Used Eumega Md-3 for sale (64,167)

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Load area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes, each with a capacity of 10 t, 14 x stake pockets in the outer frame, 70 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking as per regulations, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, also available with a 9 m load area length + widening in stock. Surcharge for: aluminum ramps = price: €2,200, warning panels with lighting = price: €800. Subject to printing errors, errors and changes. Sample images. More details at: ! Hsdpe Agt D Rsfx Abaow

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,400 mm incl. slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approx. 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More details: ! Hodpe Agt E Sofx Abasw

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load monitoring, upper deck length approx. 4,400 mm including slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x lashing point pockets in the outer frame, 32 x lashing points, ramp approx. 4,200 mm long (2-part), ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Hedpfx Ae Agt Hajbasw

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Scaneca 3D body scanner – Modern body measurement, quick and precise, with a permanent license and input devices. Ready to use. The Scaneca 3D body scanner enables quick, non-contact, and detailed capture of the human body. The data obtained can be used for professional body analyses, individual consultations, and a variety of other applications. Your advantages at a glance: Fast 3D body capture: The entire body can be digitally captured and measured in a very short time. Detailed body data: Capture of numerous body measurements and proportions for a comprehensive analysis. Non-contact and comfortable: The measurement is carried out without direct body contact, making it particularly pleasant for the user. Digital evaluation: The captured body data is available digitally and can be used for documentation, consultation, and comparative measurements. Comparable results: Ideal for documenting body changes over a specific period and visualizing developments. Versatile applications: Suitable for gyms, personal training, health and wellness centers, fashion, ergonomics, and professional body analyses. Professional presentation: The modern 3D technology offers an innovative added value and enables a clear presentation of the measurement results. Efficient workflow: Body data can be captured quickly and supports structured and individual customer consultation. Hedpfx Aboz Erzljajw A modern solution for anyone who wants to make body measurement digital, precise, and professional. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping are available upon request! For more information, you can of course contact us personally.

Condition: good (used), mileage: 31,753 km, power: 88 kW (119.65 HP), first registration: 04/2024, fuel type: diesel, tire size: 225/70R15, axle configuration: 4x2, wheelbase: 3,450 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,410 mm, total width: 2,050 mm, total height: 2,550 mm, loading space length: 2,960 mm, loading space width: 1,870 mm, loading space height: 1,910 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 2015 kg, Gross vehicle weight: 3300 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 88 kW (118 hp), Engine displacement: 2179 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side wall paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat covering: Fabric, Seat adjustment: Manual, L2H2 Airco BPM Vrij 3 Seats Cruise Control Euro6 120 hp!, Spare wheel, Tire type: All-season tires = Additional information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 225/70R15 Brakes: Disc brakes Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,015 kg Payload: 1,285 kg GVW: 3,300 kg Functional Hjdpfxe Af Ipre Abajw Loading area height: 58 cm Maintenance APK (technical inspection): valid until 08.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €325 per month (delivery van, 72 months); Please inquire for more information and conditions

Condition: good (used), mileage: 37,069 km, power: 88 kW (119.65 HP), first registration: 10/2023, fuel type: diesel, tire size: 225/70R15, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,420 mm, total width: 2,070 mm, total height: 2,530 mm, loading space length: 3,120 mm, loading space width: 1,870 mm, loading space height: 1,930 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 2015 kg, Gross vehicle weight: 3300 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Bluetooth, Engine power: 88 kW (118 hp), Engine displacement: 2179 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L2H2 Airco BPM Vrij 3 Seats Cruise Control Euro6 120 hp!, Tire type: All-season tires = Additional Information = General Information Hodpj Af Inxefx Abaow Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/70R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,015 kg Payload: 1,285 kg GVW: 3,300 kg Functional Loading area height: 56 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €308 per month (van, 72 months); Please inquire for more information and terms.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,422 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.33 mm, overall weight: 3,900 kg, table load: 800 kg, controller manufacturer: AGIE, controller model: Vision, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Progress 3 wire EDM machine was manufactured in 2006. It features travel paths of 500 x 350 x 430 mm and a maximum workpiece weight of 800 kg. The machine is equipped with the AGIE Vision control unit and includes various near-new clamping systems and a wire alignment device. If you are looking to get high-quality erosion capabilities, consider the AGIE Progress 3 wire EDM machine we have for sale. Contact us for further details. • Technical overhaul of the machine in 2025 by Techma- Drive Motor M30- Motor with Pinion (tested)- MSS Central Control Unit (24V AC/DC)- Pressure Hoses- Dual Level Floats (S130) • Max. Workpiece Weight: 400 / 800 kg • Max. Taper Angle: 30° / 100 mm • Space Requirement (L x W x H): 2.8 x 2.4 x 2.3 m • Power Frequency: 50 Hz • Nominal Power: 12.1 kVA • Rated Current: 17.5 A Hodpfsz Ert Ijx Abaow • Short-circuit Current: 10 kA • Cabinet / Generator Type: CABINET (IPG-CNC 02D) • Additional Equipment & Accessories: Various near-new clamping systems, wire alignment device

Condition: good (used), mileage: 25,579 km, power: 88 kW (119.65 HP), first registration: 01/2024, fuel type: diesel, tire size: 225/70R15, axle configuration: 4x2, wheelbase: 3,450 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, total length: 5,410 mm, total width: 2,050 mm, total height: 2,520 mm, Equipment: ABS, air conditioning, traction control, = Additional Options and Accessories = - Partition Hodpfj Af Il Isx Abasw = Notes = Configuration: 4x2, Unladen weight: 2015 kg, Gross vehicle weight: 3300 kg, Air conditioning, Partition, Color: White, Engine power: 88 kW (118 hp), Engine displacement: 2179 cc, Euro emission standard: 6, ABS, ASR, Starter battery, Body type: extended and raised, L2H2 Airco New Model Cruise 3 Seats BPM Exempt Euro6 120 hp!, Spare wheel, Tread depth of spare wheel: 5%, Tire type: All-season tires = Additional Information = Axle Configuration Tire size: 225/70R15 Brakes: Disc brakes Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 5 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,015 kg Payload: 1,285 kg GVW: 3,300 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €325 per month (delivery van, 72 months); Please inquire for further information and terms Identification License plate: KLEYN1

Condition: good (used), mileage: 64,387 km, power: 107 kW (145.48 HP), first registration: 01/2018, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,810 mm, total width: 2,070 mm, total height: 2,480 mm, loading space length: 3,040 mm, loading space width: 1,750 mm, loading space height: 1,870 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = Hjdj Agf Stspfx Abaow - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1582 kg, Tare weight: 1918 kg, Gross vehicle weight: 3500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2500 kg, Tow hitch, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 107 kW (143 hp), Number of cylinders: 4, Engine displacement: 2299 cc, Fuel: Diesel, Euro: 6, Drivetrain: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L2H2 145hp NAP Euro6 Navi 3-seater Tow hitch Low mileage First owner!, Spare wheel, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: V-455-KR Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm; Suspension: Coil spring Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring Weights Unladen weight: 1,918 kg Payload: 1,582 kg GVW: 3,500 kg Functional Loading platform height: 58 cm Maintenance APK (Technical Inspection): Valid until 07.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2

Condition: used, empty load weight: 5,300 kg, maximum load weight: 18,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2014, loading space length: 9,400 mm, suspension: steel, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 900 mm, loading area length approx. 9,400 mm, tie-down points. -- Subject to printing errors, errors and changes. Sample images. -- More data available at: !, More details: ! Hsdj Agt E Iopfx Abajw

Condition: used, Year of construction: 2001, Edge banding machine BIESSE ARTECH Ergho 3 - Manufacturer: Biesse - Type: ARTECH Ergho 3 - Year of manufacture: 2001 - Edge banding and edge magazine CB-700 - Flush trimming unit IN-701 Cut and wrap adjustable from 0-3.6-11-15 degrees with 12,000 RPM. - Flush milling unit RI-700 - Chamfer milling unit SI 700 - Surface scraper blade RBK-501 - Buffing unit - Working height approx. 900 mm - Workpiece thickness 10 - 50 mm - Workpiece width min. 50 mm - Workpiece length min. 150 mm - Edge thickness (roll material) 0.4 - 3 mm - Edge thickness (strip material) 0.4 - 15 mm - Edge width 13 - 55 mm - Feed rate 10 m/min - Electrical supply 400 V - 50 Hz - Connected power 6 kW - Compressed air connection 6 bar - Extraction 1 x D = 80 mm Hedpfxs Agwd Do Abaow - Overall length of the machine approx. 4080 mm - Weight 1640 kg

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.261, Like-new 2-component mixing and dispensing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material feed thanks to an eccentric screw pump. This V2 version is additionally equipped with container heating (30–150 °C per container) and vacuum degassing of the materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: complete material flow path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material temperature control throughout the entire material path - Material change in just a few minutes – almost no material loss - Stator change with only 3 screws – service without production downtime - Pinch valve and mixing tube change without tools in seconds - Lightweight mixing head made of carbon / aluminum / GRP – ergonomic - Swivel arm for fatigue-free handling (robot mount can be retrofitted) Hedpjy Txfxsfx Abasw - Mobile thanks to the roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year of manufacture 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, stepless Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, capable of withstanding overpressure and vacuum, with electric inclined blade stirrer Container heating: heating jacket per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers can be switched (individually with full performance or simultaneously with half performance) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Level monitoring of the material containers - Clogging monitoring - Condition monitoring of the pinch valves - Flow measurement and bubble detection Discharge methods: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and saving the potting data in the Mur.Tech Cloud is possible upon request. The analysis over a longer period helps to improve efficiency and to detect maintenance cycles early. Connection to the company network is possible both wirelessly and via cable. Application areas: adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by the original team. Sold as seen, with exclusion of all warranties. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Hjdpfxezabnzs Abaow Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 7FBEST15 12090, Year of construction: 2009, operating hours: 1,319 h, load capacity: 1,500 kg, lifting height: 3,250 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, gearing type: automatic, battery capacity: 920 Ah, remaining battery capacity: 65 %, battery voltage: 24 V, fork carriage width: 990 mm, fork length: 1,195 mm, fork width: 100 mm, front tire type: cushion tires (black), front tire size: 18x7-8, rear tire type: cushion tires (black), rear tire size: 18x7-8, empty load weight: 2,520 kg, color: yellow, Equipment: head guard, lighting, sideshift, trailer coupling, Toyota 7FBEST 15 3-wheel electric forklift from year 2009 with a load capacity of 1,500 kg. The mast is a duplex with a lifting height of 3,250 mm. Equipped with a side shifter and fork positioner. Hydraulics are leak-free, service performed! All work carried out by an authorized dealer! The forklift is in very good condition, UVV inspection available upon request. Technical data: Hedpfx Asy N A Shebaew Manufacturer: Toyota Model: 7FBEST 15 Year: 2009 Rated load: 1,210 kg Maximum load: 1,500 kg Unladen weight: 2,520 kg Operating hours: 1,319 h Overall height: 2,150 mm Fork length: 1,195 mm Lifting height: 3,250 mm Mast: Duplex 3-wheel Side shifter Fork positioner Cabin Battery: 24V 8PzS 920 PB Remaining capacity: approx. 65% (operating time per charge approx. 5-6 hours) Including charger Transport available VAT can be shown separately Net export available with a valid EU VAT number or export to a third country.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC Delem DA-58T Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. Hsdpfxegi Dkye Abaow See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 1990, functionality: fully functional, Updated Electrics Hodpfx Ajzt S Uwsbajw Scrap Conveyor 2 Plane Straightener Multi Checker Unit

Year of construction: 2026, condition: new, MDK 3000 brush washing machine with Muser The unwashed fruit is fed into the infeed, then, after a pre-wash, it is cleaned again by another fresh water shower on the conveyor belt. Easy to clean, equipped with durable, food-grade polypropylene/acetal modular belts with steplessly adjustable belt speed in two directions, with two steerable rollers and two fixed rollers, or with anti-vibration feet. Requires minimal maintenance. Technical data: - Rated capacity: 3000 kg/h - Power consumption: 5 kW, 400 V, 16 A, three-phase - Material: Material no. 1.4301, AISI 304 stainless steel - Dimensions: 4300x1250x2222 mm - Discharge height: 1370 mm - Weight: 420 kg - Washing tank water capacity: 800 L/shift - Water consumption: 100-200 L/h (depending on settings) - Water connection: ¾” quick connector - IP65 electronics - Muser equipped with a durable hammer (also suitable for beets and quinces) - Rasp mill: the rasp mill can be switched off electronically, so the washing machine is also suitable for stone fruit - Equipped with 4 counter-rotating brushes for intensive washing - Rotating paddle that pushes the fruit towards the conveyor belt Hodpfx Ajfd E R Usbajw Optional: - Different screen inserts for the rasp mill: for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – Sensitive sensor, which allows the fruit washing machine as well as any type of Maurer belt press to work in harmony with the washing machine without clogging - Adaptive electric valve - The fresh water jet only works when the conveyor belt is running - Air injection - with nozzles and a fan at the bottom of the tank for intensive washing - Air knife - removes water from the fruit surface, so that less water gets into the final product - Circulation pump with filter - ensures the correct flow in the washing tank

Condition: refurbished (used), Year of construction: 1997, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, controller model: Siemens 840 C, spindle speed (max.): 4,000 rpm, The machine has been completely overhauled! TECHNICAL DETAILS Travel range, X-axis: 1,500 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,250 mm Speed range: 10–4,000 rpm Spindle power: 40 kW Spindle interface: HSK-A 100 Pallet size: 1,000 × 1,000 mm Pallet speed: 1–500 rpm Pallet load: max. 2,000 kg Tool magazine: Chain magazine Tool positions: 161 MACHINE DETAILS Hedpfxj Agftbe Abasw Control system: Siemens 840 C Overall dimensions: 8,500 × 4,800 × 4,800 mm EQUIPMENT Pallet changer Horizontal and vertical automatic head Rotary table Chip conveyor Paper filter

Condition: used, mileage: 189,000 km, power: 140 kW (190.35 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,500 mm, total width: 1,950 mm, loading space length: 3,280 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Towbar: Wiring for trailer socket, extended exterior mirror arm left/right, MBUX multimedia system (7" touchscreen), spare wheel with road tyres, spare wheel holder under rear frame incl. jack, cabin seats: comfort passenger seat, cabin seats: comfort driver's seat, jack. Additional equipment: Overhead storage compartment above windscreen, storage compartment below dashboard on passenger side, rear tow hook, adaptive brake light, driver's airbag, hill-start assist, traction control system (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, cabin roof lining, automatic driving light activation, electronic brake force distribution (EBV), driver assistance system: Crosswind Assist, body/chassis: standard flatbed, Keyless-Start, communication module (LTE) for digital services, fuel tank: main tank 71 litres, steering wheel (mechanically adjustable steering column), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 3.0 litre - 140 kW CDI CAT, wheelbase 4325 mm, low-emission according to Euro 6, seat belt system with warning device (driver's side), seat covers/upholstery: fabric, steel wheels 6.5x16, AGM battery 70 Ah, ASSYST maintenance interval indicator, heat-insulating glazing, permissible gross weight 3.50 t. Cargo area length: 3.28 meters Hsde Agf H Iepfx Abasw Payload: 1000 kg Wheelbase: 4.35 meters The vehicle is in very good condition!

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Hjdpfe Afxrqox Abaew Tool positions: 22 MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible

Condition: good (used), mileage: 72,903 km, power: 96 kW (130.52 HP), first registration: 03/2022, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 2,930 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,000 mm, total width: 1,990 mm, total height: 2,010 mm, loading space length: 2,600 mm, loading space width: 1,690 mm, loading space height: 1,390 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, navigation system, power mirror, seat heater, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 2043 kg, Gross vehicle weight: 2800 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front and rear, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Anthracite, Metallic, Heated mirrors, Rear view camera, Type of lighting: Halogen lamp, Seat heating, Bluetooth, Engine power: 96 kW (129 hp), Engine displacement: 1995 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L1H1 Navigation Euro6 Camera Bumpers – Color, First owner, 130 hp, 3 seats!, Spare wheel, Tire type: Summer tires = Further information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Brakes: Disc brakes Axle 1: Tire size: 215/65R16; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: Coil spring Axle 2: Tire size: 215/65R15; Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring Weights Unladen weight: 2,043 kg Payload: 757 kg GVW: 2,800 kg Hodpfx As Afu Smjbaew Functional Loading area height: 56 cm Maintenance APK (Technical inspection): valid until 10/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 323 € per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Hsdpfxezuwdaj Abasw

Condition: good (used), mileage: 90,542 km, power: 110 kW (149.56 HP), first registration: 03/2021, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,810 mm, total width: 2,050 mm, total height: 2,550 mm, loading space length: 3,040 mm, loading space width: 1,750 mm, loading space height: 1,910 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/Cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1551 kg, Tare weight: 1949 kg, Gross vehicle weight: 3500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2500 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/Cassette, GPS navigation, Color: Black, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 110 kW (148 hp), Number of cylinders: 4, Engine displacement: 2299 cc, Fuel: Diesel, Euro standard: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side paneling, Roof rack: None, Side doors: 2, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat material: Fabric, Seat adjustment: Manual, L2H2 2-side door, NAP Euro 6, 1st owner, 150 hp, Tow hitch, 3 seats, Navigation!, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 2 License plate: VLF-88-G Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Hedps Ad Utzefx Abasw Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Weights Unladen weight: 1,949 kg Payload: 1,551 kg GVWR: 3,500 kg Functional Loading area height: 60 cm Maintenance APK (Technical Inspection): Valid until 03.2027 Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 2 Financial Information Leasing price: €335 per month (delivery van, 72 months); Ask for further information and conditions.

Condition: good (used), mileage: 116,591 km, power: 110 kW (149.56 HP), first registration: 12/2022, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,180 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,150 mm, total width: 2,070 mm, total height: 2,310 mm, loading space length: 2,550 mm, loading space width: 1,740 mm, loading space height: 1,680 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear-view camera - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 1983 kg, Gross vehicle weight: 3300 kg, Tow hitch, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: Blue, Rear-view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 110 kW (148 hp), Displacement: 2299 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat covering: Fabric, Seat adjustment: Manual, L1H1 150hp Euro6 RED-Edition Towbar Air Conditioning 3-seater Cruise Control!, Spare wheel = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm; Suspension: Coil spring Axle 2: Tire tread depth left: 9 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring Weights Unladen weight: 1,983 kg Payload: 1,317 kg GVWR: 3,300 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): valid until 12/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 243 € per month (delivery van, 72 months); Please inquire about further information and conditions. Hjdpfx As Ad Uu Eobaow

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Hsdpfx Abe Agt Hpjajw