Used Tabe Agb-475 Bc for sale (2,837)

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Cgo Ijflrhqja Sramet Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Outlet Type: Disc valve Outlet valve: Yes Manhole cover 400mm with clamping ring

Condition: ready for operation (used), Year of construction: 2003, Tank Agitator, IBC Mixer, Liquid Filtration, Inotec, Visco Jet, Used Machine Cgo Iaoq Supqo Sramjt Manufacturer: Inotec, Visco Jet Type: VJ350.030ex Year: 2003 Dimensions: 1100 x 900 mm Material: Stainless steel EX: ZONE 1 Tank Mixer: For IBC tanks with a 150 mm opening Special VISCO JET® "Tornado" mixing element with an effective diameter of 650 mm Stainless steel crossbar with lifting brackets or aluminum crossbar Available with a 1.5 kW power drive Individual speed control for every mixing task VISCO JET® mixing element for low, medium, and high viscosity media

Condition: new, Year of construction: 2024, Construction The standard frame of the container wash is made of stainless steel – AISI 304 (it is possible to make the frame eg. from AISI316 steel - optional) Equipment The IBC wash is equipped with single workplace. It is possible to semi-automatically wash the IBC container inside (using a lowered head) and manual washing of the container from the outside (with a washing gun). Workplace The machine has a system for a dosing single type of chemicals to the process and a tank with a system for heating and maintaining the water temperature. Workstation has a turntable that allows for more thorough cleaning of the container from the outside and an automatic cradle that facilitates rinsing. Cgs Ia Seirfmworamst Installation The container wash has feet that allow to adjust the level of machine. Customer should provide a place with the possibility of connecting media such as: cold/hot water, compressed air and sewer drain. Base with turntable & tilt funtion The washing station has a movable base of the container that allows cleaning the outside of the container from each side. During external washing, the base rotates under the influence of the water jet directed at the container. Rotation can be blocked with a special brake.

Condition: used, Used stainless steel container / transport container / IBC Last use: Chemicals Item number: 10288 Volume: 500 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single-walled Base: Curved Top: Curved Operating pressure according to type plate: +0.2 bar Tank dimensions: Cge Ia Ssu T E Uvjramst Total width: 1200mm Total length: 1000mm Total height: 1000mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: Yes Outlet diameter: 50mm Outlet type: DN50 tank truck coupling Outlet valve: Ball valve

Condition: used, Used stainless steel container / transport container / IBC Last use: Solvent Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Cge Ia Srasu Ngqtjmot Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Distance drain to floor: 265mm

Condition: excellent (used), Used insulated stainless steel container / transport container / IBC Last use: Food Item number: 10845 Volume: approx. 1000 liters Type: Vertical in galvanized stacking frame Height of feet: 100mm Material (wetted parts): 14301 / AISI 304 Manhole: 400mm Version: With insulation and electric heating (heating untested) Operating pressure according to type plate: ATM Tank dimensions: Co Iouy Ratsa Sramogt Total width: 1020mm Total length: 1220mm Total height: 1790mm Materials: Interior: 14301 / AISI 304 External parts: 14301 / AISI 304 Equipment: Nameplate: no Outlet diameter: 37mm Insulation Electrical heating untested

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Co Ia Sswhquueramjgt Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Bcfed2Md7M Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: refurbished (used), Gap Bed Between centers: 100” Swing over bed: 22″ Spindle speeds: 18 – 1400RPM Spindle bore: 3 1/2″ Diameter Chuck mounting: D1 – 11 Cgo Iswga Eyja Sramst Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady

Condition: used, Year of construction: 1971, Serial number: 37xxxx Please contact ATS Norway AS for more information Cs Ia Srjvgyafsamsgt Please provide reference number upon request: 18875 Specifications: - 1971 model - Tires (see pictures) - Floors with doors (see pictures) - Comes with cabin (see pictures) - Scania 81 engine - Delivery by agreement Description: This Scania L80 is sold as a rep object. The owner has put a Scania 81 engine in it. It comes with the doors pictured. An extra cabin is included. Delivery by agreement. HK: 202 Own weight: 8475 Total Weight: 8800 Payload: 255 Width: 345 Length: 878

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,666 h, General Data Measurements width 1180 Ce Ia Sjwg Iarsramjgt Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mmm Shot weight 451 g Stroke volume 475 cm³ Clamping Unit Clamping force 180 T This Victor VS180 was manufactured in 2003. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2004, Offset 5 color with coating Roland 705/3B LV Year: 2004 Number of impressions (mio): 258 Machine control - RCI - RCI JobCard Feeder - Suction feeder table - Anti static device - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - APL but used as PPL Semi Automatic Plate Change - RolandMatic - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans - AlcoSmart - Ink temperature control Coating - Number of coating unit(s): 1 - UV coating Cgs Ia Ssv Ewlvoramst - Tresu chambered ductor blade system - Drying position possibilities: 3 positions( 1/2, 2/3 and after 5th) - Number of interdeck cassettes/lamps: 2 - UV interdeck dryer - UV dryer in delivery: 3 lamps - IR dryer in delivery: (Eltosch) Delivery - AirGlide - Extended delivery - Powder spray: Grafix Cantronic 3000 - Compressed air compressor, excluded - Dampening rollers: combi

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Cgo Ia Sraorz Irremst Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: excellent (used), Year of construction: 1980, Used Striebig panel saw Model Standard 6220 Year of manufacture: 1980 Cutting length: 5300 mm Cutting height: 2200 mm Cutting thickness: Max. 80 mm Motor power: 4.4 kW Cs Ia Sraowhglvsmegt Speed: 4750 rpm Blade diameter: 300 mm Machine length: 6300 mm Machine width: 1257 mm Machine height: 2860 mm Location: In stock, 54634 Bitburg - Available upon request -

Condition: excellent (used), Functionality: fully functional, power: 66 kW (89.73 HP), overall weight: 7,720 kg, Year of construction: 2015, Equipment: additional headlights, air conditioning, cabin, hydraulics, Komatsu WA100M-6 solid rubber/additional hydraulics/air conditioning - Manufacturer: Komatsu - Type: WA100M-6 - Year of manufacture: 2015 - Operating hours: 7175h - Perm. total weight: 7720kg - Power: 66kW Cge Ia Sovgdgcjramjt - CLIMATE - Solid rubber industrial tires - Fast and slow - Auxiliary headlights - Auxiliary hydraulics - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, mileage: 22,597 km, Year of construction: 1977, Serial number: BC01TM8xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18848 Specifications car: - 1977 model - Rep. Object - 144 Hp - Km: 22597 - 4x2 - 3 way tips - Rear brakes warm driven - Engine and gearbox are broker - Comes with another complete engine and gearbox - Spare parts included - Climate - Light - Ready for delivery Specifications crane: - 1987 model - Sesame swing crane - 7 a.m - Extra hydraulics for boys - 2 Hydraulic outriggers - 2 Manual ejectors Cgs Iajvgx Hqe Sramjt - Ready for delivery Description: Engine and gearbox are shared. Therefore sold as a rep object. It comes with a complete engine and gearbox with a lot of spare parts for the next owner. Grabb can be accompanied for extra cost Ready for delivery Km: 22597 HK: 144 Technical approved: no EU-approved until: 31.08.2018 Own weight: 7250 Total Weight: 13000 Payload: 5680 Width: 240 Length: 645

Condition: ready for operation (used), Year of construction: 1999, operating hours: 4,937 h, General Data Measurements width 1180 Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mm Shot weight 451 g Stroke volume 475 cm³ Clamping Unit Clamping force 180 T Max open daylight 970 mm Cge Ia Srswg Ia Eoamot Distance between bars 510 x 510 mm Mould height min 200 mm Mould height max 500 mm This Victor VS180 was manufactured in 1999. A hydraulic injection moulding machine, it offers robust performance for various plastic processing applications. Consider the opportunity to buy this Victor VS180 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, mileage: 543,934 km, power: 266 kW (361.66 HP), first registration: 02/2010, fuel type: diesel, number of seats: 57, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, navigation system, parking heater, +++Original Mileage+++ Engine: Pacaar Emission Class: Euro 5 Transmission: Manual Seats: 55+1+1 sleeper seats with lap belts _____ Safety* Retarder * Cruise control * ABS, ASR * Fog lights * Rear view camera Passenger compartment* Auxiliary heating * Air conditioning * Luggage racks * Vented air vents * Reading lights * Double glazing * Footrests * Refrigerator * Leather headrest inserts Cgs Iaev T E D Ns Sramet * Tour guide microphone * Driver microphone Exterior* Trailer hitch ready * Lift/lower system * Power steering * Tachograph with card * Sun visor * Sleeper cabin ready * Electric exterior mirrors * Roof hatches, fans, roof vents Audio and Communication* Navigation system * Radio/CD * Video/DVD Other* Vehicle dimensions: Length 12.20 m, width 2.55 m, height 3.42 m m * Hubcaps * Dual tires * Tires: Front: 60%, Rear: 60% Our internal vehicle number: 11447 Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles constantly available.

Condition: excellent (used), Functionality: fully functional, power: 130 kW (176.75 HP), empty load weight: 17,800 kg, Year of construction: 2018, operating hours: 3,953 h, Equipment: additional headlights, adjustable boom, air conditioning, cabin, hydraulics, CAT M318F ZSA/Auxiliary hydraulics/Hydr. SW/3953h - Manufacturer: CAT - Type: M318F - Year of construction: 2018 Cgs Ia Sjviuhieramst - Operating hours: 3953h - Weight: 17.800kg - Power: 130kW - Hydraulic quick coupler - Additional hydraulics - Hammer grapple - Adjustable boom - Central lubrication system - Backhoe bucket 75cm - F.O.P.S. stone guard - Dozer blade - Fast and slow - All-round camera - Auxiliary headlights - AdBlue - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs declaration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, mileage: 260,000 km, Year of construction: 2019, Serial number: YV2R0P0D4KA83xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19226 Specifications: - Km: Approx. 260,000 (can increase) - Gear: Automatic - Engine brake/Retarder - Euro 6 - Good tires - Suspension: Steel - Air - Trailer hitch - VBG - 751 Hp - Tool box Co Iasvgy Nys Sramegt - 6x4 - Compressor horn - Rotor beam - Bed - Radio/CD - Climate/AC - Ready for delivery Description: Volvo FH16 750 tipper from 2019. 6x4 with only 260,000 km. Eu-approved and ready for delivery. Km: 260000 HK: 750 Technical approved: Yes EU-approved until: 10.10.2025 Own weight: 13450 Total Weight: 36000 Payload: 22475 Width: 255 Length: 761,7 Euro: 6 Gearbox: Automatic

Condition: excellent (used), Functionality: fully functional, mileage: 92,926 km, power: 265 kW (360.30 HP), first registration: 08/2017, overall weight: 26,000 kg, axle configuration: 6x2, maximum load weight: 9,950 kg, empty load weight: 16,050 kg, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, hydraulics, Mercedes Benz Antos 2536 Side loader Inch SLF XL 28 - Manufacturer: Mercedes-Benz - Type: Antos 2536 - First registration: 08/2017 - Kilometers: 92.926km - Unladen weight: 16.050kg - Payload: 9.950kg - Gross vehicle weight: 26,000kg - Power: 265kw/360PS - Lane keeping assistant - Right-hand drive - Automatic air conditioning - Adblue - 6x2 Cge Ia Sraevdc Uyemjt - Inch side loader (right) - Type: SLF XL 28 - Operating hours: 9764h - With integrated dumping - Type: Zöller FLEX 1100 - Tiltable emptying container - Telescopic emptying mechanism - Vertically and horizontally adjustable - Internal and external operation - Euro 6 - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, Year of construction: 2018, operating hours: 7,556 h, Field of application: Construction Serial number: K7xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18475 Specifications: - 2018 model - 7700 hours - 30350 kg - 159 kW Ce Ia Ssvg A E Deramogt - Undercarriage (see pictures) - S70 attachment - Rototilt - Cleaning bucket - Digging bucket - Cleaning bucket - Topcon Gps - Belt plate width: 60 cm - Machine width: 318 cm - Service history - Central grease - Bunker pump - Climate/Ac - 360 degree camera - Light - Radio - Ready for delivery Description: Great komatsu Pc290 with lots of equipment. The machine has a full service history and can be documented. A 500 hour service has just been done by Komatsu. The machine is ready for delivery. Hours: 7556 Total Weight: 30350 Kw: 159

Condition: excellent (used), Year of construction: 2016, operating hours: 4,960 h, Functionality: fully functional, overall weight: 19,500 kg, power: 240 kW (326.31 HP), Doppstadt DW2060K Shredder/Shredder/Shredder 4960h - Manufacturer: Doppstadt - Type: DW2060K - Year of construction: 2016 - Operating hours: 4960h - Perm. total weight: 19500kg - Power: 240kW / 326PS - Engine: OM926LA - Maximum efficiency thanks to 100% mechanical drive - Limiter" fine shredding system - Contamination-resistant shredding - Grain limitation with limiter system - Choice of shredding packages - Robust tracked undercarriage with two speeds - Lower belt NEW - Discharge conveyor NEW - Rear steering NEW - Remote control NEW - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - Cgs Ia Sovkfp Teramjt - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, Year of construction: 2008, operating hours: 10,840 h, Field of application: Construction Serial number: HCMBCF00T0002xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18984 Specifications: - 2008 model - Hours: 10,840 - 90.2 kw - Weight: 19300 kg - Central grease - Digging bucket - Tooth bucket - Narrow bucket - Changed engine at 10,000 hours - Newly overhauled belt drive when the engine was replaced - Undercarriage (see pictures) - Belt width: 60 cm Cgj Ia Sraevg Ar Demst - Machine width: 281 cm - Rotor lamp - Services taken by owner - Delivery by agreement Description: 2008 Hitachi ZX180-LC3 kept in good condition by owner. The engine was replaced at 10,000 hours complete new engine was mounted,  and at the same time the belt transmission was overhauled. See video. Delivery by agreement. Hours: 10840 Total Weight: 19300 Width: 281 Kw: 90,2

Condition: excellent (used), Functionality: fully functional, mileage: 364,122 km, power: 170 kW (231.14 HP), first registration: 07/2000, overall weight: 11,990 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 5,958 kg, empty load weight: 6,032 kg, Year of construction: 2000, Equipment: ABS, air conditioning, - Manufacturer: Mercedes-Benz - Type:Atego 1223 - First registration: 07/2000 - Kilometers: 364122km - Unladen weight: 6.032kg Co Iajvgv Ths Sramsgt - Gross vehicle weight: 11.990kg - Power: 170kw /230PS - Gearbox: Manual gearbox - 4x2 - ADR - Aurepa tank body - 2 chamber - 1st chamber: 4,200L - 2nd chamber: 4.500L - Total capacity: 8,700L - A1 Delivery: gasoline, heating oil, diesel - Sening measuring system - Air conditioning - Diesel fuel - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, mileage: 164,751 km, Year of construction: 2017, Serial number: ZCFC250DX0515xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19707 Specifications: - 2017 model - 164,751 km - Manual transmission - 180 HP - Service history - 4x2 - Summer/winter wheels included - Just serviced 01/31/25 - Tires (see pictures) - Trailer hitch - Rear view camera - Air conditioning/ac - Diesel heater w/ timer - Extra light - Heated mirrors - 2 seats - Crack in the back door (see picture) - Delivery by appointment. Description: We have an Iveco 50C18 van available for sale. The car has recently been serviced According to the owner, everything should work as it should. Note that there is a crack in one of the back doors (see pictures). Delivery can be arranged as needed. Km: 164751 HK: 179 Technical approved: Yes EU-approved until: 03.02.2026 Own weight: 2748 Total Weight: 5200 Payload: 2377 Cgo Iasvyf Axo Sramot Width: 201 Length: 606,9 Euro: 6 Gearbox: Manual