Used Floorpul Ruby 50 for sale (82,997)

Condition: good (used), Useful cutting length: 5000 mm Max blade diam. 500 mm Cgsb E R Dst Uqkgsy Tet Pneumatic tilting of heads: external 90°/22.5° Automatic displacement of the heads

Condition: good (used), Year of construction: 2002, Weiler cylinder lathe Type E 50 Centre height 280 mm Turning over bed 570 mm Turning length 1000 mm Turning over support 340 mm Chuck diameter 250 mm Parat quadruple tool holder Turning diameter in the offset 600 mm Max. workpiece weight 1600 kg Spindle bore 66 mm Tailstock MK 5 Drive 30 kw Cgjb E R Dyjvx E U Ee Tet Spindle speeds 1 – 2500 rpm Weight 3 to

Condition: used, Max. bending length: 2000 mm Max. pressing force: 500 kN (50t) Manual backgauge Cjbsvg A Ils E R Dy Tjgt 2-hand and foot control

Condition: excellent (used), Year of construction: 2016, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg Cjb E Rjhr R Iue Dy Tjgt • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: used, Year of construction: 2010, operating hours: 18,082 h, lifting height: 4,000 mm, Equipment: cabin, MANITU MC 50 Turbo 5 to rough terrain forklift sideshift cab ! Top condition ! - Load capacity 5.000kg - Center of gravity: 600 mm - Lifting height 4.000mm - 2-fold telescope - Sideshift - Delivery possible! Accessories: - Load guard - Closed cab Csb E R Dyet Uvr No Togt - Sideshift, integrated - Work lights - STVZO - lighting - Roof window - Armrest - Additional hydraulics 1 function Tires: - 18 - 19.5 MPT front - 9.5 R 17.5 rear - The truck was always dry! - German forklift! d! - UVV new on delivery Subject to errors and prior sale!

Condition: new, Year of construction: 2024, 1 cloos welding robot qirox 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot 5 m Gasnozzle sensing, seam tracking, point editor Pedastal for robot Cloos welding machine next 452 ( 450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning tilting devices WP TS-50 Cjb E Rodkcrge Dy Tsgt load capacity/station 500 kg, swing radius 800 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: 12-14 weeks. Subject to prior sale.

Condition: good (used), Functionality: fully functional, total width: 2,950 mm, total length: 9,500 mm, total height: 2,650 mm, overall weight: 8,622 kg, Chilled water unit - chiller Brand York Model DXS45LASA46-50 Cgob E R Dyovzub Tj Tot Power 829kW Dimensions: 9.5x2.95x2.65 m Weight: 8.622kg

Condition: excellent (used), Year of construction: 2011, pressing force: 50 t, working range: 1,600 mm, 1 Used Very Clean Bystronic 1.5metre x 50ton cnc pressbrake for sale - hydraulic down stroke Ceb E Revq N Hce Dy Tsgt Description Year 2011 Pressure 50 ton Bed length: 1.6metre / 1600mm stroke 150 mm Cnc control: CYBELEC DNC 880S 4 axis in total Quick release tool clamps Total power requirement 5,5 kW Weight of the machine 4800 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 1,735 h, Functionality: fully functional, machine/vehicle number: Serial N RS504958, power: 60 kW (81.58 HP), Heavy duty four shafts shredder with stand and screen In very good working orders with teeth sharpened recently and all electric panel in good condition Csb E R Djpiufzsy Tegt Serial N RS504958 60KW, 400V, 50Hz

Condition: excellent (used), MACHINE IN VERY GOOD CONDITION. FREE LOADING. Cgsb E Rovznc Ro Dy Tst

Year of construction: 1994, Condition: ready for operation (used), Working pressure working chamber/ double jacket: 2.5/2bar, with documentation and accessories, on-site inspection is possible, videos not available. Cob E R Dsrp E Ncoy Tsgt

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder Cgeb E Rovcxhgj Dy Tst -Milling holder: SK50 holder 2 pieces -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 m -Weight: 23.5 kg

Condition: reconditioned (used), Fully refurbished and tested. Very good condition. Cgjb E R Dsuccrksy Tst Complete with tools for bowl cyclone foundation plate vibration damping feet owm - operating water module controlcabinette (not tested or reconditioned)

Condition: ready for operation (used), Year of construction: 2007, Two Velcorin cold sterilization systems for the bevarage industry are available. 1) Velcorin II G B5 MID 50 C, year of manufacture: 2007, min./max. flow rate: 7000l/23000l/h, recommended min. beverage quantity for high dosing accuracy: 85l/h, max. directional flow rate: 504hl/h, dosing pump type: MTV 2.13/17, dosing accuracy: 20ml Velcorin/hl, sterilizing agent: dimethyl dicarbonate (DMDC, E242). Max. Beverage line pressure: 6.5bar, max. beverage line temperature: 150°C, max. power consumption: 2000VA, operating pressure: 4bar-8bar. 2) A defective Velcorin VDT 50 L. The screen and the vent screw are defective on this machine and cannot be repaired. The machine is available as a defective spare parts carrier. Both machines have touch panels. Documentation available. On-site inspection is possible. Cjb E R Dyjuzlhne Tsgt

Condition: excellent (used), operating hours: 1,400 h, FESX510S-34C-50 with only 1400hours runtime. Complete system with rigg, piping, cables, control, starter and motor. Very good condition. Cgjbjuccu Sj E R Dy Tot

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, screw diameter: 30mm, injection volume: 101cm³, injection weight: 92g, injection pressure: 1488bar, clamping plate dimensions X/Y: 540mm/540mm, distance between tie bars: 321mm, mold opening: 350mm, mold height min./max.: 200mm/550mm, weight: approx. 2300kg. Including 1 hydraulic core puller. Cjb Ejtw Dure R Dy Tjgt

Year of construction: 2018, Condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Cgob E R Djtxb Avoy Tet

Condition: ready for operation (used), Year of construction: 1998, Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible. Csb Eevf Iz Uo R Dy Tsgt

Year of construction: 2006, Condition: ready for operation (used), Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible. Csb Eouzyafs R Dy Togt

Condition: ready for operation (used), Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible. Cgob E Rou Av D Ns Dy Tjt

Condition: ready for operation (used), Format: 0.5-1l, max. output: 5000 cartons/h, with cap applicator and EURO-LINE cartoning machine, an on-site inspection is possible. Cgsb E Rsrviq Hj Dy Tjt

Year of construction: 1999, Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool holder: SK40, feed X/Y/Z: 10m/min, rapid traverse X/Y/Z: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, T-slot spacing: 63mm. Tool positions: 16, max. tool length: 290mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2500mm, weight: approx. 3500kg, control: MillPlus. Documentation available. On-site inspection is possible. Ceb Esu T Rile R Dy Tsgt

Condition: ready for operation (used), Year of construction: 1979, Four Bihler GRM-50 are available, year of manufacture: 2x 1979, 1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Cgob E R Dyetvar Is Tet

Year of construction: 2019, Condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Cgsb E R Dysrk Rxqj Tjt

Condition: ready for operation (used), Year of construction: 1993, An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible. Cgjb E R Dyjuml S Nj Tjt