Used Gesan Dpr 100 for sale (40,379)

Condition: used, Stromab Cutting Machine for Boards up to mm. 250, height mm. 100 Dsb Eornbnke D Nwmjut

Year of construction: 1999, Condition: excellent (used), Dryer material Lanco Year 1999 Debeut T A Ao E D Nwmsut Type: LTR 100

Condition: used, Year of construction: 2018, operating hours: 957 h, fuel type: electric, battery capacity: 63 Ah, battery voltage: 24 V, fork length: 550 mm, color: other, Field of application: Internal logistics Empty weight: 470 kg Lifting capacity: 1.000 kg Dusborvv S Aj E D Nwmst Lift height: 158 cm Maximum passing height: 190 cm Serial number: 6633550 Remanufactured: Yes Transport dimensions (LxWxH): 1,67x0,7x1,9 Please contact Karl Leitner for more information

Condition: ready for operation (used), Year of construction: 2015, operating hours: 19,718 h, Functionality: fully functional, machine/vehicle number: 233358, clamping force: 500 kN, screw diameter: 20 mm, injection pressure: 2.5 bar, ejector force: 30,000 N, ejector stroke: 70 mm, TECHNICAL DETAILS Model: 375 V 500 - 100 Sliding table Operating hours: 19,718 h Clamping unit Clamping force: 50 tons Dsb Eeunk Swo D Nwmsut Opening stroke (max.): 30 / 250 kN/mm Mold height (variable): 172 - 272 mm Clamping platen height (variable): 422 - 522 mm Stroke of the shuttle table: 650 mm Weight on shuttle table: max. 240 kg Weight of the movable molded part: max. 230 kg EUROMAP drying time: 3 - 240 s Ejector force / stroke: 30 / 70 kN / mm Injection unit Screw diameter: 20 mm Effective screw length: L/D 25 Screw stroke: max. 80 mm Calculated stroke volume: max. 31 cm³ Shot weight: max. 29 g PS Material throughput: max. 5.5 kg/h PS, 2.8 kg/h PA6.6 Injection pressure: max. 2,500 bar Holding pressure: max. 2,500 bar Injection flow: max. 64 cm³/s Peripheral speed of the screw: max. 28 m/min Screw torque: max. 120 Nm Nozzle contact force / stroke: max. 50 kN / 180 mm Heating power / zones: 6.7 kW / 5 zones Material hopper: 25 l MACHINE DETAILS Weight: 3,700 kg Dimensions: 3,250 x 2,524 x 1,475 mm

Year of construction: 2021, Condition: new, Absolutely new. Never been used. Capacity 100-120 kg Hub 2500 mm Net weight: 38,7 kg Ribbed and sealed monobloc construction in aluminium alloy. Stainless steel rope. Adjustable capacity by means of a worm screw. Auxiliary safety suspension. Safety device against load dropping due to the spring breakage (>3kg). Centrifugal safety device. Upper rotary suspension with safety hook. Locking device to block the load at any height. Adjustable stroke limiting device. Taper drum rotating on ball bearings. Dsb E D Nsgyrv Hswmout Cable guide in antifriction material. Rotary upper hook with ball bearing.

Condition: good (used), Year of construction: 2022, DRILLING MACHINE DESCRIPTION This is a high-performance automatic drilling center for furniture components. The machine is dedicated especially for large production in small batches. The drilling machine has the ability to drill two parts at once. TRANSPORTING THE ELEMENT The machine is equipped with a magazine from which the elements are taken by means of takers placed on a chain. TECHNICAL SPECIFICATIONS: Length of the element: 280 - 1500/ mm* Width of the element (1 element): 45 - 450 mm Width of the element (2 elements) Three-sided drilling (right, left, top) 45 - 400 mm Width of the element (2 elements):Four-sided drilling (right, left, top, front face/rear face) 45 - 300 mm ( mirror image 45 - 350 mm) Element width (2 elements): Five-sided drilling (right, left, top, front face, rear face ) 45-300 mm. Horizontal drilling: From 25 mm from the edge of the workpiece along the X axis Workpiece thickness: 12 - 40 mm Total power: ~24 kW Weight: ~5,500 kg Dimensions: 5,100 x 2,500 x 2,450 mm Number of upper drilling units: 4 (8 heads) Number of horizontal drilling units: 1 left, 1 right Total number of spindles: 80 pcs*. Number of material stops: 2 pcs. Ability to drill 2 workpieces at once: Yes Supported file formats: .dxf , .mpr * Drilling machine comes in two variants: maximum panel length 1500 mm and 2500 mm NUMBER OF DRILLING UNITS: Vertical top heads: 4 pcs. Horizontal left head: 1 pcs. Horizontal right heads: 1 pc. DUST COLLECTION: Vertical heads: With extraction stubs Horizontal heads: With extraction stubs Dujb Esvdq Ubj D Nwmjt

Year of construction: 2014, Condition: reconditioned (used), Year of Production 2014 Weighing up to 6 kg Weight information: Max 6 kg , Min 20 g, e = 1 g Direction of machine operation L → P Labeling system - Stamping (Quick Piston ) - Bottom Belt labeling ( Belt ) Dujb E Detulrbj Nwmot Touch screen color terminal GT-12C Length of weighing segment 500 mm Width of conveyor belts 300mm Total machine size : 260cm x 110cm Standard thermal printer for 104mm wide thermal strip 160mm thermal strip can be used after changing the thermal strip attachment. Electrically control the positioning of the upper labeling head up/down, front/back. Electrically adjusting the width of the product guides. Conveyor motors made by EBM PAPST ( suitable for continuous shift operation ). Possibility of attaching and configuring product separator on customer's request.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. Djb E D Njrcy Trewmout - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. - 0.2 mm welding possibility for all profile types - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility OPTION - Gasket pressing system

Condition: good (used), Year of construction: 2018, operating hours: 534 h, fuel type: electric, mast type: standard, battery capacity: 63 Ah, battery voltage: 24 V, General information Field of application: Internal logistics Serial number: 6633550 Weights Empty weight: 470 kg Functional Lifting capacity: 1.000 kg Lift height: 158 cm Maximum passing height: 190 cm Dsb E D Nsi Eyyqewmsut Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Tyre brand: Vorne: Vulkollan einfach Hinten: Vulkollan Transport dimensions (LxWxH): 1.6700x700x1900 Additional information Please contact Karl Leitner for more information

Condition: used, Functionality: fully functional, Thermo Scientific FH100X NO.72-320-100 Peristaltic Pump. Thermo Scientific FH100X peristaltic pump is ideal general purpose tubing pumps for high-repeatability, precision metering, and worry free performance in a variety of life science, industrial and process applications. The broad flow range capability of this unit make them ideal for laboratory to pilot process scale-up requirements. FH100X unit, our highly regarded peristaltic pump technology is combined with innovative digital control to provide robust performance at an economical value. This unit offer a reliable alternative to lab piston metering pumps, gear pumps and small circulating pumps used in life science laboratory applications. This stackable, variable speed pumps are self priming, able to operate dry, and contain no valves or seals eliminating replacement needs. Fluid contacts only the tubing, providing for contamination-free pumping in high-purity applications. Deb Esupvvks D Nwmout Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2003, Deckel Maho DMU 100T 4-axis machining center Control: Heidenhain iTNC 530 Year of construction: 2003 x path: 1080mm y path: 710mm z path: 710mm Program swivel head Maximum spindle speed 12.000 rpm. Tool magazine: 32 tools (2x16 tools) IKZ with paper belt filter Deb E D Novdpxfowmsut Spindle cooling Heidenhain scales on all axes Chip conveyor SK40 spindle taper Weight of the machine 10t.

Condition: used, Year of construction: 2007, Technical details: x-travel: 1.250 mm y-travel: 710 mm Dsb Eeukkphe D Nwmeut z-travel: 710 mm table surface area: 1500 x 800 mm table load capacity: 800 kg turning speeds: 12000 1/min spindle drive: 15 / 10 kW control: MILLPLUS iT HEIDENHAIN spindle taper: SK 40 tool change unit: 60 Pos. capacity: 44 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on" *

Condition: good (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 0271143073, I am selling stock of paper foil for mdf, hdf or other profiles... different structures and colors. There are over 85,000 square meters. The selling price for all other stock is 20,000 euros (0.24 euros/sqm) Deb E Dsufgqpj Nwmsut EXW, Marsa, Sibiu County, Romania.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 100 ÇİFT KÖŞE KAYNAK MAKİNESİ, - Allows 0.2 mm bristle welding of white and colored profiles. - Complies with CE standards. - Simplified machine management panel saves time. Provides maximum welding strength. - Possibility of both normal and 0.2 mm welding for coated profiles - The movable right head is fixed with a push button. - The maximum length of the welded profiling is 3180 mm. - The minimum length of the welded profile is 340 mm. Dob Esq U Sx Ej D Nwmout - Maximum height of welded profile 190 mm - Minimum height of welded profile 40 mm - Time saving thanks to easy mold change system. - PLC control system is available. - Heat temperature, welding time and pressure can be adjusted for different profile types. - Heating unit has thermostatic control system Ckdvjrcspu - The degree of the heating plate can be easily changed on the digital display. - Power supply protects the system against sudden voltage changes - 1 set of welding molds are supplied free of charge with the machine.

Condition: good (used), Functionality: fully functional, machine/vehicle number: K PR M 048 1, Equipment in very good working condition, used for making buns with grammage between 40-100 gr. Deb E Djudvr Hs Nwmsut

Condition: used, Year of construction: 1983, Functionality: unexamined, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg Deb E Dsupy Abj Nwmeut - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l

Condition: excellent (used), TOS TV-1000 A CONTUR MV 100 VA CNC machining center Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Control: Heidenhain TNC 410 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Deb E Deuvifls Nwmeut Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg

Condition: as good as new (ex-display), Year of construction: 2024, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer Duob Eonp Ndhj D Nwmot stroke 400mm table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 2050 mm Press force: 100 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Dusbsgu Nz Se E D Nwmst Lower tool: 50, 35, 22, 16 Distance between columns (B): 1700 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 120 liters Main motor power: 7.5 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 800 mm Table width (G): 110 mm Length (L): 2500 mm Height (H): 2000 mm Width (W): 1500 mm Weight: approx. 5300 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: MC-100, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Hard Turning Lathe High precision accuracy 0.0001mm Hydrostatic technology Spindle runout 0.15μm X/Z axis positioning accuracy 1μm Dob E Devl S Dyo Nwmeut X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Quality Guaranteed

Condition: used, Year of construction: 2015, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Duob E D Nwowh Tzwemjt Movement stroke X 450mm Movement stroke Z 904mm Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Maximum tool length 250mm GENERAL MACHINE OPTIONS

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, total length: 6,120 mm, total height: 3,150 mm, net weight: 19,000 kg, total depth: 5,050 mm, volledige CNC indexerende freeskop (2x 2,5°) gereedschapswisselaar met 30 posities koeldeur spindel Longitudinal travel X-axe: 3600 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm Dob E Djv Sfqmo Nwmsut

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, overall weight: 3,000 kg, operating pressure: 6 bar, power: 37 kW (50.31 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, Donaldson Torit dust collector, type DFO 4-32. dust extractor separator Dust extraction for all types of dry dust, welding fume extraction. manufacturer: DONALDSON TORIT DFO 4-32R year of manufacture: 2015 Ultra Web® filtration area: 564.8 m² 7500-21300m3/h 6300-4600 pa Automatic pulse filter cleaning ASCO Donaldson TCB "total control board" Djb E Dovn U Sfs Nwmeut Flow rate between 16-20400m3/h number of oval filter cartridges: 32 filter cartridge type:DONALDSON DFO 2625175 Oval cartridge filter Ultra-Web Spunbond antistatic material, 289 x 365 mm outer diameter x 660 mm long centrifugal fan: 37kw ATEX air delivery: 7500-21300m3/h 6300-4600 pa mounted platform with railing, ladder for maintenance. height: 4200 mm + cyclone ca 2000mm width: 2200mm length: 2200mm weight: 2200kg

Condition: excellent (used), CATALOG NUMBER 7646 Dsbjwglqho E D Nwmeut Technical data: - max. width of the processed element 1100mm - max. thickness of the processed element 150mm - from above: - 2 rubber, sliding, pressure rollers Roller I - grooved rubber roller for calibration Roller II - aggregate + shoe - rubber, sliding roller - brakes - cleaning of grinding belts (blowers) - from below: - 2 sliding, metal, inlet rollers - pulling belt - 2 sliding, metal, outlet rollers - pneumatic belt oscillation - electric table lifting (digital measurement display) - total power 22kW - smooth speed regulation on the inverter - working pressure 6-8bar - diameter of the exhaust port 3x180mm - total dimensions length/width/height 2250x1950x2500mm - weight about 2400kg ADVANTAGES - Italian production - two aggregates - very good condition - unpainted - used grinder Net price: PLN 29,900 Net price: EUR 7,040 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)Net price 29,900,-

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 285827, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Movement stroke X 450mm Movement stroke Z 904mm Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Maximum tool length 250mm GENERAL MACHINE OPTIONS AS092 Automatic power on/off and warm up AS250 ATC auto recovery CO032 Chuck airblast (2nd spindle) BY NC command EL110 Power transformer for European market MM007 Number display magazine panel (n/a with tool ID) MO555 Coolers for ball screw (XZ axis) MO575 Roller guide NO823 USB interface (1 port) SD116 Intelligent performance spindle A SD120 One set of adjusting tools SD130 Foundation kit (plates) SI039 C axis 0.0001° increments Deb E Dowhx I Ae Nwmsut