Used Gesan Dv 250 for sale (28,932)

Condition: used, Year of construction: 1971, Pressure 063 t throat 250 mm stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm ram adjustment 50 mm dimensions (WxDxH) 1,3 x 2,2 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch (Ortlinghaus), manual stroke adjustment, manual ram adjustment, fix table Bslinovut T Uslxtowl as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Bwolinovvi R Ejlxtol Storage location: Nattheim

Condition: good (used), Orbital riveting machine max. riveting pressure 0.45t Bolinlov D Dn Isxtjwl max. rivet shank diameter 4.5 mm for solid material St 400 N/mm² Triggering of the working stroke with foot pedal The machine is in a clean, well-maintained condition and can be used immediately.

Condition: good (used), Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Vacuum lifter: plate lifter, with transport box -Vacuum: via compressed air - Suction cups: 5 pieces 300 x 55 mm, 10 pieces 200 x 20 mm Bjlinlxjgw Ilystowl -Load capacity: unknown -Center distance: 500 mm, adjustable -Dimensions of the lift: 2500/250/H400 mm -Transport box: 2690/390/H590 mm -Weight: total: 78 kg

Condition: used, RA/8200/X1/250 / RA8200X1250, Norgren cylinder Bolinsq S Sbuslxtswl Model: RA/8200/X1/250 Condition: Used

Condition: used, machine/vehicle number: 12130, Rotor diameter: 370 mm Rotor width: 2500 mm 71 rotor blades Bjlowbwqcsinlxtewl 1 row of stator blades Inlet: approx. 1450 x 2500 mm Drive: 75 kW

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm Belevuk Enjinlxtewl ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Condition: excellent (used), Pneumatic drill Pade model 250 Pneumatic aggregate feed Drilling depth adjustment Belowc I Uzjinlxtjwl Pneumatic material pressure Head with 8 spindles Horizontal spindle spacing 18mm Vertical spindle spacing 25mm Spindle motor 2.2kw

Year of construction: 2025, Condition: as good as new (ex-display), Available for immediate delivery, new device with warranty -Temperature 250°C -Inside WxDxH 1500 x 3000 x 2000 mm -Outside WxDxH 2410 x 3560 x 2730 mm -Content 9000 liters -Control Eurotherm Nanodac, 100 programs with 25 segments each, another 100 programs can be saved/loaded via FTP or a USB memory stick -2 circulating air fans -Double doors with safety door sensors -Overtemperature protection, Eurotherm 3216i -Control/writer with color touch display -Sturdy steel construction outside in anthracite -Inlet and exhaust air nozzles with manual flaps, -Electric version 400 V / 50 Hz / 3NPE Bwelinlolkb Ezjxtol -Increased heating output approx. 70 kW -Recess for retraction a car -Documentation, CE declaration of conformity -Electrical circuit diagram with spare parts list As a new device also available with exhaust fan and other equipment! Delivery time approx. 10 - 12 weeks. Talk to us! We offer new and used industrial furnaces, which we also convert and add to according to customer requirements. Visits to our machine hall by appointment. Furnace, furnaces, drying furnace, industrial furnace, drying cabinet, heating furnace, heating cabinet, convection furnace, chamber furnace, heating furnace, chamber convection furnace, tempering furnace, tempering furnace

Condition: used, mileage: 527,000 km, power: 162 kW (220.26 HP), first registration: 04/2018, overall weight: 11,990 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 7,100 mm, loading space height: 2,530 mm, Equipment: ABS, had accident, parking heater, soot filter, tail-lift, MAN TGL 12.220 BL 4x2. With ISO box + box, heater + cooling fan. 1,500 kg. Dimensions: 7.10 x 2.48 x 2.53 m. Wheelbase approx.: 4.80 m. Lane departure warning, spoiler, large radio, rear air suspension, cruise control, engine brake, roof hatch, comfort seat, ABS, armrests, leveling, immobilizer, RIO, AdBlue, crossbar for tow bar with air and power, 2 tie-down rails, LED lighting in the box..... Bjlinlxet Aq Eaetjwl =====German registration + single-owner===== ====Daily purchase of commercial vehicles, trade-ins possible==== ..... ==Gearbox actuator is defective, not roadworthy==

Condition: excellent (used), Year of construction: 2003, conveyor belt length: 3,500 mm, conveyor belt width: 345 mm, Manufacturer: M.A.S.S. Length: Horizontal bottom: 60 cm Diagonal: 250 cm Bwolinljwangfsxtsl Horizontal top: 50 cm Width: 34.5 cm

Condition: excellent (used), Year of construction: 2006, End milling machines type AKF 6 for right-angled notching and in the mitre area up to approx. 20°. The working stroke of the milling drum assembly can be adjusted to the profile width in seconds, which shortens the working sequence considerably High cutting speed due to high number of revolutions (approx. 4000 rpm) and large cutter diameter sturdy grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts. Manual milling feed rate Milling cutter mounting shaft is ball bearing mounted on both sides, thus ensuring smooth and vibration-free milling operation Bsljvn S H Hjinlxtewl Milling width 305 mm Milling depth 80 mm Motor 400 V / 3.0 kW Cutter-Ø 250 mm Machine is operational ready and can be seen in our store in Prague. Also we can ship the machine to your address.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm Bolisvuuknenlxtjwl column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 300 kg Belisv A Hzhjnlxtswl Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Josan generators: proven, robust quality! ‼️5-year warranty*‼️ With sockets and Siemens fuses, ATS, and much more. Available for pickup in Heilbronn. We also ship inexpensively. Just ask! Up to 1000 kW possible. All diesel engines with electric starter. 56 kW at 1500 rpm. Feel free to compare prices and ask about the price of the engines. Ask what was produced in Germany or Europe. We also offer Cummins engines for an additional charge. Top quality at a great price! We are here for you in Heilbronn. German company, German laws, and German service! Included in the price - all inclusive! Our electricians with German journeyman's certificates will help you quickly and without delay if something goes wrong. We also rent generators, so you won't experience any downtime. We call everyone back. There's a discount for orders of 10 or more. Just get in touch and we'll call you back. Emergency generator 320 kVA / 250 kW: ➡️Proven engine ➡️Proven 6-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️3-phase 380/400 V 220/230 V 50 Hz➡️AVR control ➡️Dimensions approx. 3700 mm x 1300 x 1910 mm▶️Weight approx. 2400 kg ➡️Electric starter ➡️Peak voltage protection ▶️Socket distributor with IP44 protection ➡️CE certificate ➡️With battery charger ➡️With ATS Net €19,900.00 Emergency generator 150 kVA / 120 kW: ➡️380/400 volts 220/230 volts 50 Hz ➡️AVR control ➡️Very quiet, only approx. 65 dB ➡️Dimensions approx. 2800x1100x1500 mm ▶️Weight 1390 kg ➡️Proven 6-cylinder diesel engine with 132 kW / 1500 rpm. ➡️Electric starter ➡️2 sockets, 220 V, 16 A ➡️2 sockets, 400 V, 16 A ➡️2 sockets, 400 V, 32 A ➡️1 socket, 400 V, 63 A ➡️1 socket, 400 V, 125 A ➡️Peak voltage protection ▶️Socket distributor, IP44 protection ➡️CE certificate ➡️With ATS ➡️With battery charger Net €7,900.00 Emergency generator 63 kVA / 50 kW: ➡️380/400 V 220/230 V 50 Hz ➡️Very quiet, only approx. 65 dB ➡️ Proven 4-cylinder diesel engine with 56 kW at 1500 rpm ▶️ Weight approx. 860 kg ➡️ Peak voltage protection ▶️ Socket distributor with IP44 protection ➡️ Electric starter ➡️ CE certificate ➡️ 4 sockets, 220 V, 16 A ➡️ 1 socket, 400 V, 16 A ➡️ 1 socket, 400 V, 32 A ➡️ 1 socket, 400 V, 63 A ➡️ All EU compliant (including 220 V as in Germany) ➡️ With AVR control ➡️ With battery charger ➡️ With ATS Net €5,900.00 Emergency generator 50 kVA / 40 kW: ➡️Proven engine ➡️Proven 4-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️380/400 V 220/230 V 50 Hz ➡️Dimensions approx. 2100 x 950 x 1200 Bwsliep E Egaonlxtjl ▶️Weight approx. 860 kg ➡️Peak voltage protection ▶️Socket distributor with IP44 protection ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR control ➡️With battery charger Net €4,900.00 Emergency generator 25 kVA / 20 kW: ➡️25 kVA / 20 kW ➡️Proven motor ➡️Very quiet, only approx. 65 dB ➡️3-phase 380/400V 220/230V 50 Hz ➡️Dimensions approx. 1800x900x1000 mm ▶️Weight approx. 650 kg ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR control Net €3,900.00 +19% VAT €741.00 Gross €4,641.00 All prices are net plus 19% VAT! Images include accessories at extra cost. Images may vary! Errors excepted. *Inquire about our warranty terms and conditions.

Condition: new, overall weight: 2,000 kg, empty load weight: 360 kg, maximum load weight: 1,640 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, suspension: steel, tire size: 165R13C 96/94N, total length: 1,640 mm, total width: 1,110 mm, total height: 3,810 mm, construction height: 1,110 mm, Multi-purpose trailer prepared for transporting various types of material. Wheels under the transport surface The transport surface is wider and set higher than in other luggage trailer series, making manual loading and unloading easier. All side walls are removable, so the load can be loaded freely, e.g. with a forklift truck. Underframe made of structural steel, closed profile, bolted. Floor made of high-quality, waterproof and non-slip plywood. Possibility of attaching high welded steel mesh walls. | HIGH LOADER + 250/2 2T | Steel frame | Dimensions of loading area: L: 2.54m W: 1.51m Height of side wall: 0.40m | 8 lashing rings (4 left, 4 right) recessed in the floor | Knott axle with drum brake | Leaf spring suspension | Operating voltage 12V | Spindle parking brake | Front railing | Spare wheel on front wall | Errors, input and advance sales reserved. Bwjlinleu R D Skextjl

Condition: new, Year of construction: 2025, Circulating air chamber oven, electric, new device, delivery time 12 weeks -Temperature 250°C Bwslinljv Hg Euoxtel -Inside WxDxH 2100 x 2100 x 2000 mm -Contents 8820 liters -Control Eurotherm Nanodac -Controller / recorder with color touch display -2 circulating air fans -Double door with safety door sensors -Overtemperature protection, Eurotherm 3216i -2 fresh air fans -Automatic flaps -Electric version, 400 V / 50 Hz / 3NPE -Increased heating output approx. 70 kW -Temperature accuracy +/- 6 K in empty oven -Documentation, CE declaration of conformity -Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but only covered with stainless steel sheet. This allows free access with all track widths. Alternatively, the floor can also be offered insulated (with drive-in rails to be defined by the customer). We offer new and used industrial furnaces, which we also convert and add to according to customer requirements. Furnace, furnaces, drying furnace, industrial furnace, drying cabinet, heating furnace, heating cabinet, convection furnace, chamber furnace, heating furnace, chamber convection furnace, tempering furnace, tempering furnace

Condition: like new (used), Shuffle-mix 250 mixer / aerator Bweljlnpzfjinlxtol Serial: 200-103 Stainless mixer, 250L, mobile frame, 3Ph

Condition: as good as new (ex-display), End Milling Machine Bwelinlxsrcfumjtel

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, worktable width: 1,700 mm, worktable length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Bwjlievvlyienlxtol Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: reconditioned (used), Functionality: fully functional, Rühle Frozen Meat Cutter Typ GFR 450 / 250 Bsliev Ub E Sjnlxtewl KW 5,5 4 cross cutter

Condition: refurbished (used), Year of construction: 2015, Bungartz UMOS 3624AD/250/200-GS - Delivery rate 270 m³/h - delivery head 32m - Speed 1450 1/min - Year of manufacture 2015 - goods for shipment - delivery possible against surcharge Bwslinephmkzjlxtol

Condition: excellent (used), Year of construction: 1991, pressing force: 250 t, operating speed: 240 mm/s, Used Rhodes Hydraulic 250ton Hydraulic Press for sale 250 / HDS New PLC in March 2023 - BEIJER ELECTRONICS PRESSURE 250 TONNES MAX. STROKE - VARIABLE 30 мм TO 500 мм SLIDE SPEEDS - APPROACH 240 MM/SEC Bwoliovt Agnonlxtjl PRESSING - 22 MM/SEC. RETURN - 230 MM/SEC 2 DIE CUSHIONS - FORCE 35 TONNES / CUSHION STROKE - 200 M MAX. SERIAL NUMBER YEAR OF MANUFACTURE 1991 250 TONNES MAX. 35 TONNES / CUSHION

Condition: excellent (used), CTS Type: TSS-70/130 CTS water-cooled temperature shock test chamber Type series TSS -70/130 Test chamber volume 130 liters Test chamber dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Bwoletql H Ajinlxtsl Temperature operating range: Temperature range in °C : Hot chamber +50/+250°C Cold chamber -80/+100°C Retempering of ICs < 15 min in kg 10.0 Car changeover time in sec. < 10 Max. test weight in kg 50 Temperature constancy over time in K ± 1 Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load in kW approx. 16.6 Condenser chiller water-cooled Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Feed-through Ø in mm 125 Refrigerant: R404A/R23 Weight: 950 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: refurbished (used), Year of construction: 2016, Bungartz UMOS 3624A/250/200 - Flow rate 241.2m³/h - Delivery head 13m - Speed 960 1/min - Year of construction 1963/2016 - Forwarding goods - Delivery possible for an additional charge Bwslsqhqihoinlxtsl