100,000 litres / 100 m³ extinguishing water tank

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 0901 0009, cutting height (max.): 10 mm, nominal flow rate: 3,000 m³/h, table length: 1,900 mm, table width: 1,450 mm, TECHNICAL DETAILS Working area: 1,900 x 1,450 mm Cutting thickness: 10 mm MACHINE DETAILS Knife system: Oscillating drag knife and ultrasonic knife Airflow rate: 50 m³/min Electrical data Voltage: 400 V, 50/60 Hz Number of phases: 3 Ph / N / PE Connected load: 3.5 kVA Main fuse: 16 A Control voltage: 24 V DC Rsdpfxsyu Ry Ne Abwjr EQUIPMENT Vacuum unit conversion to Rovicore RTM vacuum table with distribution channel

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): 100,000 liter extinguishing water tank for underground storage, single or double walled, 1 manhole DN 600 with blind cover incl. seal and screws, outside with bitumen insulation - second-hand -... tank volume: 100.000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm weight: approx. 11.600 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: Redpfxoi Enwve Abwer - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 liters.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20190824, feed rate X-axis: 33 m/min, overall weight: 2,800 kg, rotational speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, workpiece width (max.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely adjustable feed speed: 8-33 m/min Spindle diameter: 40 mm Spindle 1 - bottom: Ø125 mm (Ø152 mm groove cutter), 4 kW Spindle 2 - right: Ø115-170 mm, 4 kW Spindle 3 - left: Ø115-170 mm, 4 kW Spindle 4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Roller feed system dimensions: Ø140x35x50 mm Extraction connection diameter: 4 x 120 mm MACHINE DETAILS Feed motor power: 3 kW Total electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Rjdpeyu Ii Ijfx Abwer Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Solid cast and welded steel frame Chromed worktable for secure material feeding Side guide rollers for material with pneumatic drive Professional cardan shaft drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Electric adjustment of working height Ergonomically positioned control panel according to EU standard

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Rodpfeyu If Nsx Abwjr Automatic motor calibration Touch control panel

Condition: excellent (used), Stainless steel tank 2 m3 Rsdpfx Asq U Aufebwer

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Rodpfx Asyqw Sqsbwor Automatic start of the pressing process

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-M5-22-48408, repeat accuracy: 0.004 mm, number of axes: 7, The new price of the machine in 2023 was €48,700! TECHNICAL DETAILS Number of axes: 7 Arm length: 2.5 m Repeatability: 0.0042 mm Volumetric accuracy: 0.054 mm MACHINE DETAILS Rodpfeyqwgbex Abwer Calibration date: 03.2023 Operating temperature range: 10 °C – 40 °C Operating humidity: 95% (non-condensing) Operating voltage: 100 – 240 V AC Frequency: 47/63 Hz Notes: Without CAM2 probe/touch Professional license Specifications, information, and technical data are provided by the manufacturer; therefore, no guarantee can be given by the seller.

Condition: good (used), Used GRP flat-bottom tank with 221 m³ capacity Previous storage medium: 30% hydrochloric acid Density: 1.15 kg/dm³ Volume approx. 221,000 liters Diameter approx. 4,000 mm Total height approx. 17,420 mm Weight approx. 7,650 kg Tank with domed top and flat bottom. The tank is also equipped with mounting points for an access ladder. Equipment: 1 manhole DN 600 1 outlet nozzle DN 80 1 vent nozzle DN 100 1 filling nozzle DN 80 with elbow to the wall Redpfx Aoldggnsbwsr 1 pipe socket DN 80 for level measurement 1 coupling R 2" for overfill protection otherwise as per drawing.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 90 207, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 2,000 rpm, quill stroke: 100 mm, No minimum price – guaranteed sale to the highest bidder! Rsdpoyv Avtefx Abwjr TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm Spindle speed range: 40 - 2,000 rpm Quill stroke: 100 mm Feed speed range: 5 - 2,000 mm/min Rapid traverse: 4,000 mm/min Tool holder: SK 40 MACHINE DETAILS Control manufacturer: Heidenhain

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Redpjyv Aucefx Abwor

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, mileage: 69,200 km, power: 75 kW (101.97 HP), overall weight: 4,900 kg, sweeping width: 2,100 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nSweeping width: 2,100 mm\n\nMileage: 69,200 km\n\nMACHINE DETAILS\n\nPermissible total weight: 4,900 kg\n\nTotal power requirement: 75 kW Rjdpfx Aboyv Atfswsr

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, travel distance X-axis: 2,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 1,700 rpm, controller model: Heidenhain TNC 155, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 900 mm Z-axis travel: 1,000 mm Redpfxsyv Ar Us Abwsr Clamping surface: 2,200 x 960 mm Spindle speed range: 20 – 1,700 rpm Tool holder: SK 50 Rapid traverse: 10 m/min Number of milling head positions: 4 MACHINE DETAILS Control model: Heidenhain TNC 155 Dimensions & Weight Space requirement (L x W x H): approx. 7,000 x 4,200 x 2,900 mm Machine weight: approx. 16 t

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: W4X133Y01284, Year of construction: 2021, operating hours: 5,829 h, load capacity: 1,200 kg, lifting height: 1,924 mm, construction height: 2,200 mm, fork length: 1,150 mm, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lift height: 1,924 mm Overall height: 2,200 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Standard Drive type: Electric Dimensions & Weight Dimensions (L x W): 2,500 x 800 mm Weight: 1,500 kg Rsdpfeywix Rox Abwsr Battery: 48 V, 375 Ah Operating hours: 5,829 h EQUIPMENT Former Linde full-service contract unit Initial lift – can carry 2 pallets at once / good ground clearance for uneven surfaces All measurements are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift, at your own risk. Collection ONLY with email confirming payment! Collection WITHOUT appointment Monday to Friday from 7:00 am to 4:30 pm. If the mast is too high for transport, it can be disassembled upon request. For delayed collection, a storage fee of €20 per machine per day applies (payment must be made before collection).