Used Gesan Dpr 100 for sale (40,431)

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-100 / Excellent technical condition Year of construction: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Injection pressure: 2000 bar Metering volume: 49 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition and was used for testing injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from the Sensor Kistler brand - mold pressure measurement It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Dimensions Weight: 2300 kg Length/width/height: 3.18x1.47x1.99 m Drive: Pump/motor: 15 kW Heating output: 4.9 kW Cgjbvmkewcmpkjxfot Total output: 19.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product Cebvmep N Dv Hekxfjgt parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 400 Rotor width (mm) 1000 Drive capacity (hp) 40 Rotor blades (pieces) 3(5) x 1 Stator knives (rows) 2 Hopper opening (mm) 490 x 990 Total length (mm) 1348 Length machine (mm) 1120 Width total (mm) 1577 Width machine (mm) 1216 Height (mm) 1914

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/outlet: O 52/46 mm -Part Number: 44 100 92 921 -with air filter: C 11 100 -Price: per piece -Number: 6 pieces -Dimension: Ø 190/285 mm -Weight: 1.15 kg Cgjbved Swrkjmkxfjt

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 Controller SN:234547768256008, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Cebvmkxsi Ebhljfsgt

Condition: refurbished (used), 100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Cgjbvmkehh Suhexfet Tank volume: 100,000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm Weight: approx. 16.300 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - bituminous coating on the outside for protection - Upon request, we can provide the tank with a full interior coating on bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a with a plastic inner cover A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, warranty duration: 3 months, DGUV certified until: 06/2026, Dough Divider Kemper Type: V 100 Cgsbveqy Atqomkxfjt Hourly Output: approx. 600 - 1800 dough pieces/hour Weight Range: approx. 200 - 1150 g Funnel Capacity: 60 kg Outlet Belt Height: 720-950 mm (Belt Bottom Edge) Stainless Steel Construction, Mobile Dimensions: 10307 / 1880 x 730 x 1600 mm LxWxH Connection: 400 V, 50 Hz, 3-Phase, 1.5 kW, 16 A CEE Plug Used Machine, Cleaned with Warranty + Service Option: Maintenance Contract Leasing & Rental Service Visit our large bakery machinery exhibition with weighing system!

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Cgobvmowcm I Tjkxfot Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2025, Condition: new, APPLICATIONS The S-Series granulators are mainly used as large central granulators for In-house recycling applications for processing large thick-walled parts in one stage or as a second-stage granulator after a shredder to achieve higher results or throughput rates Cobvmkop N D Tyjxfjgt GENERAL DESCRIPTION The high-performance S-Series granulators offer widths from 600 to 1000 mm with diameters of 400 and 560 mm. The all-welded heavy steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, blades brackets and rotor shaft are oversized. The standard V-cut ensures a high quality grind with a very low percentage of fines in the starting material. The removable third stator blade (optional) acts as a deflection wedge and allows the machine to be quickly adapted to different application scenarios. Other standard equipment also includes easily adjustable blades from the outside, reducing the risk of contamination. S-SERIES - HIGH PERFORMANCE GRANULATORS ADVANTAGES: "The easily removable deflector wedge acts as a third stator blade and can be used to adjust the aggressiveness of the rotor at the first cut point. The V-Cut technology produces a high quality regrind, with simultaneous reducing energy consumption and noise. The high performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure to prevent material contamination. "Both rotor and stator knives are externally adjusted. Rotor diameter (mm) 560 Rotor width (mm) 1000 Drive capacity (HP) 100 Rotor knives (pieces) 5 x 2 stator knives (rows) 2 + 1 Hopper opening (mm) 1000 x 650 Total length (mm) 2310 Length machine (mm) 2200 Width total (mm) 1800 Width machine (mm) 1330 Height (mm) 3770

Year of construction: 2016, Condition: excellent (used), Plate roll hydraulic variable axis 3 roll capacity 3100x 130 mm with prepinch Brand MG model PH3.1500 year 2016 machine in perfect conditions. top roll size 880 mm side rolls size 800 mm useful width 3100 mm Capacity Plate width mm. 3000 Rolling thickness mm. 130 Pre-bend thickness mm. 100 Cgsbvmkepudvnjxfst minimum rolling diameter 1000 mm electric power 150 Hp run the hydraulic unit variable axis rolls configuration with pre-bending -Rolls all the 3 are driven and synchronized with planetary gear unit and hydraulic motor each roll -Conical plate bending the 3 rolls are tiltable front-back special configuration for cones forming -Digital position readouts of the 3 rolls -friction free technology all movement on bearings -Overload safety hydraulic protection -Centralized operator panel electric control joysticks and digital readouts -Safety and emergency devices per norms . EU CE conformity.

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-68251 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Cebvmkxel Eck Dsfegt

Year of construction: 1988, Condition: excellent (used), Cartridge filter of the company Seitz-Filter-Werke Factory No.: 1988 Type: S000-31H07 DN 100 Year of construction: 1991 Capacity tank: 243L Screws: M20 x 100A2 (14 pcs.) Container: Permissible operating pressure (bar): Liquid 6 / Gas 6 Permissible operating temperature (°C): Liquid 85 / Gas 85 Candles: Quantity: 31 pcs. Length: 1 m Mesh size: 5 x 3 mm (length x width) Dimensions: Height: approx. 2.13 m Width:approx. 65 cm Weight: approx. 300 kg In very good condition! Cobjfbckwovmkxfsgt

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement Csbvmkxoubamvsfjgt from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Cgsbvmowcm Sljkxfjt Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Cobjwgpxpjvmkxfsgt Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 Power Supply, serial no. according to photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Cjboi Ebi Ujvmkxfegt

Condition: refurbished (used), 100,000 liter buffer tank / pressure vessel, standing on a stand ring Vessel data: Volume: approx. 100,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90°C Inner diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Vessel with dished ends. Tank Equipment: ⦁ 1 DN 600 manhole with blind cover ⦁ 7x 3/8" pipes, closed inside the tank, open outside ⦁ 2 lifting eyes in the shell area ⦁ 2 lifting eyes on the top of the tank ⦁ 2 lifting eyes on the tank feet ⦁ 1 2" drain, connected to the side of the shell with a ball valve ⦁ 1 Ø33.7 x 3.6 mm vent, connected to the side of the tank and down outside the insulation, with a ball valve ⦁ 1 DN 125 connection, ending in a flange on the outside, and connected to the center of the tank with a 90° bend ⦁ 1 DN 125 connection, ending in a flange on the outside, connected to the top of the tank and connected to the center of the tank via 2x 90° bends Cobvmewf N Stekxfsgt We are happy to offer the new tank insulation in any thickness upon request. Please contact us if you are interested!

Condition: excellent (used), Year of construction: 2005, Arburg 270C 300-100 with the Wittmann W621 robot Year of construction: 2005 Injection unit: Screw diameter: 25 mm Cgjbvewcmg Nemkxfst Injection weight: 41 g Injection pressure: 2240 bar Metering volume: 49 ccm Clamping unit: Clamping force: 30 t Distance between tie bars: 270x270 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Robot Wittmann W621 Year of construction: 2004 5-axis robot: 3 axes are driven by servomotors (electric); axis B (rotation) and C Travel in axes: X-550, Y-1000, Z-1500 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 2250 kg Length/width/height: 3.42x1.48x1.99 m Drive: Pump/motor: 7.5 kW Heating output: 6.3 kW Total output: 13.8 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): 100,000 liter extinguishing water tank for underground storage, single or double walled, 1 manhole DN 600 with blind cover incl. seal and screws, outside with bitumen insulation - second-hand -... tank volume: 100.000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm weight: approx. 11.600 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: Cobvmkxei Enwvofegt - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 liters.

Condition: excellent (used), Year of construction: 2012, Arburg 375V 500-100 / Vertical injection molding machine with rotary table Year of construction: 2012 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Csbvmkswcmlfexfsgt Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 0x0 mm Size of the clamping platens: 504x424 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Very good technical condition Tie-bar-less machine Operating hours: 30,000 h in automatic mode Hydraulic core pull x 1 Control unit with hot runners x 6 Hardened injection unit - bimetal Turntable diameter: 900 mm Very precise turntable, driven by a servo motor, controlled by an inverter Self-closing nozzle Built-in quality control system Infrared safety curtains Dimensions: Weight: 3380 kg Length/width/height: 2.52x1.47x3.25 m Drive: Pump/motor: 18 kW Heating output: 4.9 kW Total output: 22.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Aluminum silos standing on foot ring (plastic granulate silos) - used - designed for a bulk density of 0.6 kg/dm³. Cgsbeipyq Nevmkxfjt volume: 100.000 ltr. Available quantity: 4 diameter: approx. 3.500 mm cyl. height: approx. 9.900 mm Total height: approx. 12,500 mm (+ 1,100 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Roof slope of the top floor: 15°. Equipment and connections: In the topsoil: 1 x access and vent opening DN 600 with cover. 1 x vent opening with cover 2 x flange DN 100 1 x block flange DN 50 1 x roof edge railing with handrail 2 x crane eyes In the jacket: 1 x access door 850 x 2000 mm with ventilation slots 6 x pipe holders for filling pipe (without filling pipe) 1 x block flange DN 50 Various pipe penetrations in the area of the lower stand frame The silo ends at the bottom in a 90° cone with DN 200 flange (discharge height: 1,000 mm). Additional price: Two of the silos have a two-row ladder with back protection (incl. 1x rest platform) The currently connected measuring and control equipment is included in the above-mentioned Offer included. For their function however no warranty is assumed! Please note that the two silos differ slightly in terms of their connections and their position differ slightly. Otherwise according to pictures and drawing.

Condition: excellent (used), Year of construction: 1998, Arburg 270C 500-100 Year of manufacture: 1998 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit : clamping force: 50 t tie bar distance: 270x270 mm size of clamping platens: 446x446 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal The machine has an additional control panel - control by remote control The machine has been regularly serviced by the authorized service Arburg Dimensions: Weight: 2200 kg Length/width/height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,3 kW Cgsbvmkowcmkboxfet Total power: 21,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Aluminum silo with long upright frame Technical data / dimensions Available quantity: 2 Volume: approx. 105,000 liters Container type: Silo Condition: used Suitable for food: no Design: upright Inner diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific weight of the medium: 0.6 to/m³ Operating pressure: unpressurized Material / composition Inner jacket material: Aluminum Features Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Gradient: approx. 15 degrees Bottom floor type: Cone Cone inclination: 60 degrees Csbvmotxitcjkxfsgt Top floor: 2 x crane eyes 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (Silopilot) 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Jacket: 2 x flange DN 32 (Min-Max detector) 1 x filling line, leading into the silo at the top, ending in TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection pipe Notes: - The silos end at the bottom in a 60° cone with flange and extraction box. - One of the two silos has a dust filter. - Some of the silos have visual defects (brown discoloration, various holes for cable ducts in the standing frame), but these do not affect the function of the silos The currently connected measurement and control technology is included. However, no guarantee is given for their function!

Condition: excellent (used), 5 x aluminum silos standing on a foot ring (plastic granulate silos) - second-hand - designed for a bulk density of 0.6 kg/dm³ Technical data / dimensions Available quantity: 5 Volume: approx. 100,000 liters Container type: Silo Condition: used Design: upright External diameter: approx. 3,000 mm Cylindrical height: approx. 16,250 mm Total height: approx. 17,500 mm Specific weight of the medium: 0.6 to/m³ Csbvotq A Emomkxfegt Material / composition Jacket material: Aluminum Features Stand form: Foot ring/stand frame Top base type: Conical base Gradient: approx. 15% Bottom shelf type: Cone Cone inclination: 90 degrees Top floor: 1 x DN 600 access dome with hinged lid and safety grille 1 x NW 200 ventilation nozzle with rain hood 1 x flange nozzle for Silopilot (level measurement) 1 x Block flange for full detector 1 x Roof edge railing with handrail 2 x crane eyes Jacket: 1 x access door 850 x 2025 mm 1 x filling pipe NW 80 with tangential entry into the silo, ending at the bottom in B-coupling at the bottom 1 x cable protection conduit (19 mm) 1 x connection piece for full detector Various openings in the frame shell for the passage of pipes The silo ends at the bottom in a 90° cone with an outlet flange DN 500 (outlet height: approx. 500 mm). Remarks: The currently connected measurement and control technology is included (if available). However, no warranty is given for their function! One of the silos has a two-pass access ladder with back protection and dwelling platform (surcharge: € 1,500 plus VAT). Otherwise according to pictures and drawing

Condition: used, 100 m³ buffer tank made of steel, horizontal, in a frame Volume: 100,000 ltr Cobvetv Rp Hemkxfogt Dimensions (LxWxH): 15,400 mm x 3,500 mm x3,500 mm Insulation: 100 mm mineral wool, on all sides Wall construction: Insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: 1 x manhole for inspection work 1 x connection piece (supply and return (boiler)) 1 x connection piece (flow and return (consumer)) 2 x PT 100 temperature sensors

Condition: excellent (used), Aluminum silos standing on foot ring (plastic granulate silos) - used - designed for a bulk density of 0.6 kg/dm³. volume: 100.000 ltr. Manufacturer: Braby Available quantity: 1 diameter: approx. 3.000 mm Cyl. height: approx. 7.500 mm Total height: approx. 8,700 mm (incl. 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Inclination of the top soil: 15°. Inclination of the cone: 90 Equipment and connections: In the top floor: 1 x access dome DN 600 with hinged cover 1 x air vent with fly screen 1 x roof edge railing with handrail 2 x crane eyes 1 x flange for filling pipe Various nozzles for measurement and control technology On the shell: 1 x inspection door approx. 850 x 2,000 1 x filling pipe NW 80 1 x cable pipe 1 x connection piece for full detector Various pipe holders for filling pipe The silo ends at the bottom in a 60° cone with flange. Cjbolg A Uujvmkxfsgt The currently connected measuring and control technology is included. However, no warranty is assumed for their function! Otherwise according to pictures and drawing.