Used Gesan Dp 200 for sale (43,656)

Condition: used, machine/vehicle number: 007491, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 6.6 KW Cob E Sjuxg S Newfhjgt Number of controlled axes: 3 axes Total number of drilling spindles: 35 Total number of tool changer positions: 6

Condition: used, Year of construction: 2010, machine/vehicle number: xxxx, Order No. 25063 Cgjbjwgd Dmo E Swfhet Technical Specifications: - Jaw width 200 mm - Jaw height 63 mm - Maximum clamping range 280 mm - Total height 150 mm - Maximum clamping force 6200 daN - Clamping range adjustment with Camlock system - Weight 78 kg - Minimum space requirement L 695 x W 200 x H 150 mm - Hand crank

Condition: used, machine/vehicle number: 3349, 2-blade double rotor 3 rows of stator blades Cjb E Swfsghgf Nehsgt Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: new, Functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Cgeb Eovnuq Is Swfhst Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: reconditioned (used), Functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2025, DGUV certified until: 05/2026, Lifting Kneader Dough Machine Diosna Extendable Kneader Model: D 200 a for max. 200 kg dough Stainless steel bowl and kneading arm Flour dust hood NEW according to HCCP 2 bowl trolleys with tilting device Stainless steel kneading arm with rotating mechanism 2 gears, with emergency stop circuit with 2 timers Stainless steel access ramp for bowl trolley DGUV V3 tested 400V connection, 32A CEE plug Used machine, overhauled 6-month warranty + service Options: Leasing & Rental Service Maintenance Agreement Service Package Delivered with floor mounting Instruction & Commissioning Many other lifting kneaders in stock! Cgebsu A Hhlo E Swfhet

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Scope of delivery: Table widening Rubber rollers with veneer edge grinding device with contact shoe with fine ice setting and stop rulers with grooved infeed ruler for veneer overhangs quick changeover from veneer edge sanding to solid wood sanding possible length (product) approx.: 1900 mm width/depth (product) approx.: 900 mm Height (product) approx.: 1350 mm Weight (net) approx.: 290 kg Power oscillation motor: 0.25 kW Suction nozzle diameter: 140 / 100 mm Height adjustment longitudinal table: 230 mm cross table height min.: 720 mm working table length: 960 mm working table width: 350 mm Working table height adjustment: 230 mm 400: Supply voltage V Phase(s): 3 Ph type of current: AC Mains frequency: 50 Hz grinding belt length: 3000 mm grinding belt width: 200 mm belt rotation speed(s): 20 m/s oscillation stroke: 20 mm grinding surface length: 1050 mm grinding surface width: 200 mm Cgsb E Swfokwhk Sjhst incl. 1 VE abrasive belts K 80 1 VE abrasive belts K 120 Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Ceb E Sscnz Rvjwfhjgt Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: like new (used), Year of construction: 2006, Functionality: fully functional, 1- Loading of logs 2 -Entry to cylinder 3 - Cylinder Diameter of rollers obtained 75-200mm Csb E Sothqqmjwfhsgt minimum length of input material 1100 mm 15kW knife head drive motor smooth regulation of forward speed + forward / backward + 1.7kW feed motor At the same time: 2 + toothed sprocket rollers Knife head 4 + 2 + smooth drawing drag rollers electrically adjustable blade head 0.25kW electrically adjustable axles 1.1kW dimensions length / width / height 3570x1300x1700mm weight around 4000kg 4-Cylinder outlet

Condition: new, 80650.000014, Atlas Copco, valve PAP 200/160 KPL. Model: 80650000014 Condition: New Cgjb E Swouizrvefhot

Condition: excellent (used), Year of construction: 2014, Traditional bag extraction sprays the finest, most harmful dust around the workshop. The Alko power unit 200 traps the finest dust in a sealed enclosure. Sawdust does not pass through the fan, but is trapped beforehand in the unit's special separator. The filters are cleaned automatically by reverse blows of compressed air, which activates the self-cleaning system to keep the exhaust performance at the same level. Changing sawdust bags is incredibly easy, just lift the cart levers and drive it out. - dimensions 2296 x 830 x 2050 mm -3KW motor -capacity 2261 m / h - filter area 13.8 m2 -capacity 2x250l Cgsb E Ssmqkxbjwfhjt -weight 470kg -volume 72 decibels

Condition: like new (used), For Sale: Pellet Mill PM-200 Pellet Mill | Pellet Press PM-200With mixing unit, material feeder, and humidification function ✅ Capacity: Feed Pellets: 150 - 250 kg/h Wood Pellets: 100 - 170 kg/h Our Pellet Mill PM-200 is a powerful and versatile machine optimized for the production of wood and feed pellets. It features a large mixing container, an adjustable dosing screw, and an integrated high-performance water pump for moisture regulation (0-5 liters per hour). Thanks to the specially developed dies & rollers, it is perfect for processing hardwood, chipboard, MDF, and other materials. Key Features: ✔ Integrated mixer & dosing screw for optimal material feeding✔ Humidification function for perfect moisture control✔ Specially developed dies & rollers for high efficiency and low motor load✔ High-quality manufacturing - Made in Germany✔ Long service life & low operating costs Technical Data: Mixer: 0.55 kW Dosing Screw: 0.37 kW Pump: 0.15 kW Cjb E Swov A R Huofhsgt Press Unit: 7.5 kW Total Electrical Power: 8.57 kW Dimensions: 195 cm (H) x 120 cm (W) x 70 cm (D) Weight: 290 kg Power Supply: 380V / 16A Drive: Electric Scope of Delivery: ✔ Pellet Mill PM-200✔ Die (Ø 6 mm) + Roller (Special Set)✔ User Manual✔ Assembly Tools✔ Power Cable with Plug✔ Fully Assembled Delivery

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 5 kW Tool clamping system: ETP 25 Vertical drilling spindles: 8 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cgjb E Swovn A D Nefhjt Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: enclosed cabin

Condition: new, Year of construction: 2025, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Cgjb E Swog Uaiujfhst Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: used, Year of construction: 2013, Please contact ATS Norway AS for more information Please provide reference number upon request: 19095 Specifications: - 2013 model - Km: 6192 - Hours: 1644 - 2m2 vacuum sweeper - 4 wheel steering - 2 brush system - high pressure washer - 40 km/h - Ready for delivery Description: An owner who has operated his own property/parking garage since new. Vacuum container leaks a little water when it is not pressurized. The protective profile around the machine is rusted and needs to be replaced, rust water from this has discolored the plastic. The cable for the emptying lever return water is stuck, must be replaced/repaired. Some scratches/damage around the machine. Cjb E Sev U Sg Howfhsgt For the most part, the machine is ok. Was in normal use until June 2024. Service carried out November 2023.

Condition: used, 80650.000014, Atlas Copco, valve PAP 200/160 KPL. Model: 80650000014 Cgeb E Swevrh Arofhst Condition: Used

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN Cgobstt Da Is E Swfhot

Condition: used, overall weight: 2,000 kg, maximum load weight: 1,540 kg, axle configuration: 2 axles, loading space volume: 2 m³, loading space length: 2,970 mm, loading space width: 1,350 mm, loading space height: 350 mm, first registration: 10/1993, total width: 1,850 mm, total height: 1,300 mm, Folding ramp wall approx. 1,490 mm long, V-drawbar, side walls made of screen printing plates, sheet steel floor, 2 rear drop supports, overrun brake, handbrake, jockey wheel, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Cgeb E Swjvnp Ihofhst We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Year of construction: 2006, Condition: ready for operation (used), Injection Unit Screw diameter 55 mm Clamping Unit Opening stroke 700 mm Distance between bars 560 x 560 mm Additional Equipment Core Valve: 1 Cgjb E Swfsupm S Nohot Air Valves: 3 EU 12 for Robot Connection: Yes This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Ceb E Swei Dfidefhsgt Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1989, Used Darley CNC press brake, type EHP 200, built in 1989 Cgob E Swfjwaymkshjt Press force: 2000 kN Working width: 5200 mm Power: 15 kW Oil capacity: 160 l Weight: approx. 20,000 kg Including tools and accessories

Condition: used, ASD 200, ULT 200.2, ULT AG, extraction system / dust extractor Model: ASD 200 Type: ULT 200.2 Condition: Used Note on condition: The cover cap of the on switch is missing. Cgjb Ejr A Dpms Swfhst

Year of construction: 2005, Condition: excellent (used), -Dimensions :3410x3350x2300mm -Dimensions:2480x2050mm -Serial number:05c061 -Year:2005 -Lhoy Tdjr I Ac Dswh Sef -Cooking surface:16.2m2 -With electronic control panel -Will run on wood, oil or GAS -Voltage:400V -Power:1kw Cgebor I Ac Do E Swfhot -Weight:11500kg

Condition: new, Year of construction: 2024, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Our welding tables are manufactured with HT 300 casting quality. All welding tables are also available in a nitrided version. • Plate thickness: 25mm All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. Cgjbsuia N Tj E Swfhot Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. 3D welding table - 3D clamping devices - 3D precision welding table

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Cgob E Sjlht H Nowfhet Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes Cob E Swfsvvx Hpjhogt only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table