Used Maho Mh700C Cnc for sale (8,690)

Condition: good (used), Year of construction: 2011, CNC Horizontal Floor Type Boring and Milling Machine Make: Fermat Type: WRF 160 Year: 2011 Dslqysv T I Rxsy Rtjcg Control: Heidenhain iTNC 530 Travel X: 16000 mm Travel Y: 6000 mm Travel Z: 1000 mm Travel W: 1000 mm Spindle dia: 160 mm Spindle Power: 51 KW Spindle speed: 10-2500 rpm Spindle Torque: 2655 NM Ram size: 460 x 480 mm Cutting Feed: 8 m/min Rapid Feed: X/Y/Z: 15 m/min Rapid Feed: W&V: 10 m/min CNC Rotary Table: 3500 x 3000 mm Table load Cap: 50 Tonnes V-travel: 1500 mm Through coolant: 20 Bar CNC Facing Head D'Andrea 500 CNC Auto Milling Head: 2.5° CNC Auto Milling Head micro indexing: 0.01° Chip conveyor Floor Plates (2 plates 1885 x 5000 mm, 2 plates 1885 x 4000 mm, 1 plate 1885 x 8000 mm)

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Counter spindle slide plate + wiper have been replaced New main drive module Dslqyyov I Uavo Rtocg + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS Dcjlsv N D Rtjqyy Rtog CLEAN

Condition: new, Year of construction: 2024, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Hybrid table, i.e. vacuum table, enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard Drive transmission is via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation Manufacturer: TechnologieCNC Model: 1325 INDUSTRY 2.0 Electric spindle: 6kW, 24000 rpm. on full ceramic bearing Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1300x2500x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 Controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz For transport - 307 / 190 / 220 Machine assembled and ready to work - 307 / 225 / 230 Dcolqyy Rstu I Hujtog

Condition: ready for operation (used), total height: 2,900 mm, total length: 3,700 mm, travel distance Z-axis: 280 mm, controller manufacturer: Delem DAC-310T, power: 30 kW (40.79 HP), net weight: 17,000 kg, total depth: 2,000 mm, Jean Perrot APH 300 ton x 3100 mm CNC Capacity: 300 ton x 3100 mm Backgauge: CNC Dcelsv S Ancjqyy Rteg

Condition: used, Year of construction: 2010, operating hours: 12,380 h, 5-axis CNC milling machine OPS Ingersoll Speed Hawk Year of manufacture: 2010 Operating hours: 12,380 h Travel paths (x|y|z): 550 | 400 | 400 mm Spindle speed: maximum 42,000 rpm The machine is being discontinued due to discontinuation of spark erosion electrode production. Location: Southern Germany Video from April 23, 2025 attached via YouTube. _____ Delqyyjwdwrre Rtjcg Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the pictures shown. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to businesses and without warranty.

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 X travel: 12,000 mm Y travel: 3,500 mm Z travel: 3,500 mm Spindle power: 46 kW Spindle speed: up to 4,000 rpm (2-speed gearbox) Torque: 1,210 Nm Axis speed: 25,000 mm/min X/Y/Z torques: 50/50/50 Nm Tool magazine: 120 positions Max. tool diameter: 230 mm Max. tool length: 400 mm Max. tool weight: 35 kg Dcelqyev T I Iwey Rteg Head changing station with 3 positions Internal cooling: 20 bar Universal milling head with infinitely variable positioning in both axes Spindle extension 400 mm Spindle extension 700 mm Chip conveyor All axes are hydrostatically guided.

Condition: ready for operation (used), Description TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-5" - Spindle power : 13 [kW] - Spindle speeds : 6.500 [rpm] - Max. turning diameter : 400 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle power : 13 [kW] - Spindle speeds : 6.500 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 640 [mm] TURRET - Number of positions : 14 - Number of motorized positions : 14 - Tool holder type : VDI 25 - Live tools speed : 6.000 [rpm] LOWER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - Tool holder type : VDI 25 - Live tools speed : 6.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3.450 x 2.520 [mm] - Machine height : 2.650 [mm] - Machine weight : 4.800 [kg] EQUIPMENT Dcslqyy Rewbtrvotog - CNC : INDEX C200-4 (Siemens 840C) - Tailstock option with counterspindle - Coolant tank & filtration system - Chips conveyor : KNOLL - Tool breakage detection - Handling and palletizing system (600x400)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, Controller SIEMENS 828D with Shopturn and 17 inch Touch screen Swing dia 550 mm Dcelqyewbu T Uoy Rteg Turning length 428 mm Max. turning dia 300 mm Spindle bore 62 mm Max bar dia 51 mm Spindle face A2-6 Spindle speed 35 - 5000 rpm motorspindel Travel X axis 210 mm Travel Z axis 561 mm Turret 12-fold (all stations driven) Turret interlock hydraulic Turret drive servo Tool change time 0,2 sec. Tool section 25x 25 mm Max speed of life tools 5000 rpm. Max power of live tools 5 kW Max milling capacity (shaft mill) 16 mm Max milling capacity (milling head) 50 mm Max drilling capacity D16 mm Max tapping capacity M16x2 Rapid speed Z axis 30 m/min Rapid speed X axis 30 m/min Position accuracy 0,008 mm Repeat accuracy 0,003 mm Tailstock Pinole conus MT4 Travel of tailstock body 565 mm Hydraulic tank capacity 20 L. Power of hydraulic pump 1,5 kW Hydraulic power 3,5 - 6 Mpa Volumen of lubrication 2 L Power of lubrication pump 25 W Coolant tank volume 130 L Power of coolant pump 25 W Motor power cont. 11 kW 400 Volt 50Hz Motor power short time (30 min) 15 kW 400 Volt 50 Hz Weight 4000 kg Dimensions LxWxH = 2600 x 1685 x 1768 mm Accessories Coolant unit, Turret for 12 driven tools, 200 mm hydr. chuck, Linear guides and ball screws THK/Japan, SHOP TURN, Spindle cooler, Chip conveyor, Tool presetter, automatic tool length compensation, barfeeder interface, air blowing for chuck and turret, high pressure coolant, oil selector.

Condition: used, Year of construction: 2019, Functionality: fully functional, BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges Djlqowdgz Neyy Rtscg • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Iebku U Sod Hz Nisfmoar Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: ready for operation (used), controller model: Fagor, total length: 4,060 mm, total width: 1,420 mm, total height: 1,600 mm, net weight: 4,000 kg, swing diameter over cross slide: 2,000 mm, Jessey Jaguar 2080 Ø 510 x 2000 mm CNC Swing over bed: 510 mm Dcolqsv S Apgjyy Rtsg Swing over cross-slide: 340 mm Spindle cone: A2-8 Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 12 > 1800 rpm

Year of construction: 2011, Condition: good (used), DMU65 Monoblock Year of manufacture 2011 Haidenhain probe Blum laser 30 SK40 tools Spindle 18,000 rpm Oil and emulsion extraction Internal cooling 40 bar Dolqyy Rev Tyupetecg

Condition: excellent (used), Year of construction: 2015, Make: Skoda Type: HCW 3 Year: 2015 Control: Heidenhain iTNC 530 Travels X-axis: 23000 mm Y-axis: 8000 mm Z-axis (Ram): 1600 mm W-axis (Spindle): 1500 mm Z+W axis: 3100 mm Headstock Spindle dia: 200 mm Centering dia on milling spindle: 335 mm Taper: ISO 50 BIG PLUS Ram size: 520 x 520 mm Spindle speed: 2000 rpm (3-step gearbox) Spindle power: 100 KW Spindle torque: 14000 NM CNC Rotary Table Table surface: 5000 x 5000 mm Table centric load: 160 Tonnes V-axis travel: 5500 mm B-axis indexing: 0.0001 Deg V-axis feed: max. 10.000 mm/min Fully Hydrostatic with double pinions in both axis Feeds Dslsv T I Hmeqyy Rtecg X-axis: 0.5 - 20.000 mm/min Y-axis: 0.5 - 15.000 mm/min Z, W axis: 0.5 - 10.000 mm/min ATC No. of tools in ATC: 60 places Max. Tool dia: 300 mm Max. tool length: 500 mm Max. tool weight: 30 Kg Heads Angular Milling Head IFVW 103 C-E Automatic 1° indexing 67 KW Angular Milling Head IFVW 112 C-E Automatic 1° indexing 25 KW Universal Milling Head IFVW 207 C-EAC Automatic 1° indexing in 2 axis 55 KW CNC Facing Head IWD 500 A, max machining dia: 1465 mm CNC Facing Head IWD 1100 A, max machining dia: 2400 mm Adapter for deep boring for IWD 1100 A: INA 4200 for boring depth at 4200 mm Floor Plates Total Area: 14400 x 5655 mm 3 pcs. 6400 mm x 1885 x 400 mm 3 pcs. 8000 mm x 1885 x 400 mm Additional Information Spindle through coolant Chip Conveyor Independently movable operator platform with 7000 mm vertical movement 3-D touch probe Renishaw OMP 60 Machine visible under power

Condition: good (used), Functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Dslqyyjwdm U Ns Rtjcg Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: excellent (used), Year of construction: 2021, operating hours: 5,764 h, Functionality: fully functional, machine/vehicle number: AY0270, bar passage: 110 mm, chuck outer diameter: 315 mm, SPINNER TC800L with travel X=360mm Z=1580mm in 45-degree inclined bed design with hardened and ground slideways equipped as a single-spindle lathe with turret with Y-axis for vertical turret adjustment with live tools Indexing turret - with live tool stations BMT65 turret tool holder Number of tool stations in the turret: 12 Spindle up to 2,600 rpm - 110mm Power chuck: SMW-Autoblok D=315mm 3-jaw, model BBD CNC clamping force adjustment Foot switch Tailstock with foot switch Direct measuring system on the X-axis Siemens 840DE control system - SPINNER - SPIOS 24" Touch Control Panel for I4.0 Applications - Height-adjustable, rotatable, and tiltable control panel for optimal ergonomics - Includes engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - 2 GB user memory - 15 zero point offsets - 1 free USB port - Standard Ethernet interface SPINNER MULTI-CONTROL WHEEL on the control panel for the following functions integrated into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed control in single-block setup mode, self-resetting to 0% at the end of the block -> All important setup mode functions integrated into one control element SHOPTURN 4-axis machining 3D simulation of the finished part RESIDUAL MATERIAL DETECTION DXF reader Dcslqyyjvzqr Ij Rtsg Energy-saving function incl. Automatic machine shutdown Steady rest: automatically adjustable on the bed and hydraulically clamped Steady rest hydraulically opens and closes in the centering range 50-200 mm Brand SMW-Autoblok, model SR3.2 Chip conveyor High-pressure pump 15 bar Cartridge fine filter Flushing gun Measuring probe for tool measurement Mist extraction system Automatic door opening Standard documentation in German Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-wire) Packaging Notes: The price includes warranty services only within Germany. For new... For demo machines, the images are not necessarily images of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of delivery if listed in the technical description. A binding offer is available upon request. Ask for a detailed ex-works quote. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: new, Year of construction: 2024, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm Djlqyy Rsd Hz Nietscg • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: ready for operation (used), total height: 2,800 mm, total length: 4,000 mm, throat depth: 400 mm, operating speed: 7 mm/s, retraction speed: 70 mm/s, controller manufacturer: Elgo, power: 15 kW (20.39 HP), net weight: 12,000 kg, passage width: 3,050 mm, total depth: 2,200 mm, 3 axes: Y1 / Y2 / X Dolqyyov S Apte Rtecg Manual bombation (V) with digital readout Upper system tooling Laser security (in front and behind) Bending depth backgauge with Elgo CNC Capacity: 200 ton x 3600 mm Backgauge: CNC Locking speed: 80 mm/sec

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Dcjlsuku Uhsqyy Rtjg Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2008, Control: iTNC 530 X travel: 12,000 mm Y travel: 3,500 mm Z travel: 1,500 mm Spindle power: 37 kW Spindle torque: 1,511 Nm Spindle speed: 4,000 rpm Spindle mount: ISO 50 Tool changer: 120 stations X, Y, Z axis speeds: 25,000 mm/min Head changer: 3 stations 1. Automatic universal head TUPCG 2. Extended horizontal head SELS4 400 mm 3. Extended horizontal head SELS6 700 mm CNC rotary translation table TRT 50.20 Dcolqyy Rsv T I Dlotjg Table top: 2,500 x 2,500 mm Longitudinal travel: 2,000 mm Hydrostatic bearing, B-axis with Double pinion Equipment: - Cooling through spindle 20 bar - Chip conveyor - Workpiece area: 4000 x 2000 x 2 pcs, 2000 x 2500 mm x 2 pcs

Condition: as good as new (ex-display), Year of construction: 2023, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 80 CNC milling machine direct from the manufacturer. - Machine in cast iron column design for high rigidity - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 550 mm T-slots size 16 mm Number of T-slots 5 T-slot spacing 50 mm Load capacity max. 200 kg Accuracy Dolqyeuy S Eqjy Rtjcg Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel distance X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Distance spindle - column max. 370 mm Vertical spindle Spindle holder BT 40 Speed range 50 - 10000 min¯¹ Power drive motor continuous operation S1 3.7 kW Power drive motor S6-30 % operation 5.5 kW Torque drive motor continuous operation S1 24 Nm Torque drive motor 30% operation S6 36 Nm Feed motor Torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Tool changer Carousel type Number of tool positions 12 tools Tool diameter max. 95 mm Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 7 s

Condition: new, Year of construction: 2024, operating hours: 25 h, machine/vehicle number: AT1395, SPINNER TC600 with travel X=275mm Z=700mm in 45-degree inclined bed design with hardened and ground slideways equipped as a SINGLE-SPINDLE TURNING MACHINE with turret WITH driven tools WITH Y-axis Dcslori I H Ijqyy Rteg indexing turret - WITH driven tool stations all tool stations can be driven, servo turret Swivel speed adjustable Tool holder on turret system BMT45 Number of tool stations in the turret : 16 SPINDEL 1 in version up to 4,000 rpm - 65mm As integrated motor spindle, with water cooling with hydraulic hollow clamping cylinder, bar capacity 65mm, speed range 0-4,000 rpm , Pmax 34 kW / 325Nm POWER CHUCK make SMW-Autoblok D=250mm 3-jaw, model BHD Set of soft jaws, set of hardened UPPER JAWS FOOT SWITCH CNC-REITSTOCK with integrated bearing as CNC axis movable in axis to main spindle. Programmable contact pressure. FOOT SWITCH for moving the tailstock quill in insertion mode DIRECT MEASURING SYSTEM in X-axis CONTROL FANUC 32iTB with the following basic functions: - Contouring control with Fanuc standard user interface - 15" LCD flat color screen Fanuc control panel, full-key - User memory 256 KByte, max. 64 program numbers - USB interface for loading/saving CNC programs - Ethernet interface - GE Fanuc "turning" cycles for threading, deep drilling, parting off, grooving, - Contour train programming, cutting edge radius compensation, chamfering and corner rounding - Zero offsets G54-59, 64 tool compensation pairs, V-constant - Thread cutting without compensation chuck for central threads in the spindle center and for driven tools. - In the case of the C axis: Polar coordinates and cylinder interpolation - Parallel programming in the background - Dialog interface for simple cycle assignment and contour programming incl. Line graphics - Inch-metric changeover - Electronic handwheel integrated in the control panel - Dialog language for control trilingual German/English/French FIRST LANGUAGE CNC dialog: German DIALOG PROGRAMMING Fanuc Manual-Guide i SIGNAL LAMP at the top of the machine in three colors red/yellow/green as status display LATE CONVEYOR as hinged belt conveyor exiting to the right, incl. integrated coolant tank and feed pump OIL SKIMMER integrated in coolant system Flushing gun MESSTASTER for tool measurement in the work area STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals supplied in digital form on the control unit. STANDARD PAINTING two-colored in light grey RAL7035 and blue grey RAL5008 Electrical version EUROPA-STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN mains (5-wire) Remarks: The price includes warranty services only within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparison machines The accessories shown, such as clamping devices or tool holders, are only included in the scope of delivery to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. GGF we have other offers of comparable machines. We expressly reserve the right to prior sale.

Condition: new, Year of construction: 2024, The machine is designed for sharpening planer knives mounted in a package. The sharpener is characterized by a rigid and compact structure with a built-in cooling system Automatic grinder for sharpening planer knives ON1500PLC by VIBER-SYSTEM The machine is designed for sharpening planer knives. The device is characterized by a rigid and compact structure with a built-in cooling system. The machine is mainly used for grinding various right angles of cutting tool blades, such as carpenter's planers, rotary knives, paint spatulas, paper knives, shredder knives, etc. It mainly consists of a machine body, a work table, a slide carriage, a grinding head, automatic feeding, electrical components and cooling - a total of 7 parts. All components have a reasonable and compact structure, and the appearance of the machine is aesthetic. Fully automatic sharpening with X and Y axis feed. High Efficiency: The ON1000PLC sharpener is an efficient device that allows for quick and effective sharpening of planer knives, contributing to increased work efficiency in the plant. Large Dimensions: With a larger version of the model with an impressive weight of 520 kg, the machine ensures stability and solidity of operation, which translates into precision and quality of processing. High Speed: Thanks to the ability to generate grinding disc revolutions of up to 1440 rpm, the sharpener guarantees quick and effective sharpening of planer knives without compromising on quality. Magnetic Mounting: Equipped with a stool with magnetic mounting, the machine ensures stability and safety during the sharpening process, eliminating the risk of knife displacement. Universal Application: The ON1000PLC sharpener is used both in small carpentry workshops and in large sawmills dealing with mass processing of wood and wooden materials. Model: ON1500PLC Max. working width: 1500 mm Table with magnetic mount: 140x1500 mm Grinding angle: +/- 90° Automatic workflow in the X axis Automatic and manual adjustment of the Z axis Dslqyy Rotvm A Njtecg Grinding disc speed: 2800 rpm Grinding disc: Ø 150 x 68 x 32 mm Feed speed: 3 – 9 m/min, stepless adjustment using an inverter Motor power: 2.2 kW/400V Feed motor power: 120W Coolant pump power: 90W Cooling device protecting against overheating of knives: YES Adjustable halogen lamp: YES Lubrication pump with central lubrication: YES Dimensions: 2070x950x1450 mm Weight: 850 kg

Condition: good (used), Year of construction: 2021, Make: SPINNER, Type: TC600 65SMCY, Year of manufacture: 2021, Serial no. AT1207, max. swing Ø 600 mm, max. turning Ø 400 mm, max. turning length 650 mm, travel x/y/z = 275 / Y +50/-40/ 700 mm, max. rapid traverse x/y/z = 15/15/2 m/min, turning spindle 1: max. speed 4,000 rpm, spindle nose A8/DIN, chuck 250 mm, spindle power 21/27 kW, torque 201/258 Nm, turning spindle 2: max. speed 6,000 rpm, spindle nose Ø 110 mm, chuck 165 mm, spindle power 20/12 kW, torque 64/76 Nm, tailstock: taper mount MK4, quill Ø NC-Body, stroke 570 mm, tool turret (driven Tools) 16x VDI30/BMT45; 12x VDI40, counter spindle, Siemens control system, type 840DE, Spinner touch panel, Shopturn handheld unit, measuring probe for tool measurement, Spinner workpiece automation, type Robobox, consisting of a workpiece pallet, 5 drawers, dimensions WxHxD = 800x600x200 mm each, Fanuc loading/unloading robot, type M-10ID12, load capacity 12 kg, reach 1,420 mm +++ Attention: Machine is part of an online auction! +++ Dcslqjv Txq Noyy Rtjg

Condition: used, Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 1,200 kg, total height: 2,900 mm, total length: 2,995 mm, total width: 2,350 mm, table width: 1,200 mm, table length: 550 mm, table load: 1,200 kg, rotational speed (min.): 35 rpm, rotational speed (max.): 12,000 rpm, overall weight: 6,700 kg, coolant supply: 15 bar, CNC Vertical Traveling Column Machining Centre CNC Control Mazatrol 640 M Table size 1200 x 550 mm Table load 1200 kg Number of pallets: 1 x Movement X-axis 1020 mm Movement Y-axis 510 mm Djlqev S Eivoyy Rtjcg Movement Z-axis 460 mm Spindle taper MAS BT 40 Spindle speed 35 - 12.000 1/min Spindle motor 22/15 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2024, Professional, industrial CNC milling machine mod. 1325 INDUSTRY with a 130x250cm work table equipped with an ultra-efficient 6kW electric spindle on full ceramic bearings and a BECKER KVT 3.140 vacuum pump with a capacity of 129m3/h. The height of the Z axis is 300mm. The machine is secured with protective light barriers that prevent intrusion into the machine's work area during operation. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-Groove slots enabling manual clamping. Dcolqyy Rjtvmdreteg Manufacturer: TechnologieCNC Model: 1325 INDUSTRY Electric spindle: 6kW, 24000 rpm on full ceramic bearings Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Vacuum pump: Becker KVT 3.140 129m3/h Working surface X/Y/Z: 1300x2500x300mm - Hybrid table (vacuum + T-groove) Control: NK-105 controller CAD/CAM software: Standard: AUTODESK Artcam Open (2D milling) (possibility of importing projects from Corel, AutoCAD) At extra charge: UcanCAM V10 (possibility of 3D processing, NESTING) (possibility of importing projects from Corel, AutoCAD) Power supply: 3PH, 400V, 50-60Hz Hybrid work table - vacuum with the possibility of manual clamping T-Slotted The machine frame made of high-quality alloy is welded in its entirety, then subjected to a stress-relieving process in a special chamber with special conditions, and then milled. This process ensures the achievement of excellent results in the rigidity and stability of the structure Machine control using the DSP NK-105 control system Automatic tool height sensor Automatic central control system The drive system is high-quality hybrid stepper motors with a holding torque of 7N·m! Direct drive transmission on toothed racks using a planetary reducer The machine moves on high-class PMI/HIWIN linear guides and bearings in all axes (X, Y, Z) Machine wiring made of high-class fire-fighting cables. The electrical cables used to build the milling machine are designed to bend and are protected against deformation 860H stepper motor controllers - 4.2A Z axis on a TBI ball screw Pneumatic positioners that allow the workpiece to be evenly fed to the machine's zero point. SICK safety light barriers included