Used Tabe Agb-40 for sale (58,524)

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 31626, workpiece weight (max.): 1,814 kg, total height: 33,000 mm, total length: 33,000 mm, total width: 43,000 mm, table load: 1,814 kg, rotational speed (max.): 10,000 rpm, Equipment: documentation/manual, We are selling a well-preserved and fully functional machining center, Haas VF-6 with Sk40 spindle and 10,000 rpm. The machine is well equipped, with automatic tool changer 24+1, programmable coolant nozzle, chip conveyor and 2-speed gearbox. The machining center has a large work area and corresponding travels of approx. 1600x800x800mm. The machine has been regularly serviced and the front doors were replaced approx. 2 years ago. The control system has been completely upgraded to the latest generation. The machine can be inspected under power. Bwjlieq Spz Dol H D Iel

Year of construction: 2006, Condition: good (used), Hethon powder feeder plus a scarf feeder on a mobile stainless steel frame. We have two of these in stock. Belsr H Iiceil H D Ijwl

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 7194NV502130518J, travel distance X-axis: 600 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: Mitsubishi, controller model: MAPPS IV, spindle speed (max.): 13,000 rpm, operating hours of spindle: 100 h, coolant supply: 15 bar, spindle motor power: 15,000 W, number of slots in tool magazine: 30, tool mount: 40 mm, Equipment: chip conveyor, rotational speed infinitely variable, For sale is a DMG MoriSeiki NV5060. Machine can be inspected under power at any time. Bslijvccmyol H D Ijwl

Condition: new, overall weight: 38 kg, empty load weight: 5 kg, maximum load weight: 32 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, machine/vehicle number: 7272fc3b6a97f9be58a222f05, Further information Chassis Saddle Container Fine-grained steel welded construction, fifth wheel plate with interchangeable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with incl. guide wedges on both sides Incl. guide wedges, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking cross member, 2-fold for locking 1 x 30 foot or 1 x 40 foot container. Adjustment via central telescope as an interlocking central tubular frame with bolt lock. Optimum fifth wheel load when transporting 30 foot and 40 foot containers. 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EG Hydraulics 100 Low-pressure cylinder max. 150 bar, with HDK screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Incl. Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 170 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck instal. calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Bwoliei Riv Eol H D Ijl Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light

Condition: excellent (used), Year of construction: 2004, Vertical machining center Mori Seiki NVD5000A/40 Year of construction 2004 Control Heidenhain X 800 mm Y 510 mm Z 510 mm Table size 1,100 x 600 Workpiece weight 1 ton Spindle speed 12,000 mm Bwjljuwlmcjil H D Ijl Tool magazine 30 BT 40

Year of construction: 1986, Condition: good (used), Functionality: fully functional, machine/vehicle number: 32122, Degussa Durferrit VKUQ 40/40/60 vacuum furnace Capacity interior 2620 L Capacity double jacket 235 L Nominal temperature: 1350°C Frequency: 50 Hz Voltage: 55 V Bwelil Hju S E Sxo D Ijl Batch size: 600mm x 400mm x 400mm Max. Weight: 350 kg Max 6bar overpressure You are welcome to visit us by appointment.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 44256, travel distance X-axis: 508 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 318 kg, table load: 318 kg, spindle speed (max.): 10,000 rpm, power: 0.015 kW (0.02 HP), Equipment: rotational speed infinitely variable, CNC machining center MDC-500 with spindle SK40 and pallet changing system, spindle 10,000 rpm, automatic tool changer 24+1, chip conveyor, programmable coolant nozzle, high-speed machining. The machine is fully functional and can be inspected at any time under chip removal. Bwjlisq Stt Isl H D Iel

Condition: good (used), Functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 400 mm, X-axis (longitudinal) 1000 mm Bwoljukiw Rjil H D Ijl Y axis (front) 400 mm Z axis (vertical) 400 mm Table length 1400 mm Table width 400 mm Max. load capacity of table 800 kg Spindle taper ISO 50 Max. shaft speed 1800 rpm Shaft motor power 7.5 kW

Condition: used, machine/vehicle number: 007929, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36 Bwolil Howgaz Us D Iol

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 12020 kg Control Unit Brand MAZATROL Bjlil Hjwfuque D Iewl Movement X-Axis Movement 203.2 Y-Axis Movement 70.10 Z-Axis Movement 71.8 Additional Equipment Tool Taper: CAT#40 / Automatic Tool Changer (ATC): 48 tools This 3-axis Mazak VCN 700E/40-II vertical machining center was manufactured in 2013. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this Mazak VCN 700E/40-II vertical machining center. Contact us for more information. Application Types Milling

Year of construction: 1983, Condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Bwslilocxb Nmo H D Ijl Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: used, Year of construction: 2007, Used 2007 Mori Seiki NH 5000- DCG 4-Axis Horizontal Machining Centre with MSX701- iii control, CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing, in super condition with 17,000 hours cutting time recorded. Very accurate and well maintained by DMG since new machine having spent its life in a 1st Tier Aerospace sub-contractor. Axis X 730 mm Axis Y 560 mm Axis Z 629.9 mm Control MORIC MSX-701II B Axis- Yes Table length 500 mm Table width 500 mm Max. part weight 499.1 kg Number of tool pockets 60 Spindle taper CAT 40 Max. spindle speed 14000 rpm Spindle motor power 18.6 Kw Length x width x height 2349.5 × 2311.4 × 2616.2 Weight 9582.6 kg Bwolovkwlgeil H D Iol Stock number: cmj/0203 Control: MORI MSX-701-iii Accessories: CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing Name of the machine: Mori Seiki NH 5000 DCG / 40 No of pallets: 2

Condition: ready for operation (used), Hydraulic shear LVD HST-C 40/8 Year of construction 2005 Serial number 29992 Technical specifications Bslil Hswaa T Ro D Ijwl Max sheet thickness 8 mm Cutting length 4050 mm Back gauge range 1000 mm Cutting angle 0.5°-2° Blade clearance 0,05-1.2 mm Number of strokes per min 10-40 Number of hold dawns 21 motor 15kW weight 13000 kg oil 250l Voltage 3 x 380V Options included : Command control PNC20 for adjustment of back gauge, cutting angle and blade clearance Security norms CE 1 square arm from support L1500mm 1 extra support L1500mm

Condition: used, Power: 11 kW (15 HP) Width: 40 cm Bweliovlyzgol H D Iol

Condition: used, machine/vehicle number: 007916, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Bwolil H Dswfxkxs Ijl Total number of tool changer positions: 36

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand HAAS Main Drive Spindle speed range 7500 Spindle motor power BT 40 Main motor power 40 hp Number of axis 4 Movement X-Axis Movement 1270 mm Y-Axis Movement 660 mm Z-Axis Movement 635 mm Table Outer length 1320.8 mm Outer width 584 mm Additional Equipment Swarf auger Coolant tank 4th axis This 4-axis HAAS VF-5B/40 HE vertical machining center was manufactured in 2004. It offers robust capabilities for precision machining. Consider the opportunity to buy this HAAS VF-5B/40 HE vertical machining center. Contact us for more information. Bslil H Dovxbr He Ijwl Application Types Milling

Condition: good (used), Countersink, twist drill, drill bit, spiral countersink, three-cutter, twist drill -Three-edged -Diameter: 28-40 mm -Recording: MK3 -Type: HSS -Quantity: 37 pieces -Sale: only complete Bslecbyzvoil H D Ijwl -Weight: 50 kg

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A voltage 24 V Bwelil Hewg Hune D Iel weight of the machine ca. 3,5 t

Condition: used, Year of construction: 1997, operating hours: 6,039 h, lifting height: 3,550 mm, free lift: 1,750 mm, fuel type: electric, mast type: duplex, fork length: 2,000 mm, total height: 2,350 mm, total length: 3,050 mm, total width: 1,200 mm, color: other, Empty weight: 5.977 kg Lifting capacity: 4.000 kg Fork dimensions: 2.000 x 1.980 mm - Lifting capacity: 4000kg - Lifting height: 3550mm - Maximum fork width: 1980mm Bwslil Hswgv N Ie D Iol - Number of wheels: 4 Wheels - Overhead clearance: 2350mm - Attachment: Side-shift, Fork positioner - Options: Free-lift, Work lights, Full cabin - Fork length: 2000mm - Free lift: 1750mm - Mast: Duplex - Year: 1997 - Documentation available: No - CE mark available: Yes - Serial number: 516027000601 - Operating hours: 6039 - Battery voltage: 80V - Brand/Type: Linde - Capacity: 700Ah - Battery year of construction: 2017 - Drive: Elektric - Transport dimensions: 3050mm x 1200mm x 2350mm (l x w x h) - Transport weight [kg]: 5977kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: reconditioned (used), Functionality: fully functional, warranty duration: 3 months, DGUV certified until: 07/2026, year of last overhaul: 2025, Planetarymixer Model: Rego PM 40 E Bwslil H Dsh H Svus Iel mixer Power adjustment stepless Intervention - protective grid LED control with timer 1 stainless steel kettle 40 liters 1 broom, 1 flat beater electric boiler lift Stationary machine with tank car DGUV V3 tested Connection 400V, 2.3 kW, 16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Used machine overhauled with 6 months warranty Visit our large sales warehouse with over 400 bakery machines!

Condition: used, machine/vehicle number: 007917, X axis working area: 5020 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Bjlil Hswfxkre D Iewl Total number of tool changer positions: 36

Condition: ready for operation (used), Type: SVRM 4R - Lineair 4 rollen afzonderlijk hydraulisch aangedreven = geen slip, speciaal voor conisch walsen 4 geharde rollen 6 digitale uitlezingen conische buiging, kleinste diameter van de kegel is 1100 mm met de bovenrol kunt u zowel dunne als dikke platen verwerken (hydraulische bombering van de bovenrol) maximale snelheid: 7,5 m/min (variabele hydraulische snelheid) Machine met hoge nauwkeurigheid omdat er gebruik wordt gemaakt van lineaire geleidingen voor de zijrollen. Dit betekent dat de zijrollen op geen enkele manier kunnen doorbuigen! (nieuwe machines worden vanwege de hoge kosten niet meer met lineaire geleidingen geproduceerd, in plaats daarvan worden planetaire geleidingen gebruikt, die van mindere kwaliteit zijn) De machine is uitgerust met een backload-functie een kantelcilinder die verbonden is met de bovenste rol; hiermee kan de operator een opwaartse of neerwaartse belasting op de bovenste rol uitoefenen om doorbuiging van de bovenste rol tegen te gaan = bombering van de bovenste rol een ongelooflijk zeldzame functie! De machine is uitgerust met een schokdempersysteem dat handig is om een gewalst werkstuk na het lassen te kalibreren. Dankzij dit schokdempersysteem kan de machine de naad die na het lassen ontstaat, opvangen. Bij het walsen van het onderdeel en het passeren van de naad tussen de boven- en onderrol, worden de schokken niet overgebracht op de lagers en wordt de machine niet overbelast. Een andere unieke eigenschap van deze buigrol is de verhoogde capaciteit voor voorbuigen. Hiervoor moet u de plaatdikte vermenigvuldigen met 1,8. Bijvoorbeeld, een plaat met een dikte van 40 mm x 1,8 = 72 mm. Standaard moet u vermenigvuldigen met 3, voor een plaat van 40 mm komt dit neer op 120 mm. Bwslswgfy Njil H D Iol Tijdens het walsproces kunnen alle andere hydraulische bewegingen gelijktijdig worden uitgevoerd. 2 hydraulische plaatondersteuningssystemen (links en rechts) voor het walsen van werkstukken met grote diameter hydraulische verticale bovensteun ter ondersteuning van het plaatwerk tijdens het walsen, maximale diameter van het werkstuk met deze steun is 6300 mm

Condition: used, Year of construction: 2020, operating hours: 839 h, load capacity: 4,000 kg, lifting height: 4,330 mm, free lift: 1,465 mm, mast type: triplex, power: 55 kW (74.78 HP), fork carriage width: 1,700 mm, ground clearance: 270 mm, front tire type: V= Alliance, H= Goodyear, front tire size: 18-19.5, rear tire type: V= Alliance, H= Goodyear, rear tire size: 10R17.5, total length: 4,900 mm, wheelbase: 2,000 mm, engine type: Deutz TCD 2.9 L4, drive type: Diesel, construction width: 2,080 mm, net weight: 7,050 kg, · Bedienertyp: Sitzen · Lastschwerpunkt: 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel: 763 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 9075 kg / 1840 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2625 kg / 4290 kg · Vorderspur: 1600 mm · Abstand zwischen den Hinterrädern 1640 mm · Sitzhöhe 1407 mm · Gabelträger DIN 15173 A/B: 3A · Bodenfreiheit Mitte Radstand: 377 mm · Gangbreite für Palette 1000 x 1200 quer: 5560 mm · Gangbreite für Palette 800 x 1200 längs: 5560 mm · Wenderadius: 3395 mm · Fahrgeschwindigkeit (beladen / unbeladen): 22 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Zugkraft: 6900 daN · Festellbremse: Haudraulik · Hersteller / Motor Modell / Motornorm: Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585: 55 kW · Nenndrehzahl: 2300 rpm Bjlil H Dsvvxxxj Iswl · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte: 210 bar · Ölmenge für Anbaugerät: 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: excellent (used), Year of construction: 2019, total height: 4,532 mm, controller manufacturer: SIEMENS, controller model: 840 D SL, power: 210 kW (285.52 HP), overall weight: 23,000 kg, space requirement length: 13,480 mm, space requirement width: 10,502 mm, CONTROLS .. CNC controls SIEMENS 840 D SL Belil Hsv Hglbe D Iowl DIMENSIONS / WEIGHTS .. space requirements -left/right-: 13480 mm .. space requirements -front/back-: 10502 mm .. total height: 4532 mm .. total weight approx.: 23000 kg ELECTRICAL SPECIFICATIONS .. total power consumption: 210 kW .. mains voltage: 400 V .. mains frequency: 50 Hz asic machine system with 10 stations Station 1: Component loading (multi-axis handling) Station 2: Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling (max. 15,000 rpm) Station 3: Sauter 112 crown turret (3 spindle units) HSK 40 with external cooling 1 SEMA AE2-35/50/NC 2-axis unit Station 4: 1 SE – HSK 50C spindle unit including internal cooling (max. 15,000 rpm) Station 5: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling Station 6: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling 1 SEMA 2-axis unit AE1-35/50/NC Station 7: 1 hydraulic docking unit including C-axis positioning unit (1 2-axis unit SEMA AE1-35/50/NC) Station 8: 1 hydraulic docking unit including C-axis for positioning 1 permanently integrated angle head Benz or equivalent Station 9: 1 2-axis unit SEMA AE3-35/50/NC Station 10: Permanently integrated angle,S-35/50/NC Station 11: Blow-off inside/outside

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Bwjlohy T Nvsil H D Ijl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++