Used Gesan Dp 100 for sale (42,191)

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm Cgeb Hlevx Svcsl Ndst capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Year of construction: 1999, Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Reitz, Radialventilator -Type: MXE 100-010030-00 -Engine power: 22 kW / 3000 rpm -Volume flow: 100 m³/min -Pressure increase: 1000 daPa -Connection input: Ø 275 mm -Connection: Ø 220 mm -Dimensions: 870/1220/H1210 mm Ceb Hlovy Hu Aol Ndjgt -Weight: 370 kg

Condition: used, mileage: 379,145 km, power: 162 kW (220.26 HP), first registration: 12/2017, overall weight: 10,000 kg, fuel type: diesel, maximum load weight: 3,490 kg, emission class: euro6, isothermal van with refrigeration unit carrier xarios 600 FRCX WITH MOVABLE BULKHEAD. ANTEO 17Q TAILGATE For information Cgsb Hjvikhlsll Ndjt

Condition: used, overall weight: 36,000 kg, maximum load weight: 28,143 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,737 mm, loading space volume: 92 m³, first registration: 09/2016, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 100 sliding floor +/- 92 cbm, Cargo-Floor floor with 21 boards 10 mm, stainless steel wear plate at the rear under the sliding floor, complete emptying (moving bulkhead), push-in/push-out function, KNAPEN radio remote control V1 (for floor, lifting axle, work lights), loading pressure gauge, double-wing door with espagnolette at the rear, access and standing area at the front of the body, roll-up tarpaulin, 2x storage box, work lights, ABS, EBS, SAF Intradisc Plus axle(s), disc brake system, lifting axle, support winch(s), air suspension with lifting/lowering device, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us! Csb Hjvzd Euell Ndegt

Condition: excellent (used), Year of construction: 2008, operating hours: 24,462 h, Functionality: fully functional, turning length: 753 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 52 mm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, bar passage: 52 mm, total height: 2,140 mm, total length: 3,100 mm, total width: 2,340 mm, bar diameter: 52 mm, spindle nose: Capto C6, overall weight: 8,200 kg, Equipment: rotational speed infinitely variable, Mazak Integrex 100-IVST CNC Mill/Turn Lathe Machine Type: CNC Mill-Turn Lathe with Automation Year: 2008 Control: Mazatrol Matrix Production Hours: 24462hrs Condition: Excellent Includes GL50F Gantry Loader Automatic Door Selection of Tool Holders Cromar Swarf Conveyor Ceb Hlljv D H Dro Ndegt MMS 1000 Filter System Cromar Coolant Filtration Sump Pump Fire Suppression 70 Bar High Pressure Coolant Technical Specifications Max Turning Diameter: 545mm Max Turning Length: 753mm Bar Passage: 52mm Main Spindle Drive: 11kW Main Spindle Speed: 6000rpm Spindle Nose: A2-5 Sub Spindle Drive: 11kW Sub Spindle Speed: 6000rpm Counter Spindle C Axis: 0.001° indexing Milling Spindle Drive: 5.5kW Milling Spindle Speed: 12000rpm B Axis: 225° Spindle Taper: Capto C6 X1-Axis Travel: 410 mm Y1-Axis Travel: 140 mm Z1-Axis Travel: 805 mm X2-Axis Travel: 220 mm Z2-Axis Travel: 780 mm W-Axis Travel: 790 mm ATC Stations: 40 Max Tool Length: 200mm Max Tool Diameter: 90mm Max Tool Weight: 39.2N Lower Turret: 9 Stations Coolant: 70 Bar High Pressure Coolant Machine Dimensions(excluding GL50F): 3100 x 2340 x 2140mm Machine Weight: 8,200kg GL50F Gantry Loader Specifications Cylinder Diameter: 56mm Cylinder Stroke: 33mm Max Pressure: 0.99MPa Max Loading Capacity: 49N x 2(5kgf) Loading/Offloading Conveyor Front & Rear Entry

Condition: excellent (used), IPG Ytterbium Fiber Laser Fiber Laser Here we offer you an IPG Ytterbium Fiber Laser fiber laser. IPG Ytterblum Fiber Laser Fiber Laser 90-240 VAC Type Model Name: YLP-HP-2-1500-50-100 Condition: used / used Scope of delivery: (See picture) Cgobjhr Dafj Hll Ndjt (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: reconditioned (used), > Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade. > 4 hold-down devices, new wheels and new bearings. > Machine completely overhauled and new painted. Cgsbofua Drj Hll Ndjt > Passage width of 600mm > Further details on request.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 159 h, Functionality: fully functional, working width: 1,060 mm, area performance: 8,000 m²/h, overall weight: 500 kg, tank capacity: 20 l, total height: 1,550 mm, total width: 1,060 mm, total length: 1,900 mm, water tank capacity: 250 l, battery voltage: 36 V, sweeping width: 1,000 mm, drive type: elektronisch, noise level: 67 dB, battery capacity: 630 Ah, year of last overhaul: 2023, Due to the downtime, the battery had to be completely regenerated in January 2024. It now has full capacity again. Suction hose has been replaced, as well as the sweeping roller at the end of 2023. After 13 years, the usual signs of use. See pictures Appliance has two side brushes and a detergent dispenser. Enclosed is a new set of suction lips for the suction bar. Cjb Hll Nsun H Nlodogt

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Cobevz S Sis Hll Ndegt Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Condition: used, overall weight: 36,000 kg, maximum load weight: 27,968 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,695 mm, loading space volume: 90 m³, first registration: 07/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 100 moving floor +/- 90 cbm, saddle height approx. 1250mm, "Cargo-Floor" floor with 21 boards 10 mm, stainless steel wear plate at rear under moving floor, complete emptying (moving bulkhead), slide-in/ slide-out function, KNAPEN radio remote control V1 for floor, lift axle & working lights, 13 lashing eyes per side, service door at front, loading pressure gauge, double wing door w. Double wing door with espagnolette lock at the rear, access and standing area at the front of the body, side wall protection tarpaulin, floor protection tarpaulin, roller tarpaulin, ABS, EBS, aluminum rims, BPW Eco Air HD axle(s), disc brake system, 1st axle - lift axle, air suspension with lifting and lowering device, support winch(es), storage box 2x, vehicle can be covered with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Cob Hllevnqdke Ndogt We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), Year of construction: 2006, operating hours: 43,464 h, Functionality: fully functional, turning length: 753 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 52 mm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, rotational speed (min.): 12,000 rpm, type of input current: three-phase, bar passage: 52 mm, total height: 2,140 mm, total length: 3,100 mm, total width: 2,340 mm, bar diameter: 52 mm, spindle nose: Capto C6, overall weight: 8,200 kg, Equipment: rotational speed infinitely variable, Mazak Integrex 100-IVST CNC Mill/Turn Lathe Machine Type: CNC Mill-Turn Lathe with Automation Year: 2006 Control: Mazatrol Matrix Production Hours: 43464hrs Condition: Excellent (New Sub Spindle Fitted in 2025) Includes GL50F Gantry Loader Automatic Door Selection of Tool Holders Cromar Swarf Conveyor MMS 1000 Filter System Cromar Coolant Filtration Sump Pump Fire Suppression 70 Bar High Pressure Coolant Technical Specifications Max Turning Diameter: 545mm Max Turning Length: 753mm Bar Passage: 52mm Main Spindle Drive: 11kW Main Spindle Speed: 6000rpm Spindle Nose: A2-5 Sub Spindle Drive: 11kW Sub Spindle Speed: 6000rpm Counter Spindle C Axis: 0.001° indexing Milling Spindle Drive: 5.5kW Milling Spindle Speed: 12000rpm B Axis: 225° Spindle Taper: Capto C6 X1-Axis Travel: 410 mm Y1-Axis Travel: 140 mm Z1-Axis Travel: 805 mm X2-Axis Travel: 220 mm Z2-Axis Travel: 780 mm W-Axis Travel: 790 mm ATC Stations: 40 Max Tool Length: 200mm Max Tool Diameter: 90mm Cgob Hlev D Hpnjl Ndst Max Tool Weight: 39.2N Lower Turret: 9 Stations Coolant: 70 Bar High Pressure Coolant Machine Dimensions(excluding GL50F): 3100 x 2340 x 2140mm Machine Weight: 8,200kg GL50F Gantry Loader Specifications Cylinder Diameter: 56mm Cylinder Stroke: 33mm Max Pressure: 0.99MPa Max Loading Capacity: 49N x 2(5kgf) Loading/Offloading Conveyor Front & Rear Entry

Condition: good (used), Here we offer a Binder growth cabinet incubator. Cob Hlledrv Sds Ndegt Temperature range: 0°C to 100°C 1 stainless steel rack MP controller with 2 programs with 10 sections each, alternatively switchable to 1 program with 20 sections Inner glass door Control of several time and temperature display functions Digital tuning air turbine Without harming the environment Refrigerant R134A Technical data: External dimensions max WxHxD (mm) 1034x1142x746 Internal dimensions WxHxD (mm) 800x600x500 Volume (l) 240 Max. Load (kg) 70 Type KB 240 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators Ceb Hll Njfug Anjdsgt > Upper stamping system > Protective grille > 4 cooling fans D05 > Automatic pre-blowing and demoulding

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 941.92 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch OPTIONS: time of delivery with options 2 - 3 months from order 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter Cgsb Hlljvc H Hqe Ndot • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Working hour counter € 400,- Stroke counter € 400,- Deompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € incl.

Condition: used, overall weight: 36,000 kg, maximum load weight: 28,010 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,710 mm, loading space volume: 91 m³, first registration: 04/2012, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 92 cbm, "Cargo-Floor" floor with 21 boards 8 mm, stainless steel wear plate at the rear under the moving floor, complete emptying (moving bulkhead), push-in/push-out function, remote control, loading pressure gauge, double-wing door with espagnolette at the rear, access and standing area at the front of the body, roll-up tarpaulin, ABS, EBS, "Mercedes Benz" axle(s), disc brake system, air suspension with lifting/lowering device, lift axle, LED side marker reflector lights, "haacon" support winches, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Cobjvnnpdo Hll Ndogt Please contact us!

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm Cgobogm Hwuo Hll Ndst height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, overall weight: 36,000 kg, maximum load weight: 27,968 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,695 mm, loading space volume: 90 m³, first registration: 07/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 100 moving floor +/- 90 cbm, saddle height approx. 1250mm, "Cargo-Floor" floor with 21 boards 10 mm, stainless steel wear plate at rear under moving floor, complete emptying (moving bulkhead), slide-in/ slide-out function, KNAPEN radio remote control V1 for floor, lift axle & working lights, 13 lashing eyes per side, service door at front, loading pressure gauge, double wing door w. Double wing door with espagnolette lock at the rear, access and standing area at the front of the body, side wall protection tarpaulin, floor protection tarpaulin, roller tarpaulin, ABS, EBS, aluminum rims, BPW Eco Air HD axle(s), disc brake system, 1st axle - lift axle, air suspension with lifting and lowering device, support winch(es), storage box 2x, vehicle can be covered with advertising and/or lettering Cgebjvnpy Ds Hll Ndot Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Cob Hll Neub Tqnedjgt Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Condition: gebraucht / used Weight: 1100 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Cjbeva Hi Hs Hll Ndjgt Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Cgsb Hjvba Raoll Ndjt Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), IPG Ytterbium Fiber Laser with controller Here we offer an IPG Ytterbium Fiber Laser with control. IPG Ytterbium Fiber Laser Cgebof T Rwqe Hll Ndst Type: YLP-C-1-100-20-20 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Binder incubator. Important features Model BD 115 | Standard incubator with natural convection Technical data BD 115 External dimensions: Net width 835 mm Gross height (including feet / castors) 705 mm Net depth 645 mm Gross depth (including door handle and exhaust air pipe) 750 mm Rear wall clearance (minimum) 100 mm Wall clearance to the side (minimum) 160 mm Exhaust air pipe, outer diameter 52 mm Doors Number of doors 1 Internal dimensions: Width 600 mm Height 480 mm Depth 400 mm Interior volume 115 liters Steam compartment Volume 142 liters Shelves Number of shelves 0 Number of shelves, max. 5 Maximum load per shelf 20 kg Permissible total load 50 kg Weight Weight (empty) 61 kg Temperature data Temperature range, 5°C above room temperature to 100°C Temperature deviation over time at 37°C ± 0.1 K Cgob Hloqzx Nnel Ndot at 50°C ± 0.1 K Spatial temperature deviation at 37°C ± 0.4 K at 50°C ± 0.8 K Heating time to 37°C 70 minutes to 50°C 90 minutes Recovery time after 30 sec door open at 37°C 10 minutes at 50°C 12 minutes Electrical data: BD115-230V IP 20 Nominal voltage (+/-10%) at 50 Hz mains frequency 230 V Rated voltage (+/-10%) at 60 Hz Mains frequency 230 V Current type 1N~ Rated power 0.20 kW Type: BD 115 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Cold chamber temperature range: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Cgsb Hlet I S Rhjl Ndet Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Cgob Hll Njugl H Sodst Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: 0 °C to -70 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Cable gland Ø 100 mm Refrigerant: R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature shock test chamber. with 100 liters of usable space for larger test specimens up to 30 kg. Compliant with all current international standards. Water cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Cebon Smtmo Hll Ndsgt Program control via touch panel Automatic defrost Overtemperature protection Operating hours counter Mobile version 2 test material baskets made of stainless steel Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Type: TSD-100 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.