Used Atlas-Copco Xas 46 Ddg for sale (11,243)

Condition: good (used), Year of construction: 2005, overall weight: 5,349 kg, volume flow: 2,166 m³/h, pressure (max.): 9.7 bar, Equipment: type plate available, PROD. - ATLASCOPCO TYPE - GA200 FF S/N - AIF097457 YEAR - 2005 Fjbvsurv Swjq R A Aogb POWER (kW) - 211 EXPENDITURE. (m3/min) - 36.1 CIS (bar) - 9.7 WAVE - no BUILT. DRYER - yes

Year of construction: 2020, Condition: new, machine/vehicle number: 311345882, Atlas Copco Secoroc DTH drill pipe 102 114mm unused 4x 102mm / L= 5000mm 4x 114mm / L= 6000mm Fgebvq Rjmwitte A Aeb 3x shank adapters 114mm 1x drill bit 140mm Additional information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: excellent (used), total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here Fjbvq Rop N H Huo A Aegb a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: new, Year of construction: 2021, DZS 100 VSD + Claw vacuum pump contactless - wear-free with built-in frequency converter with 3 ~ ph. motor 3.0 kW 360 - 460 VAC 50/60 Hz Nominal pumping speed 100 m³ / h Ultimate vacuum: 50 mbar (abs.) Connection suction side: 1 1/4 " Connection outlet: 1 1/4 " Fsbvq Rjmv E H Us A Ajgb The DZS series are long-life pumps with low maintenance costs and excellent efficiency. low maintenance costs and excellent efficiency. The pumps are equipped with a non-return valve, exhaust silencer, base frame and vibration dampers in a housing with housing with drive motor and gearbox.

Condition: good (used), I sell the screw compressor: Atlas Copco GA208 PACK Motor - 18,5kW, Power - 2,6 m3/min., Pressed air max.8 bar Dimensions 2200 x 1140 x 1250 mm Fgobvjmk E Drsq R A Aeb 38370 working hours All working.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Maximum operating pressure: 10 bar Compressed air production: 192 l/s Fjbvq R Aet Du Sye Aogb Power: 75kW Speed: 3000 r/min Weight: 1550kg

Condition: good (used), Year of construction: 2012, overall weight: 500 kg, volume flow: 178.8 m³/h, pressure (max.): 9.8 bar, Equipment: type plate available, PROD. - ALTAS COPCO TYPE - GA18FF PLUS Fjbvqsrcky Rj R A Ajgb S/N - API320588 YEAR - 2012 POWER (kW) - 18.5 PUMP. (m3/min) - 2.98 CIS (bar) - 9.8 HRS (DOC/GENERAL) - 18055 / 22077 WAVE - no BUILT. DRYER - yes EXCHANGER - YES ON TANK - no DOCUMENTS - no

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty Fobvoq E Irajq R A Aogb • available immediately or within 7 working days

Condition: good (used), Functionality: fully functional, power: 87 kW (118.29 HP), fuel type: diesel, fuel tank capacity: 80 l, overall weight: 8,350 kg, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: CRG108371810-1, Equipment: crane, gripper hydraulics, hydraulics, rubber tracks, Atlas Copco drilling rig MUSTANG 4 - F1 Composed by: DRILL MAST BMI 3.9 HD - New roller type incl. chain feed, hyd. feed motor with gear reducer and neg. brake, Force on the Feed beam 85 kN Feed and retract force on Rotation Head 47 kN Feed length ..... 3900 mm Total length..... 5650 mm Feed rate speed..... 26m/min HOSE REEL. FOR FEED BEAM 3.9 and 3,9HD for guiding hyd. hoses to power head. OFF-HOLE SHIFT, hyd. operated, allows rotation head to move laterally 270 mm SERVICE CONTROL PANEL with valves laterally mounted DRILLING CONTROLS mounted on flexible arm SILENCED POWER UNIT with 2 hydraulic pumps A10V+A10V, Engine Deutz D 914 L06 2V step III, air cooled diesel engine rated 86,5 kW, 2300 rpm, 24V El. and safety system, oil tank 180l, filling pump, filter unit , fuel tank 80l and piping. Electrical oil cooler incorporated. MAST ATTACHMENT with hydraulic elevating device (double cylinder) and clamp for drill mast. ATTACHMENT for FEED HD type with 500 mm feed advance cylinder CRAWLER, U-F25-1-67 (7 rollers) hydraulically driven, with Rubber pads, Ground clearence 310mm Track width: 300 mm Track length: 2570 mm Crawler width: 1950 mm / Rig width 1950 mm Weight: 1050 kg crawler / 6300 kg rig Max inclination: 30° Max speed: 2,2 km/h Max totally traction force: 66,1 kN HYDRAULIC JACKS Set of four. stroke 4x 450 mm in rear and front elephant foots incl. EMERGENCY STOP DEVICE Always included in basic unit. ASSEMBLY KIT ROT.HEAD DHR48H56-68 Note: rotary head is not incl. in kit ROTARY HEAD DHR48H68-3 Rotation motors 2xOMSS250 Gear ratio : 4,31 :1 , Including floating sub 2 3/8 API Reg box SELECTOR VALVE KIT serial/parallell mode ROT. HEAD DHR48H68 given Serial mode rot.: 0-80 RPM - Torque 2850Nm Serial mode rot.: 0-40 RPM - Torque 5700Nm Figures at 90 l/min and 175 Bar HYD. ROD HOLDER AND BREAKER Incl. plate jaws. Free opening 250 mm. (Extend feed 360mm) Gripping force 88,25 kN (19,730 lbf.) at 180bar Breaking torque 23,8 kNm (5,400 lbf.) at 180 bar HYD OPERATED DIVERTER HEAD DHR48, basic kit including cutting collector head, attachment and two hyd cylinder Guides and seals for ODEX strings not included, To be specified and ordered separately GASKET DIVERTER HEAD tube 89mm GUIDE KIT Diverter head for casings 178mm 7 , MAIN HOIST with short crown block Hydraulically driven hoist HP6/E FH, with disc brake.Hydraulic Fgebeuwfnaovq R A Aeb shut-off device for minimum rope capacity. Steel wire 10mm, L=30m. Lifting hook. Short crown block Lebam type, to handle tubes in drill center. Max. pull capacity 1st layer :10,0 kN Max. lifting speed 1st layer :38m/min HOLD BACK DEVICE new type DTH HAMMER FOG LUBRICATOR LUBROSTAR type incl. high pressure air hose to swivel. Max. 30 bar operating pressure. Lubrication oil tank holds 10 litres. FOAM-WATER PUMP max flow 30 l/min Max delivery pressure 25 bar. RIG CLEANING DEVICE spray gun kit to be used in conjunction with foam water pump SWIVEL 4.5-SI for mud drill activities BELLIN PUMP type NG1200- L2PC max flow 660l/min at max 25 bar - rotor and stator fault WANGEN mud pump with helical rotor, 470 L/min, 25 bar - rotor and stator fault TILTABLE PIPE RACK 40PCS x 76mm x 3 tubes 7 BAR AIR OUTLET for grinder HYDRAULIC OUTLET FOR WELDER HYDRAULIC WELDING UNIT HWG 200-30 defective ROUND JAWS SET FOR CASING OD 178 mm HOLD BACK PRESSURE SYSTEM drill pipe and accessories are sold separately

Condition: used, Functionality: fully functional, Manufacturer: Atlas Copco Fgebvouh N S Ioq R A Ajb Type: ZT132VSD-FF Power: 132kW/50Hz Max. pressure: 8.6 bar Air delivery: 19.5 m³/min Operating hours: 71 979 h Dimensions: 4040mm L x 1650 W x 2000 H Net weight: 3700 kg

Condition: used, Atlas Copco GA 410 Febvqerw H Dao R A Aogb

Condition: good (used), Good working condition. Please check out our other listings as well. Fgobvjqpfnbsq R A Aeb

Condition: good (used), Year of construction: 1996, overall weight: 3,500 kg, volume flow: 1,248 m³/h, Equipment: type plate available, PROD. - ATLASCOPCO TYPE - GA110 S/N - AIF037491 YEAR - 1996 POWER (kW) - 110 OUTPUT. (m3/min) - 20.8 CIS (bar) - 7.5 COOLED (AIR/WATER) - air NEW/USED - USED Fgebvqsth Umrj R A Aob

Condition: new, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm Fobvehkttpoq R A Aogb • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: used, ATLAS COPCO TYPE: ZR90 SCREW COMPRESSOR Fobvjuruf Neq R A Ajgb

Year of construction: 2021, Condition: like new (used), Air compressor which is used very little because of the lack of work. The reason for it to be sold is the closing of the factory. Febvqsnl Dvds R A Aegb

Year of construction: 2020, Condition: new, Field of application: Construction Attachment suited for: Loaders Selling price: € 100, US$ 105,9 Galen Group is very experienced in delivering custom solutions to the underground mining industry. No matter the need, Galen’s experienced design, engineering and manufacturing teams deliver the solution that is right for you. More heavily guarded underground mining buckets designed for corrosive mining materials. For the entire underground loader line, Galen Ground Engaging Tools system now offers bolt on half arrow ground engaging tools (GET) for bucket edges. The system is designed for high abrasion applications where weld-on GET experience high wear rates. With the retention system, the bolt-on GET offer more wear material than standard weld-on GET, and the bolt-on design enables quick removal and replacement. Fgsbvon Tm A Toq R A Ajb Despite additional wear material, the low-profile front edge eases pile penetration and promotes fast bucket loading.

Condition: new, Atlas Copco G5FF 500 lt screw compressor NEW with refrigerant dryer Specification: • condition - New • manufacturer - Atlas Copco • capacity - 790 l/min Fjbjg Tzvxovq R A Asgb • main engine power - 5.5 kW • tank - 500 l • maximum working pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 65 dB) • meets CE standards • weight - 221 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • user manual in Polish • available within 7-10 working days

Condition: new, Year of construction: 2023, overall weight: 340 kg, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer Fsbvq R Aoh Unupe Aogb - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: used, Year of construction: 2008, operating hours: 9,700 h, ATLAS COPCO QAS80 2008 1960 KG TOP ----VEHICLE HISTORY * FIRST HAND * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST Febvq R Aervu Ubs Ajgb VEHICLE EQUIPMENT * YEAR OF CONSTRUCTION 2008 * TYPE: QAS 80 * OPERATING HOURS: 9700h * KW: 64 * TOTAL WEIGHT: 1960 KG * READY FOR USE IMMEDIATELY ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATE AND 15 DAYS AUSTRIAN LICENSE PLATE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU & third countries, a deposit of at least 500.00 ¤ / 1,000.00 ¤ levied (For sales to the EU and third countries will be levied deposit/guarentee of at least ¤ 500.00 / ¤ 1000.00) Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see homepage Important note - Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: good (used), Year of construction: 2018, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Atlas Copco Lohenner, vertical compressed air tank, galvanized Fobvq R Aju T Tqlj Aegb -Contents: 1000 L -Operating pressure: 11 bar -Accessories: including attachments see photos -Dimensions: 1110/930/H2480 mm -without documentation -Weight: 253 kg

Condition: good (used), Year of construction: 1998, operating hours: 10,300 h, overall weight: 475 kg, fuel type: electric, volume flow: 186 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, 22kw 3.1m3/min ATLAS COPCO GA22 screw compressor Continuously serviced and maintained 22kw screw compressor for sale. Manufacturer: Atlas Copco GA22 SP operating hours: 10350 Febstxpd Ijvq R A Aegb Year of manufacture: 1999 Capacity: 3.1 M3/minute, pressure: 10 bar Power 22kw main engine speed: 3,000/min Net weight: 405 Kg Dimensions: mm (LxWxH) Noise level: 66 dB service booklet, circuit diagram.

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, Functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Fgsbvjv Snn Ijq R A Ajb Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: new, Year of construction: 2021, For sale are several new coolers from Mesabi suitable for various Wirtgen asphalt milling machines and in Atlas Copco ( Wagner MT 433 & MT5020 ). There are different sizes and models available. Year of construction : 2019 , 2020 , 2021 Price on request Fgjbvq R Ajudkrzj Aob Location : 24229 Dänischenhagen

Condition: excellent (used), Manufacturer: SCA / ATLAS COPCO Year of construction: 2020 Dosing unit: SCA ADKE-2K-6000-H Pumpe: PPK57-0571P15-0800-SMC-KP5 Control unit: 90904.020441 Location: Dresden Fobjt Tyipevq R A Ajgb We have other SCA solutions on offer. Please do not hesitate to contact us.