Used Gesan Dvs 130 for sale (9,106)

Condition: good (used), Year of construction: 2005, Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Foljtrzuqoq Dbk Aepg Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Mould Height min. [mm]: 200 Machine tested

Condition: new, knife: planer blade Z4 Flight circle (ø):: 125 mm flight circle (ø): 125 mm Drilling:: 40 mm drilling: 40 mm Length:: 130 mm length: 130 mm Fjljqz A D Uoq Dbk Aspg Material:: aluminum material: aluminum

Condition: new, Year of construction: 2023, Longitudinal x 10000 mm Vertical Y 2200 mm transverse Z 1300 mm tool holder ISO 50 Control Heidenhain TNC 640 milling head 2,5° 6000 rev. IKZ changer 60 pockets panel field 11000 x 2500 x 300 mm Folq Dbkeglpz Rs Aspg

Condition: used, Year of construction: 1982, centre height ca. 150 mm centre distance 1300 mm vorhanden diameter ca 250 mm digital readout 1x make Heidenhain u. Werkzeug-Sc serial number 63-06 Fpslqop Icp Uo Dbk Asg

Condition: new, Year of construction: 2023, operating hours: 21 h, load capacity: 4,990 kg, lifting height: 4,700 mm, free lift: 1,470 mm, mast type: triplex, power: 22 kW (29.91 HP), fork carriage width: 1,310 mm, fork length: 1,600 mm, ground clearance: 110 mm, front tire type: Vorne Continental, front tire size: 355/50-15, rear tire type: Vorne Continental, rear tire size: 21x8-9, total length: 4,470 mm, wheelbase: 2,000 mm, drive type: Elektro, construction width: 1,400 mm, net weight: 5,548 kg, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 Fpslevdxiyeq Dbk Ajg - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Fpelewgwl Doq Dbk Aog Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis / Cross-arm: 1,500 mm V-axis / Cross-column: 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Fjlq Dboq I Nlyok Aspg Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed spindle Ø 210 mm) Spindle mount: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Internal coolant supply - 36 bar Rapid traverse speeds X, Y, V & Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-station chain magazine Double-hinge chip conveyor (longitudinal) Perimetric enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: used, Year of construction: 1992, pressure 100 t chamfer lenght 3100 mm column daylight 2540 mm stroke 300 mm table height over floor 750 mm control DNC 90 total power requirement 8,6 kW weight of the machine ca. 8500 t Overall size ca. 3540x1240x2555 mm Machines type 391 Machine no.: 67 39130049 -4 controlled axes -crowning -Extended back gauge -pneumatic matrix displacement -hydraulic upper tool clamping -various tools Fpolewf Dyxjq Dbk Asg -Tool cabinet extra large stroke 300mm -various tools Machine does not have a valid UVV

Condition: new, Year of construction: 2024, machine/vehicle number: JDC 13/16, Thanks to its small external dimensions, our automatic battery-powered hand strapping machine has an ergonomic shape with ideal weight distribution for optimum handling. A 2nd lithium-ion battery is included in the scope of delivery. . Data: Stepless adjustment of the voltage 2nd lithium-ion battery Charger Tape width to be processed: 13-16 mm PP or PET tape Tape thickness: 0.4 - 1.20 mm Weight 3.35 kg incl. battery Max. Tension 60*2800N External dimensions LxWxH 340x130x118mm Working temperature 5-45C Felqjwf H Sdo Dbk Aepg Charging time approx. 90 min Lithium-ion battery 11.1V/4.0A

Condition: used, Year of construction: 1980, thickness of jaw 130 mm weight of the machine ca. 24 kg +++++ Please note: Feled N Slhsq Dbk Aspg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1995, Functionality: fully functional, SCM S52 Thickness Planer Year 1995 Manufacturer SCM Italy Ref. 070303 From a training company - in very good condition Technical specifications: Planing width 520 mm Planing height 230 mm Planer cutter block diameter 110 mm (4500 rpm) 4 planer knives Motor power 5.5 kW Star-delta start Electric table raising and lowering 4 feed speeds 2 adjustable rollers in the tabletop Upper gear shaft Rollers in the table Fpelqjwf Ac Eo Dbk Aog Anti-kickback safety device Machine dimensions: L x W x H = 120 cm x 100 cm x 130 cm 700 kg

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 20-230 mm Working height 10-160 mm Feed motor 7 kW Feed speed 5-40 m/min. weight of the machine ca. 3100 kg Weinig Powermat 700 still in use, for inspection including suction unit, pipes and motor for the suction unit ----- Brief summary Manufacturer's description: Working width: 20-230 mm Working height: 10-160 mm Spindle arrangement: Bottom: 2 pieces Right: 1 piece Left: 1 piece Top: 2 pieces Detailed description: ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 125 mm) Working height 10 - 160 mm (with tool flight circle 93 - 125 mm) 1. spindle ----- First lower horizontal spindle Motor 11 KW Diameter 40 mm Speed 6,000 rpm Tool flight circle 125 - 145 mm Tool groove circle rebate cutter 130-160 mm Axial adjustment travel 17 mm Folding device, including rebate cutter MarathonCoating for table insert in front of 1st lower spindle Electronic digital display for radial adjustment 2. spindle ----- First right vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Stop lip after the right-hand spindle with quick adjustment Pressure roller from above opposite the right-hand spindle, swivelling away and pneumatic. 3. spindle ----- First left vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Fslqewgwlwe Dbk Aopg Easily removable suction hose Two lateral pressure rollers in front of the left spindle, travelling and spring-mounted Pressure roller from above opposite the left-hand spindle, swivelling and pneumatic Adjustment travel of the feed rollers opposite the left-hand spindle, axial 35 mm Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 4. spindle ----- First upper horizontal spindle Motor 11 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm Split pressure shoe in front of upper spindle with horizontal adjustment plane, Adjustable to tool flight circle and swivelling away from the tool, pneumatic Pressure shoe before and after the upper spindle with electronic digital displays digital displays, integrated in the memory function or the PowerCom Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 5. spindle ----- Second upper horizontal spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm ...

Condition: good (used), Year of construction: 1999, Center height 550 mm Turning diameter over bed 1100 mm Turning diameter over support 830 mm Center distance 2000 mm Spindle bore 95 mm Spindle mount DIN 55027 size 11 Bed width 700 mm 21 speed settings 8 – 800 rpm Workpiece weight between centers 6000 kg Workpiece weight between centers and 1 steady rest 7600 kg Fslq Dbsv Rvztjk Ajpg Workpiece weight in 3-jaw chuck 1000 kg Feed range longitudinal 0.010 – 12.8 mm/rev transverse 0.05 – 6.4 mm/rev Rapid traverse Z/X 4/2 m/min 60 metric threads 1 – 120 mm 56 inch threads 30 – 1/4" 45 module threads 30 – 0.25 module Tailstock mount MT 6 Quill travel 300 mm Quill diameter 130 mm Drive power 27/17 kW Dimensions L x W x H 4500 x 1750 x 1700 mm Weight 7800 kg Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN • 3-jaw BISON face-to-face scroll chuck, Ø 630 mm • 1 stationary steady rest with rollers up to Ø 750 mm • Automatic top support feed • "Multifix" quick-change system, size D2 • Main drive 27/17 kW • Tailstock quill with reduction gear for quill adjustment 1:1 + 1:5 • Large, movable chuck guard • Leadscrew and feed screw guards • Machine light • Feed + rapid traverse in all axes • Coolant system • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2008, operating hours: 13,000 h, Field of application: Construction Serial number: AVO08A1388/8992 005xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20163 Specifications: - 2008 model - Engine hours: Approx 13000 - Impact hours: Approx 6500 hours Fpolqowdvg Uo Dbk Asg - Weight: 15000 kg - Machine width: 241 cm - Track width: 30 cm - Meter counter - Angle gauge - 1838 Hammer - Stand changer - Carousel - Replaced screen - Replaced engine (unsure of hours) - Repacked cylinder on swing and tilt on tower - Service performed by owner - Undercarriage (see pictures) - Lights - Radio control - Ready for delivery Description: We have a 2008 Atlas Copco D7-01 Drilling rig w/ cop1838 hammer carousel and stand changer for sale. The engine and screen on the rig have been replaced. Some cylinders on the swing and tilt of the tower have also been repacked. The rig otherwise functions as it should according to the owner. Errors and defects may occur Ready for delivery. Hours: 13000 Total Weight: 15000 Width: 241 Hammer hours: 6500

Condition: new, Year of construction: 2024, machine/vehicle number: JDC 13/16, Thanks to its small external dimensions, our automatic battery-powered hand strapping machine has an ergonomic shape with ideal weight distribution for optimum handling. A 2nd lithium-ion battery is included in the scope of delivery. . Data: Stepless adjustment of the voltage 2nd lithium-ion battery Charger Tape width to be processed: 13-16 mm PP or PET tape Fpolq Dbkjwf H R To Asg Tape thickness: 0.4 - 1.20 mm Weight 3.35 kg incl. battery Max. Tension 60*2800N External dimensions LxWxH 340x130x118mm Working temperature 5-45C Charging time approx. 90 min Lithium-ion battery 11.1V/4.0A

Condition: used, Year of construction: 1990, x-travel 1100 mm y-travel 600 mm z-travel 600 mm Control Heidenhain 355 weight max. 10 t head swivability ja ° ja table length 1200 mm table width 550 mm serial number A12055 Fpslq Dbkjwf Etyo Aog

Condition: used, Year of construction: 2017, x-travel 750 mm y-travel 650 mm z-travel 560 mm Control 3D HEIDENHAIN TNC 640 table-size 800x650 mm rotary table 650 mm table weight 600 Kg c-axis ° b-axis -120+120 ° Tool diameter 840 mm toolpiece height max. 500 mm rapid taverse 40.000 mm turning speeds 20.000 U/min Tool adapter HSK-A63 Torque 130/86 0 engine output 35 kW Internal cooling system 40 bar Machine on 26.972 Spindle hours 11.412 h total power requirement 49 kW weight of the machine ca. 11.600 kg -Tool charger -No. Positions in the tool charger 60 Folq Dbkjvw Dwvs Aepg -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain piece -Blum laser probe measuring device -chip extractor -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-510 Portable Steering Wheel

Year of construction: 2014, operating hours: 27,729 h, Condition: ready for operation (used), General Data Feljwgp Rxsq Dbk Ajpg Measurements width 6450 mm Measurements depth 11500 mm Measurements height 2350 mm Machine weight 13000 kg Additional Equipment Cutting Heads: 5“, 7.5” Steel: 25 mm / Stainless Steel: 20 mm / Aluminum: 12 mm Spinde Speed: N/A / Electrical Consumption: 51 kW This 3-axis Bystronic Bystar 3015/4400 was manufactured in 2014. Ideal for precision CO2 laser cutting, this machine maintains robust functionality despite its usage. If you are looking to get high-quality cutting capabilities consider the Bystronic Bystar 3015/4400 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 1982, Spindle diameter 160 mm Axes Fjlq Djwhpxrsbk Ajpg X 3000 mm Y 2500 mm Z 1600 mm W 1250 mm Spindle revolutions 800 rpm Machine dimensions 5900 x 12440 mm x 7620 mm Machine weight 68 000 kg Including rotary table E 20

Condition: used, Year of construction: 2005, Serial number: SWZSH13205000xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20253 Specifications: Model year: 2005 EU approved until: 04.04.2026 Wheelbase: 130 / 130 cm Tires: See pictures (6 extra tires included) Containers Remote control Frames included Tool cabinet Ready for delivery Description:Nicely used Primbox hook trailer with tipper , model year 2005. The trailer has recently been EU-approved and comes with both remote control, box and frames. In addition , 6 extra tires are included. Ready for delivery and ready for new assignments! Technical approved: Yes Fjlq Dbowdvhfok Aepg EU-approved until: 04.04.2026 Own weight: 5200 Total Weight: 28000 Payload: 22800 Width: 255 Length: 893

Condition: new, MOBILE CONCRETE BATCHING PLANT M100-TWN Csbtuhoflz Hljm N Asrb GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Fpelq Djwhyh Djbk Asg The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Condition: used, machine/vehicle number: 007749, X axis working area: 3000 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84 Fjlq Devw Evyjbk Aspg

Condition: used, workpiece length - min. 300 mm workpiece length - max. 1000 mm working lenght 250 - 950 mm clamping diameter 130 mm Inner diameter of milling head 230 / 280 mm cutting speed 120 / 160 m/min x-axis 300 mm y-axis 300 mm z-axis 1085 mm electr. connected load 3x400V / 50Hz installed capacity: 130 KVA current intensivity max. 185 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fpolq Dbksv N N U Ro Asg There are 8 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2014, Condition: ready for operation (used), General Data Measurements width 4400 Measurements depth 9350 Fpolowgp Tmjq Dbk Asg Measurements height 2200 Machine weight 13000 Movement X-Axis Movement 3080 Y-Axis Movement 1555 Z-Axis Movement 240 Max Material Thickness Steel 16 mm Stainless steel 10 mm Aluminium 6 mm Additional Equipment Automatic loading/unloading device Compact tower (pallet storage) This 3-axis LVD ORION 3015 Plus was manufactured in 2014, offering reliable performance in CO2 laser cutting. Ideal for precision work in various materials, it represents a solid choice for enhancing your cutting capabilities. Contact us for more information about this machine. Application Types Cutting

Condition: used, Year of construction: 1998, Table 1800 x 1800 mm Spindle diameter 130 mm Axes X x Y x Z ... 2000 x 2000 x 800 mm Spindle 800 rpm Max. table loading 12 t Machine dimesnions 6700 x 6000 x 4420 mm Felq Dbewhpv Rjk Aopg Machine weight 32 000 kg Control system MEFI 872 Series. Rebuilt in 1998.