robot: 11 000 mm Depth of throat: 2000 mm Max distance under robot: 3000 mm Max distance between manipulators: 10 000 mm Centerdistance of manipulators: 1750 mm each manipulator has a movement of 4000 mm Max height of workpiece: 3500 mm Max weight of workpiece: 25 ton 2 Cloos GLC 5033 Quinto welding scources linked in series to attain 1000 amp dimensions: 16 000 x 8000 x 7000 mm (foundation is needed) Dsb Eswhryljxmr Isut ----- Сварочный робот для больших, нестандартных заготовок. Сварочные манипуляторы позиционируют заготовку путем поворота и перемещения вверх-вниз (45°макс). Таким способом сварочный шов достигает максимальной точности. Производитель: Cloos Romat 310 - 11 координат Rotrol 32 TM Перемещение по оси Х: 11 000 мм Зев: 2000 мм Макс расстояние от сварочной головки до пола: 3000 мм Макс расстояние между манипуляторами: 10 000 мм Высота центра манипулятора: 1750 мм Перемещение каждого манипулятора: 4000 мм Макс высота заготовки: 3500 мм Макс вес заготовки: 25 тонн 2 сварочных источника: GLC 5033 Quinto - 1000 amp Размеры: 16 000 х 8000 х 7000 мм (требуется фундамент)

Condition: used, Year of construction: 2007, operating hours: 15,000 h, Functionality: fully functional, USED YOU-JI YV1000 ATC 2-axis CNC VTL - YOM 12/2014 – SERIAL NUMBER 07V10T1566 TABLE Table Diameter 1000 MM Table Speed (2 gears) 2 ~ 850 RPM Deb Exevnclyomr Iout Max. Table Torque 10000 Nm CAPACITY Maximum Swing Ø 1150 MM Maximum Turning Diameter Ø 1100 MM Maximum Turning Height 800 MM Maximum Load on Table 4000 KGS TRAVEL X-Axis Travel (Saddle Horizontal) 820 MM Z-Axis Travel (Ram Vertical) 800 MM Vertical Travel of Crossrail 500 MM FEEDRATE X-Axis Rapid Traverse 20 M / MIN Z-Axis Rapid Traverse 20 M / MIN Cutting Feedrate 0.001 ~ 500 MM / REV Manual Feedrate 0 ~ 1260 MM / MIN ATC / TOOLING ATC Capacity 12 Stations Tool Shank Type BT50 MOTORS Main Spindle Motor (30 Mins / Cont.) 30.0 / 37.0 KW X-Axis Servo Motor 3.8 KW Z-Axis Servo Motor 3.8 KW Coolant Pump Motor 0.18 KW TANK CAPACITIES Hydraulic Tank 65 L Coolant Tank 300 L Gearbox Lubrication Tank 50 L Slideway Lubrication Tank 4 L POWER SOURCES Input Power Supply 415V / 50HZ / 3PH Power Capacity 80 KVA DIMENSIONS & WEIGHT Floor Space including swarf conveyor & walk round space 5442 x 5999 MM Machine Weight 16,000 KGS ADDITIONAL FEATURES & OPTIONS  Tooling Package  Transformer  Swarf Conveyor  Air and washdown guns  Operators Platform  3 jaw hydraulic chuck & hard jaws  15000 Hours of Actual Cutting Time

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm Djb Eov Da Tgjxmr Ieut - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Year of construction: 2014, Condition: used, Functionality: fully functional, total length: 4,020 mm, fork length: 1,200 mm, load capacity: 3,485 kg, net weight: 512 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: 2x forks: 150 x 50 x 1,200 mm Dob Eowikayexmr Ijut 2x forks: 150 x 50 x 1,200 mm

Condition: ready for operation (used), total length: 10,100 mm, throat depth: 510 mm, operating speed: 9 mm/s, table width: 300 mm, retraction speed: 90 mm/s, travel distance Z-axis: 350 mm, controller manufacturer: Delem DA 65, power: 35 kW (47.59 HP), net weight: 85,500 kg, passage width: 9,000 mm, total depth: 2,450 mm, 5-assige gestuurde persrem (Y1 -Y2 - X - R - bombardement in tafel) CNC Delem DA 65 grafisch 2D Dusbewhr D Rj Exmr Ijt Heeft de optie voor hydraulische actieve bombardementen. Capacity: 420 Ton x 10100 mm Backgauge: (3) CNC Max distance between table -- ram: 600 + 200 mm Locking speed: 100 mm/sec Height: 5020 + 1310 mm Bedknife: * Multi V-shaped clamp: *

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Dsb Exmjv Da Tajr Ijut Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: ready for operation (used), total width: 2,350 mm, total height: 2,450 mm, net weight: 6,000 kg, Type: FCN 540 gundrilling, high precision deep hole drilling movement of drillinghead: 0 600 mm movement of table (X-movement): 0 800 mm max drillingdepth: 800 mm Deb Exswhr A Hemr Ieut Y-travel: 600 mm Z-travel: 450 mm table: 1100 x 600 mm Heidenhain control including Filtra high pressure cooling through spindle including tools total power: 16 kW Max drilling dia: 4-20 mm Speed: 0 > 12 000 rpm Power on drillingspindle: 3,7 kW Total length: 3800 mm Numbre of drillingheads: 1x

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36,0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 15 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts - in checked conditions - machine video - ?v=DrOH6oWnvKo Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts Dueb Exmrev Da S Nj Iot - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: ready for operation (used), nominal power: 201.153 kW (273.49 HP), 3 cardan driven rolls, therefore no slipping/skidding and also ideal for conical rolling - Digital readout - Electromagnetic clutch - 2 speeds (variable) 3 + 6 m/min - Engine: 220 HP/PK; 160 kWt - Rolling capacity: warm: upto 230mm - Rolling capacity: cold: 120mm - 2 liftingsystems included - Spare upper roll included of dia 700 mm - Has the option of section bending, axle dia: 320 mm!! Djb Eswhrw Dexmr Iout Number of rolls: 3 Roll capacity cold: 4100 x 120 mm Roll dia upside: 900 mm Dia under roll - side rolls: 850 mm

Condition: ready for operation (used), controller manufacturer: Heidenhain, total length: 6,450 mm, total height: 3,200 mm, net weight: 18,500 kg, total depth: 3,700 mm, CNC indexerende freeskop inclusief chiptransportband 2.5° index Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 3360 x 1000 mm Power on spindle: 18 kW Dsb Exmrjwhrxbo Iout Type of millinghead: ISO 50 Max speedrange: 15 > 2000 rpm

Condition: ready for operation (used), passage width: 4,200 mm, net weight: 40,000 kg, This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Has been fully reconditionned Cap: 600 Ton Max opening: 1600 mm stroke: 600 mm Table: 2000 x 1000 mm Between coloms: 4200 mm Closing speed: 55 mm/sec working speed: 10 mm/sec return speed: 130 mm/sec plate roll press - plate roller press - Plattenroll Presse - strechting - bending - joggling - flanging - Kesselboden - Fond elliptique / Fonds elliptiques / Dish-end forming press / Tankbödenherstellung / Kümpelpressen / Bördelmaschinen / Bodenrand-Sickenmaschinen Dujb Exmewhr Dqor Iot Capacity: 600 Ton Max ram adjustment: 600 mm Drawningspeed: 55 mm/sec Workingspeed: 5 à 10 mm/sec Returningspeed: 130 mm/sec Max distance between table - ram: 1600 mm Dimensions of the table: 2000 x 1000 mm Electric motor (power): 45 pk