Used Gesan Dpr 100 for sale (40,385)

Condition: ready for operation (used), General Manufacturer GEA Location Bremen Condition Used Other GEA NT 100 X BC-10Compartment 1:- Volume: 321.66 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Compartment 2:- Volume: 318.09 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Total length: approx. 2,850 mm- Total width: approx. 700 mm- Total height: approx. 2,230 mm- 2 base plates missing Celitdxev Ryrvo Nsgt Heat exchanger exchange surface 241.4 m² last intended use dairy Type plate Year of construction 2015

Condition: new, Year of construction: 2023, operating hours: 2 h, lifting height: 8,200 mm, fuel type: electric, mast type: triplex, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 8,000 mm, Field of application: Internal logistics Empty weight: 3.835 kg Battery: 465 Ah, 48 V, Brand of battery Exide Lifting capacity: 1.000 kg Cjlju Tbgnjitdx Nogt Maximum passing height: 610 cm Serial number: 6965271 Transport dimensions (LxWxH): 1,4x2,768x6,1 Please contact Karl Leitner for more information

Condition: used, Year of construction: 2021, Several machines available from vintage 2021 and 2023. Ask for additional details! Cgjljwcriijitdx Not

Condition: good (used), Included in delivery: 1x post protector, used Manufacturer: Nedcon Material color: blue Total height: approx. 900 mm Post protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg dimensions: approx. 65 x 65 mm Deflector height: approx. 50 mm Hole spacing: approx. 60 mm Hole diameter: approx. 11 mm Suitable for frame profile width: 100 mm Including mounting hardware Consisting of: Cgolov N Twvjitdx Not 4x hexagon screws M 10 x 35 mm 4x hexagon nuts M10 8x washer M10 Your contact person: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional shipping or transport of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, mileage: 249,384 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,100 mm, first registration: 04/2005, emission class: euro3, suspension: steel, tire size: 1195/65R16, Year of construction: 2005, Equipment: trailer coupling, Tyre size: 1195/65R16 Suspension: leaf suspension Drive: Wheel Number of cylinders: 4 Engine capacity: 2.453 cc Empty weight: 2.260 kg Carrying capacity: 540 kg GVW: 2.800 kg Make of engine: Renault Cgjlitdjvkx Icex Njt

Condition: used, Year of construction: 2007, turning diameter 130 mm turning length 280 mm Cgelitjv Skz Rodx Njt control Siemens Sinumerik 840D weight of the machine ca. 4 t

Condition: ready for operation (used), General Manufacturer GEA Location Bremen Condition Used Other GEA NT 100 X BC-10Compartment 1:- Volume: 321.66 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Compartment 2:- Volume: 318.09 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Total length: approx. 2,850 mm- Total width: approx. 700 mm- Total height: approx. 2,230 mm- 2 base plates missing Heat exchanger exchange surface 241.4 m² last intended use dairy Type plate Year of construction 2015 Cgjlitdxjv Ry Ttj Net

Condition: good (used), Gauge block box, gauge blocks, gauge block boxes, parallel gauge block set -Manufacturer: Carl Mahr, gauge block set of parallel gauge blocks, 46 pieces -Final dimensions: 1.0 - 100 mm -Measurement accuracy: Accuracy grade I -Dimensions box: 370/120/H60 mm Cjlitdsk Hdr Eox Negt -Weight: 2.8 kg

Condition: used, Year of construction: 1992, Unloading system Polar TR ER 100-3 (1992) Colitdxouliw Te Nogt Year: 1992 Description - On the right side of the guillotine

Condition: used, Nordberg cone crusher Type SX 100 HP Cgslitsvy Hyfjdx Njt

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Cgsliswbqrtetdx Njt Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Find more new and used items in our store! International shipping costs on request!

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Colsvvxvdjitdx Nsgt Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Condition: refurbished (used), Refurbished. 1 year guarantee. Rotary vane pump. Cjlitdsrta H Tox Nogt

Condition: good (used), Manufacturer: Systema Type: H100 Cgolisi D Dkajtdx Njt

Condition: good (used), Year of construction: 2002, machine/vehicle number: 02022-00, Hand shears, foot pedal, retractable sheet support The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width/working Sheet width: 6020 mm Steel sheet thickness: 1.0 mm Celitsv Szuhsdx Nsgt Aluminum sheet thickness: 1.5 mm Stainless steel sheet thickness: 0.6 mm Without backgauge Thrust: 1000 mm Color: blue Total power requirement: 16 A Space requirement: 6800 x 1600 x 1700 mm Insertion depth: 1000 mm Machine weight: 2400 kg With roller shears Number of uprights: 4 Opening width: 200 mm Bending angle: 145 degrees

Condition: good (used), Year of construction: 1989, Vertical crushing plant Voest Alpine ZS 100 Basic year of construction 1989 (machine/rotor completely overhauled) Machine number 89 914 04 Cgslitdxou U Ukie Njt incl. drive motor 145 KW

Year of construction: 2021, Condition: as good as new (ex-display), Rental Unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Coliof H Azgetdx Nogt The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemical or mineral products. Materials up to approx. 3 Mohs can be processed on the UPZ. The 100 UPZ is the perfect mill for the laboratory, research and development of new materials or even small scale production. Thanks to the easy mill’s door opening, that doesn´t require disassemble of other system parts nor use of tools, grinding tools exchange or revision is very quick. It is fitted with a security device that prevents the opening of the machine while in operation. Motor power: 1.5 kW Construction material: stainless steel

Condition: ready for operation (used), Percussion Mill MFL Type R-CI 100-100 Feed opening 1020 x 760 mm Power: 90 kW E-Motor Cgoljwbbivjitdx Not Weight 9 Tons

Year of construction: 2010, Condition: refurbished (used), Bizerba TU100 summing table after renovation Colitdji Drwqsx Nsgt

Condition: good (used), Manufacturer: Systema Cslioi D Dkdotdx Nogt Type: H100

Condition: ready for operation (used), Platinum thickness: 0.5-4.5mm, component height: top max. 16mm, bottom max. 30mm, components: Chip, MELF, SOT, SOIC, TSOP, PLCC, QFP, BGA, LCC, µBGA etc., Incremental axes X: 0.001mm, Y: 0.001mm, Z: 0.02mm, theta: 0.045°, connected load: 2500W, operating temperature: 18-30°C, control: microprocessor control with CAN interface, operated on PC with Windows® 7, vision system: ESI CorePlace®, automatic board alignment, complete component identification, inspection of solder pads, pin positions, component position, BGA ball count etc., weight: 700kg. On-site inspection is possible. Cgolitewb E Shjdx Net

Year of construction: 2008, Condition: refurbished (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Cjlitdoq Rv E Dex Negt Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: ready for operation (used), Cycle time: 1.16s/QFP with Area CCD camera, 0. 85s/chip with Closed Loop Electromechanical Alignment, optimal placement rate: 3125 on IPC 9850 with Area SCC & LCC cameras, 4200 on IPC 9850 with CLEA, nominal placement rate: 2500-3500cph (components per hour), processable component types: 0201-Chip, MELF, SOT, SOIC, TSOP, TNT, PLCC, QFP, BGA, µBGA, LCC, field size: 42x42mm, fine pitch: Up to 0.4mm (16 mil), Tool change station: 12 nozzle positions, Heads: single gantry with two independently controlled pipettes, Assembly accuracy (X/Y) 3σ: 50µ with Area CCD camera,100µ with Closed Loop Electromechanical Alignment, PCB dimensions (X/Y): 30-330x30-450mm, PCB alignment: fiducial detection by ESI CorrectPlace® incl. Teach-in for drill holes or unusual contours, loading and alignment time: approx. 2.8s, number of axes: 2, length: 1700mm, width: 1500mm, height: 2200mm, weight: 450kg without feeder. On-site inspection is possible. Cgelijwb E Snstdx Net

Year of construction: 2023, Condition: new, Functionality: fully functional, Rental system Hosokawa Alpine AS 100 Aeroplex The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with each other and break reducing their size. Once they are fine enough they are attracted to the central outlet, acting as a sort of static classifier but without a precise sharp top cut in comparison to the AFG (which is fitted with a rotating classifier wheel). Once the comminuted particles make it through, they exit the system either to a cyclone or directly to an air filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the gas pressure on the grinding nozzles or the feed injector, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Technical details Stainless steel construction, pharma design Cslitoq A T Iljdx Nogt Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) Batch operation, for a few grams normally (product dependent) Scope of supply Complete small system comprising dosing channel, spiral jet mill with manual pressure control and filter bag

Year of construction: 2024, Condition: as good as new (ex-display), Functionality: fully functional, Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nitrogen of different products, to help in their grinding process (plastics for instance) or maintain their properties (food for instance). The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Cgjlitdsq Rv Hhex Nst Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery