Used Gesan Dpr 100 for sale (40,431)

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Hersteller: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Cohxyswgpxcoxf Iogt Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 1 - 120 mm no. of strokes 90 /min distance table/ram, stroke up 470 mm table surface area 1100 x 700 mm table height over floor 800 mm side window 400 mm Cgehxjvzxtaoyxf Iet ram surface 740 x 350 mm ram adjustment 100 mm power requirement 37,0 kW weight 11,0 t dimensions (WxDxH) 2,3 x 2,0 x 3,5 m difference-way press with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request T-slots in table and ram according to customer's specification - price on request

Condition: ready for operation (used), Motor power: 5.5 kW Briquette diameter: 80 mm Cgshxyxfswd R Aqo Ijt Sawdust level sensor Operating hours: 6363 h Hopper diameter: 1200 mm Adjustable feed rate Year of manufacture: 1996 Power supply: 380 V

Condition: good (used), Probat HDF 100 rotary valve overall dimensions: 140 cm long, 45 cm wide, 55 cm high. Inlet opening: 46 cm x 9.5 cm. Weight: 270 kg. Cehewgl A Dsxyxf Isgt

Condition: used, Year of construction: 1985, Functionality: fully functional, drop-through hole in table: 1,500,700 mm, table length: 1,400 mm, table width: 500 mm, pressing force: 100 t, stroke adjustment: 20,100 mm, overall weight: 22,000 kg, DGUV certified until: 05/2026, Raster HR 100-1400 automatic punching machine with Kohler roller feed Tie-rod construction High-quality solid cast iron construction Hydraulic overload protection Stroke height 20-100 mm Ram adjustment 60 mm Speed 15-80 rpm S7 control system, built in 2003 Cohxyxfowg Ag Hs Isgt Available with Kohler belt conveyor, straightener, and washing machine upon request

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, overall weight: 7,490 kg, fuel type: diesel, color: orange, next inspection (TÜV): 05/2027, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle number: G300103 German vehicle In our yard in Kaufungen - Kassel, available immediately More information from Luis Lucena VIDEO: Sewer cleaner with 2,875 operating hours Rockstroh Dran Jet 100 Year of manufacture 2010 Pump capacity 91 l/min - 150 bar 115 l/min - 120 bar 128 l/min - 160 bar* 120 l/min - 180 bar* 106 l/min - 200 bar* 92 l/min - 210 bar* *only for vans High-pressure system High-pressure unit positioned on one side Safety, overflow, and pressure control valves 1.5" water filter Pump drive Vehicle PTO (Box) Hydraulic (Box or Box Body) Hose Reels 1 x 80/100/120m DN10/131 x 80m DN16/191 x 40m 3/4" Water Filling Reel Errors excepted We are happy to accept your used vehicle as part payment. Financing is available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Cehxyxfsv Rt T Hs Iogt ----.

Condition: new, overall weight: 36,000 kg, maximum load weight: 27,933 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,735 mm, loading space volume: 92 m³, Year of construction: 2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 100 moving floor +/- 92 cbm, Cargo Floor with 21 10 mm planks, stainless steel wear plate at the rear under the moving floor, complete emptying (moving bulkhead), push-in/push-out function, KNAPEN V1 radio remote control (for floor, lift axle, work lights), loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, 2 storage boxes, work lights, ABS, EBS, BPW Eco Air HD axle(s), disc brake system, lift axle, landing gear(s), air suspension with lifting/lowering device, vehicle can be covered with advertising and/or lettering. Cjhxyswb N Uyoxf Isgt Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, Year of construction: 1989, pressure 100 t stroke 560 mm throat 540 mm dayligth 800 mm table surface area 1000 x 1000 mm die cushion capacity 50 t die cushion stroke 200 mm die cushion area 710 x 650 mm table height over floor 910 mm ram surface 1000 x 1000 mm feed down 400 mm/s feed up 300 mm/s working feed 57,7 mm/s oil volume 650 l power requirement 37,5 kW Cehxyxsvzxqxjf Ijgt Weight 15,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation as is where is, WITHOUT putting into operation Price for commissioning (with new electric control) on request

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Cjhxovvi Scsyxf Iogt

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Infeed: 1,000 x 650 mm Cgehotpaktsxyxf Iet Final product: approx. 0/70-0/200 mm Feed hopper, vibration feeder, electric drive with generator, side and main discharge belt

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, Functionality: fully functional, 1,0 St. gebr. Vertikal Spritzgießmaschine Cohewca T Njxyxf Iegt Hersteller: ARBURG Typ: 375V500-100 Drehtisch Baujahr: 2014 Schließkraft: 50 Tonnen Schnecken DN: 25 mm Max. Hubvolumen: 59 cm³ Steuerung: SELGOCIA Ausstattung: Drehtisch zweiteilig Durchmesser 1.000 mm

Condition: used, Year of construction: 2018, Used machine Cgohxysnbiplexf Ijt

Condition: new, -Size: 1370x190x2000mm -Capacity: 100 packs -Weight: 109kg -Misting sensors are designed to be connected to the seam of your stove and not to the outlet of the cooker hood. -Connect the hood and then to a drain. -The drain must be connected at the bottom. Dqjtyx -Steam radiators do not work with the extractor hood outlet. -There is no fan connection Cjhxju S Nu Doyxf Iegt

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm Cshxyxjvzxp Usf Iogt table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: used, Ferwood Code: RU0000640 - Manufacturer Code: 2-056-17-0930 - Condition: Used - Compatible Machine: HOMAG - Weight: 1KG - Dimensions: 20X20X20 - If interested we offer a revision service, contact us. Cgjhxyxfevaytfo Iot

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm dayligth 1000 mm table surface area 1025 x 650 mm Cjhxjvuunmjyxf Iogt die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available

Condition: used, Functionality: unexamined, Ferwood Code: RU0005377 - Manufacturer Code: TDM 1.2-100-300-W1-000 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Cgehxyxsv Efkmjf Ist

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 700 mm Cjhxovuumceyxf Ijgt max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1993, pressure 100 t distance between columns 1900 mm stroke 500 mm Distance table/ram, stroke up 800 mm table surface area 1850 x 1000 mm Hole in the table 160 mm table height over floor 850 mm ram surface 1850 x 800 mm Side window 540 mm speed down 400 mm/s speed up 400 mm/s working speed 20 - 70 m/min oil volume 900 l Power capacity 34,0 kW Weight 13,0 t Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m Cshxsvuui Deyxf Iogt permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1990, pressure 100 t throat 300 mm stroke 20 - 120 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 800 x 560 mm hole in the table 310 x 180 mm table height over floor 745 mm ram surface 520 x 245 mm ram adjustment 75 mm Cjhxysvuug Aoxf Iogt power requirement 5,5 kW weight 5,5 t dimensions (WxDxH) 1,1 x 2,4 x 2,4 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, back gears, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t Cohxevut Ufeyxf Isgt die cushion stroke in table 200 mm die cushion area in table 600 x 600 mm side window 600 mm ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s working speed 17,5 mm/s oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available

Condition: used, Year of construction: 1978, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm ram adjustment 80 mm power requirement 7,5 kW Cehjvzxnwexyxf Isgt weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m year of manufacture 1957 - modernized 1978 permitted for manual put-in according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand and foot operation

Condition: used, Year of construction: 1994, Pressure 100 t distance between columns 910 mm stroke 600 mm distance table/ram, stroke up 1000 mm table surface area 1340 x 1085 mm hole in the table 705 x 405 mm table height over floor 800 mm side window 685 mm ram surface 1235 x 1000 mm oil volume 450 l capacity of ejector 7,5 t ejector stroke 150 mm speed down 380 mm/s speed up 185 mm/s working speed 28 mm/s oil volume 450 l power requirement 15,0 kW weight 9,5 t Cohxyxevuk E Ief Ijgt dimensions (WxDxH) 2,3 x 1,9 x 3,6 m hydraulic fast-stroke trimming press for cast parts with oilhydraulic drive, light guard (Sick), hydraulic blank holder / ejector in ram (7,5 t / 150 mm), control device for hydraulic blank holder, pneumatic ram interlocking table surface 1340 x 685 mm or 910 x 1085 mm ram surface 1235 x 685 mm or 910 x 1000 mm as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm Cgohxyevuk Ezjxf Iet dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm Cgjhxyxfjvuufxo Ijt oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available