Used Gesan Dp 200 for sale (43,644)

Condition: used, Year of construction: 1987, pressure 4000 kN table length 2500 mm Cgsb Emr Tjvxwi Uevst table width 2000 mm dayligth 2500 mm stroke 2600 mm tank capacity 1000 l total power requirement 56 kVA weight of the machine ca. 85 t dimensions of the machine ca. 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar

Condition: used, Year of construction: 2006, Overview  The in-line palletizer was built in 2006 by the German company Beyer and can be converted to any customer-specific crate format. Technical details  Output: max. 200 cycles/h Set up for VdF crates, the machine produces 32 bottles per cycle, i.e. 32 x 200 = 6,400 bottles per hour With a beer crate, it would be four crates of 20 or 24 bottles/crate per cycle, i.e. 80 - 96 x 200 = 16,000 - 19,200 bottles/h Machine weight: approx. 3,000 kg Power connection: 400V, 3-phase, 50 Hz Connected load: 6.6 kW Air connection: 3/8" hose connection Height 3150 mm Width: 2400 mm Length: 2500 mm Height of box conveyor approx. 800 mm Pallet transport height approx. 400 mm Support feet D = 100 mm, M24 threaded spindles Stainless steel base frame Control system Siemens Simatic S7-300 Visualization Siemens OP7 SEW frequency inverter (Movidrive MDX61B) Control cabinet IP 55, according to VDE regulations Cgeb Emrsqxk Iue Tvet

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Cob Emrevxmy No Tvjgt Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: used, Year of construction: 2017, operating hours: 3,585 h, lifting height: 1,900 mm, fuel type: electric, mast type: duplex, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,150 mm, General information Field of application: Internal logistics Serial number: 6516248 Weights Empty weight: 880 kg Battery Battery: 225 Ah, 24 V, Brand of battery Hawker Functional Lifting capacity: 2.000 kg Maximum passing height: 147,5 cm Other information Remanufactured: Yes Tyre brand: Vorne: Vulkollan tandem Hinten: Vulkollan Transport dimensions (LxWxH): 1,96x0,77x1,475 Additional information Cgob Emrou Thtmj Tvjt Please contact Karl Leitner for more information

Condition: good (used), Functionality: fully functional, mileage: 164,112 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, first registration: 09/2016, fuel consumption (combined): 4.6 l/100km, CO2 emissions: 135 g/km, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, traction control, Come and visit us at our Iperauto headquarters in Como, in via Mariano Tentorio 3. 3 SEATS - DOUBLE PASSENGER SEAT Ford Transit Connect 200 1.5 tdci 100cv Trend L1H1. Light commercial vehicle ideal for small and medium-sized businesses that need a reliable and practical means of transport. It can count on a good level of equipment and has: MP3 radio, Bluetooth, 12V and USB sockets, on-board computer, air conditioning, multifunction steering wheel, ABS, electronic stability and traction control, emergency brake assist and hill start assist; electric front windows, electrically adjustable and heated rearview mirrors, rear parking sensors, steel rims, halogen headlights, daytime running lights, fog lights and large illuminated rear cargo area with full blind bulkhead, fixing hooks, rear opening and sliding side door on the right side. Don't miss out on this opportunity! Come and visit us in Como at Iperauto! Cgsb Emrev Iq Ats Tvst The price indicated is linked to Iperauto promotions and initiatives. In some cases, the technical equipment and options may differ, therefore it is advisable to consult our sales consultants to avoid inconsistencies in the contractual phase. For other proposals, you can consult our website. Before going to one of our offices to view a vehicle, please contact us to verify the actual location and availability.

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer With separate electric and command panel Safety and sound-proof enclosure No. 1 Vertical column to support the working units Min. useful working width (mm) 220 Max. useful working width (mm) 3000 Min. useful working tickness (mm) 6 Max. useful working tickness (mm) 60 Cgjbsgz Alxs Emr Tvst Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 40 No. 3 Working groups (for each machine's side): 1 Jumping Scoring Unit Kw 2,2 / Kw 3,2 1 Hogging Unit Kw 5,5 / Kw 7,3 (RPM 3000 / 6000) 1 Jumping Milling Unit Kw 4 / Kw 5,8 (RPM 3000 / 6000)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons Cgjb Emrsgv I N Uo Tvst 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: used, Year of construction: 1999, Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included Ceb Eou Aim Djmr Tvegt

Condition: used, Year of construction: 1986, turning diameter 200 mm turning length 1000 mm Cgobeu Aw Tro Emr Tvet

Condition: used, Year of construction: 2016, operating hours: 4,085 h, lifting height: 2,100 mm, battery capacity: 375 Ah, battery voltage: 24 V, color: other, Field of application: Internal logistics Empty weight: 1.479 kg Lifting capacity: 2.000 kg Maximum passing height: 159 cm Serial number: 6464445 Tyre brand: Vorne: Vulkollan Hinten: Vulkollan tandem Transport dimensions (LxWxH): 2,31x0,79x1,59 Please contact Karl Leitner for more information Cgob Emsqmc I Ajr Tvet

Condition: refurbished (used), Overhauled Mazak main spindle VTC 200 or VTC 300 for sale. The main spindle has been completely overhauled and balanced. The maximum speed is 12000 1-min We have more overhauled Mazak spindles in stock, please send us your request. Cgob Emrjvdkdij Tvjt For further questions please do not hesitate to contact us

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Cob Emeinigmsr Tvogt Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Mod. TFU200/L/30/12/S

Condition: used, Rounding machine tool WemaProbst RHM 200 Cgeb Emr Tov Ii Tkovot

Condition: used, Year of construction: 2021, Overview This meat grinder for fresh and frozen meat, type: Laska WW 200-H was built in 2021 in Austria. It is a demo-machine with less working hours (180 hours). The machine is equipped with column loader for 200l trolleys. Throat height: 750 mm Hopper capacity: 385 liters, geometry optimized for complete emptying, screw with high rotations for regular feeding of large pieces – hinged flap for removing the screw, Double sealing system on the drive shaft for better hygiene, Extendable step with protection for better access to the loading hopper, Automatic regulation of rotational speed for the feeding screw and working screw depending on the torque. Automatic stop of the grinding screw in case of product absence, protecting the machine and preventing premature wear of the cutting unit. Electric cabinet integrated with the machine with internal ventilation reducing the risk of condensation. Operator panel with control buttons (start/stop, emergency stop) for easy operation. Throat cover with safety sensor and lock. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Electric power of the working screw drive motor: 43 kW Capacity: Fresh meat +4 degrees Celsius: 6000 kg/h (final sieve 3 mm); 9500 kg/h (final sieve 5 mm); 11000 kg/h (final sieve 8 mm); Frozen meat -18 degrees Celsius (pre-shredded blocks): 2500 kg/h (final sieve 3 mm); 3100 kg/h (final sieve 5 mm); 3500 kg/h (final sieve 8 mm) Dimensions (length x width x height): 2200 x 2000 x 2400 mm Weight: approx. 2000 kg IP56 protection class (protection against water jets and dust) Scope of delivery Grinder | LASKA | WW 200-H | 2021 Cgsb Emet H T Aper Tvst

Condition: new, controler for resistance weldingmachines Dalex Cgob Emspbbyuer Tvjt MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1 --- MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1 --- MPS 300multiR1 available from stock

Condition: used, Functionality: fully functional, machine/vehicle number: 6632091, Year of construction: 2018, operating hours: 5,098 h, load capacity: 2,000 kg, lifting height: 2,640 mm, free lift: 1,450 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, fork length: 1,200 mm, drive type: Elektro, High lift truck Chassis number: 6632091 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Description: BT SPE 200 D No.: R0518 Year of manufacture: 2018 Operating hours: 5098 Devices are sold without UVV and in their current condition! Charger on request. The device is in good optical and technical condition. Fast and uncomplicated transport possible by arrangement! The advertisement is only for identifying the device! A precise description of the condition and possible equipment is provided individually on request! Errors and prior sale reserved, sale only to traders.. all sales of used goods are made without warranty and/or guarantee. If you have not found your forklift, contact us. We have a large selection of other devices on site. Csb Emr Tevthvbjvogt Initial lift, Initial lift

Condition: used, 400 cans/hour (10 l), 600 cans/hour (5 l), zalkin dispenser, magnetic head ø 45 h: 26 mm Cgeb Emr Tsvhcz Uevot State: Renovation in 2019

Condition: excellent (used), DOUBLE LOADER, (DOUBLE CAGE) CE mark Composed of 2 single loaders (one at right and the other at left of the central rollers table) - Motorized rollers table (between the two single loaders) - Built-in electric cabinet and PLC command panel Cgob Emr Tsbgcggevet - Total installed power KW 16 General features of each loader: - Vacuum system - Top holding bars deplacement of 180° (horizontal sliding movement) - Horizontal bars for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (metal grid door) Working capacity (cycles/minute) 15 ca. Workpieces thickness (min/max) mm 12 - 60 Minimal workpieces dimensions mm 240 x 240 Maximal workpieces dimensions mm 1200 x 3000 Total installed powe Kw 16 x 2

Condition: good (used), -Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem Ceb Emr Tod In Ixjvjgt with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg

Condition: used, Year of construction: 1998, Overview This grinder, type: K&G WW 200-MM was built in 1998 in Germany. This machine is in good condition. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Power 50 kW Efficiency approx. 12000 kg/h (depends on the hole plate) Height 178 cm Width 165cm Length 105cm Weight 2000 kg Scope of delivery Grinder | K&G | WW 200-MM | 1998 Cgob Emrjumpr To Tvjt

Condition: excellent (used), With C-axis, B-axis and Y-axis Cgob Emjvvlflor Tvjt MAZAK Fusion 640M control Turning length -1020 mm Swing Diameter -540 mm Spindle speeds 35 - 5'000 rpm Tool changer with 80 positions Misc. accessories MARCELS MASCHINEN CH

Condition: used, Functionality: fully functional, machine/vehicle number: 6773986, Year of construction: 2020, operating hours: 2,342 h, load capacity: 2,000 kg, lifting height: 2,130 mm, fuel type: electric, mast type: standard, construction height: 1,550 mm, fork length: 1,200 mm, drive type: Elektro, net weight: 930 kg, High lift truck Chassis number: 6773986 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Description: BT SWE 200 D No.: R0515 Year of manufacture: 2020 Operating hours: 2,342 Devices are sold without UVV and in their current condition! Charger on request. The device is in good optical and technical condition. Fast and uncomplicated transport possible by arrangement! The advertisement is only for identifying the device! A precise description of the condition and possible equipment is provided individually on request! Errors and prior sale reserved, sale only to traders.. any sale of used goods is made without warranty and/or guarantee. If you have not found your forklift, contact us. We have a large selection of other devices on site. Cjb Emrjvthu Dj Tvsgt Initial lift, Initial lift

Condition: excellent (used), travel X/Y/Z 400/410/400 mm table clamping surface 800 x 450 mm speed 30 - 2240 rpm feeds 1 - 750 mm/rev rapid traverse 2000 mm/min Ceb Emrog Swzmj Tvjgt Tool holder ISO 40

Condition: used, Functionality: fully functional, machine/vehicle number: 6412185, Year of construction: 2016, operating hours: 1,547 h, load capacity: 2,000 kg, fuel type: electric, construction height: 1,300 mm, fork length: 1,150 mm, drive type: Elektro, Low lift truck Chassis number: 6412185 Condition: Ready for use and fully functional Technical condition: good Csb Emrsvthuqs Tvsgt Description: BT LWE 200 No.: R0513 Year of manufacture: 2016 Operating hours: 1,547 Devices are sold without UVV and in their current condition! Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement is only for identifying the device! A precise description of the condition and possible equipment is provided individually on request! Errors and prior sale reserved, sale only to traders.. all sales of used goods are made without warranty and/or guarantee. If you have not found your forklift, contact us. We have a large selection of other devices on site. Initial lift, Initial lift

Condition: excellent (used), Accessories available. Centre height 200 mm Center distance 1500 mm Turning Ø via slide 235 mm Ceb Emrofkn S Re Tvsgt over bed 425 mm over bend 470 mm Speed Stepless 45 - 2240 rpm Spindle bore 45 mm Ø of the tailstock sleeve 55 mm Morse taper of spindle and tailstock MK 4