Used New Holland-Kobelco E195B El for sale (118,494)

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, Functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Dkebvrzswd N D Tsy Aol Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: used, machine/vehicle number: 007930, Max. panel width: 4500 mm Max. panel length: 2200 mm Djbvrzyjwgkuls Aekl No of Grippers: 9 Second flexible pusher: yes Thin sheet loading: yes

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Dkobvoixqg Nerzy Ajl Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Year of construction: 1998, Condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), Dkjbvjfnk Eherzy Ael spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm Dkebvrzyeul Efmo Asl diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Dksbortrztevrzy Asl Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: used, Motor output 3 kW total power requirement 3 kw Dkjbvrzsv Nq Skjy Asl Weight 1.400 kg

Condition: used, machine/vehicle number: 007912, Max. panel width: 3200 mm Dkobvjwd Ir Aorzy Asl Max. panel length: 3200 mm Main saw blade projection: 75 mm No of Grippers: 5

Year of construction: 2000, Condition: used, machine/vehicle number: 30336, Article number: MA999 Manufacturer: Noble Type: Micromat 203 Year of construction: 2000 Machine number: 30336 Control: CNC he 1904 Length [mm]: 1500 Dkobvrzjdacqhey Ael Width [mm]: 1250 Height [mm]: 1650 Weight [kg]: 1600 Power supply: 380V Working hours [h]: 1858 Positioning range x/Y/Z [mm]: 760 X 310 Cutting force [to]: 20 2 piece of multimedia tools / 3 x / 6 x with various tools Accessories: manual / schematics

Condition: new, 80 Containers of valves, tanks and pumps Dobov H Acvovrzy Askl

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Dksbvrzsvr Hf Esy Ajl Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Debvrortrxiezy Askl Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 52840-031, type of input current: three-phase, total width: 1,600 mm, total length: 3,500 mm, total height: 2,500 mm, roll diameter: 76 mm, overall weight: 5,200 kg, material width: 305,457 mm, input voltage: 415 V, Elsner AFR-18 Film, Foil and Paper Rewinder for producing of CONSUMER small sized rolls for household Updated- age 2009 with Floor Mounted Gantry/Electric Chain Hoist • Product width 12" and 24" (305 mm and 610 mm) • Cut-off knife with infinite lengths up to 4.75" (120 mm) diameter product Dkeborxvmvsvrzy Asl The updated Elsner AFR-18 high speed rewinder produces consumer size rolls of aluminum foil, food film, and baking paper at the fastest production speed in the industry. The faster speed offers a substantial cost savings to manufacturers and converters for added profits. The AFR-18 produces 12-inch and 18-inch (305 and 457mm) roll widths at production speeds up to 48 rolls per minute or 3,000 feet (915 m) per minute. Standard machine core OD sizes range from 1.25 to 1.75 inches (32.0 to 44.5) mm). The AFR-18’s multi-purpose turret rewinder is servo controlled and easily adjustable while running. Servo drive technology provides precise monitoring, synchronization and operation of the AFR-18. Cut length is infinitely adjustable from 16 feet to 500 feet (5 to 152 m) with a maximum finished roll diameter of 3-inches (76 mm). Operator controls and settings are easily engaged from an ergonomically designed touch screen featuring a bright, user-friendly display. The PLC provides built in settings for various films and foils and automatically controls the production process. A fault history readout and machine diagnostics are also provided via the display. The AFR-18’s automatic tension control closely monitors the product and interfaces with the variable speed belt-driven unwind to maintain proper web tension. A product delivery conveyor is standard while various roll closure options are available to meet customer requirements such as a food film tail finder that changes the texture of the product at the end of the roll to make it visible to the end user. Also offered is an automatic aluminum foil tape, a label closure, or a hot melt glue closure system. Contact Elsner for your specific requirements today.

Condition: used, machine/vehicle number: 007702, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 95 mm No of Grippers: 9 Dkebvrzsvap Eqoy Ajl

Condition: reconditioned (used), Deckel FP5 NC Toolroom Milling Machine Model: FP5 NC Original Year of manufacture: 1986 Control: DECKEL DIALOG 4 Table Area: 1000 x 550mm 'X' axis Travel: 710mm 'Y' axis Travel: 600mm 'Z' axis Travel: 500mm Spindle Taper: SK 40 Spindle Speeds: 18 - 6300 RPM Spindle Power 7.5 kw Dkjbvrzewhwhbsy Ael 380V - 3 PHASE Machine Weight = Approx 3665 kg's Control cabinet = Approx 460 kg's Splash Cabinet = Approx 300Kg.s The machine is in very good working order. The splash cabinet is included and has been partially restored. New Linear bearings have been fitted for all the door rails & some of the internal panels have been Re-Powder coated. This machine has not had a lot of run hours for its years and still quite a very nice machine. Note: Machine Is currently fitted with Vertical spindle Head. Machine has capability for use with Horizontal milling attachment, however the Horizontal Spindle support arm is not included. The Horizontal Spindle arbors and spacers are however included.

Condition: used, Used Aeromatic Fielder model MP1 VP approximately 10 litre capacity stainless steel mixer / granulator. Unit has bottom entry 3-blade mixer with drive. Includes side entry chopper. Unit has jacketed removeable bowl. Has local controls. Includes various inserts to reduce bowl capacity. Unit is mounted on mobile base. Djbvsmhhpbjrzy Askl

Year of construction: 2010, Condition: like new (used), Technical Specifications Two L-shaped plates L-shaped plate width: 340 mm L-shaped plate height: 300 mm Profile width at 90° max.: 180 mm Profile width at 180° max.: 220 mm Profile height: max.: 210 mm Profile height: min.: 40 mm Dkobvjwh Uz Esrzy Aol Profile height with special adapter: min.: 20 mm Profile length: max.: 2,520 mm (special lengths optional) Smallest frame dimension: 480 mm Power supply: 230/400 V, 3~, 50/60 Hz Output power: 5.2 kW Compressed air supply: 6 to 8 bar Air consumption per weld: 120 l Length: 3,265 mm, depth: 750 mm, height: 1,800 mm, weight: 950 kg

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Available from Prototype Lab, equipped with: Dobvrzotxc Ndjy Ajkl Elnik PLC Controller Windows OS Afterburner ACCU-Temp NEL H6 Hydrogen Generator MSA Gasgard XL Control Unit Elnik's MIM 3000 furnaces process any metal with any binder in a one step debinding and sintering cycle without having to move the parts. This is accomplished through a gas tight refractory metal retort with a gas management system. The gas management system consists of mass flow controllers for the retort and hot zone and a partial pressure valve at the specially designed and modified dry vacuum pump. Different flow of gases into the hot zone and retort and a slight partial pressure inside the retort guarantee that no binder materials stick to the cold walls of the furnace. Useable Retort Size: 16.5" x 18" x 24" Useable Volume: 116 Liters Total Square Area: 4,224 sq/in Pump Speed: 115 CFM

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Dsbvrovthdfozy Aokl

Condition: used, machine/vehicle number: 007789, Max. panel width: 920 mm Max. panel length: 3000 mm No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes Dkjbvevzc Syerzy Ajl

Condition: used, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1200 kg - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm Dkjbvrzyjwiin Nj Aol - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, Selo SSB2000 Steamed cake donut line Dobewg Equevrzy Askl 2022, The SSB 2000 is designed for a continuous production of Steamed Cake donuts starting from the infeed of trays in a steam tunnel with continuous transport by conveyor belts. At the start of the SSB 2000, the baking trays are greased and filled with the dough and positioned on the conveyor belt which is taking over the filled baking trays for the transfer to the steam tunnel. The donut dough is steamed in a different time range, depending on recipe and product size. After the steaming process, the trays with the ready Steamed Cake Donuts are automatically depanned and transported, while in the meantime the trays are re-filled and circulated without washing. The maximum capacity of the SSB 2000 is approximately 20.000 Steamed Cake donuts per hour. The maximum capacity of steamed mini cake donuts will be approximately 45.000 per hour. Never been used in production. With manuals / drawings / technical spec.

Condition: like new (used), Year of construction: 2010, According to the Elumatec* website, the machine has the following features: "Simultaneous processing of the outer contour and the weld seam on the top and bottom surfaces of the profile. Four knife positions for individually assembled knife assemblies. Spring-loaded grooving knives enable optimal grooving on convex and concave profile sections. Dkebvewh Uzrerzy Ajl Precise and safe feeding of heavy and tall profiles (e.g., doors) thanks to an adjustable feed mechanism. The profiles cannot twist because they are secured by horizontal and vertical clamps." Cutting diameters up to 260 mm are possible for very deep profiles. Standard blow-off device to prevent inaccuracies due to chip accumulation. Versatility thanks to separate selection of grooving knives and cutters, as well as individual cutter combinations with fast changeover times. Four cutter positions for freely matching cutter sets. Four cutter spindles for cutter diameters up to 260 mm. Automatic profile differentiation between frames and sashes in cutting positions 1 and 2. Technical Information Milling spindle diameter: 32 mm. Milling spindle for cutter sets up to 200 mm high. Compressed air supply: 7 bar. Length: 980 mm, width: 1700 mm, height: 1670 mm, weight: 590 kg.

Condition: used, Year of construction: 2002, Overview  This stretch blow moulding machine was manufactured in 2002 by France-based SIDEL. It is suitable for producing PET bottles in various formats and is immediately available for sale. The machine includes a preform tipper, container, and feed system. Technical data Capacity: 24,000 b/h Formats: 0.25 l, 0.5 l, 1.0 l, 1.5 l PET bottles Neck finish: 28 mm PCO Voltage: 400 V Frequency: 50–60 Hz Scope of Delivery  Sidel SBO 20 Series 2 blow moulder Preform tipper Container system Preform feed system Dobvrzowiiy Eoy Askl

Condition: good (used), axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, first registration: 07/2022, suspension: air, color: other, tire size: 385/65R22,5, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Tare weight: 6180 kg, Gross weight: 39000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Sunroof, Axle type: BPW, BPW, EDSCHA = Additional information = General information Cabin: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Debvrswh I D Hszy Aokl Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire profile left: 9 mm; Tire profile right: 8 mm Axle 2: Tire profile left: 13 mm; Tire profile right: 14 mm Axle 3: Tire profile left: 8 mm; Tire tread right: 9 mm Dimensions Dimensions (L x W x H): 1410 x 255 x 400 cm Weight Curb weight: 6,180 kg Payload: 32,820 kg GVW: 39,000 kg Functional Sunroof: Yes Environment Emission class: Euro 0 Maintenance General technical inspection (AIT): inspected until June 2025 Condition Technical condition: good Visual condition: good Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.