Used Floorpul Ruby 50 for sale (82,997)

Condition: used, Functionality: fully functional, machine/vehicle number: H2X388C00035, Year of construction: 2012, load capacity: 5,000 kg, lifting height: 4,760 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X388C00035 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tires type: solid rubber Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires condition: 80 - 100% Battery voltage: 80V Battery manufacturer: Linde Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Cjb Hk Revyax Iep Tsgt 3rd valve, 4th valve, rear work light, front work light, heating, STVZO, full cabin,

Year of construction: 2019, operating hours: 34,933 h, Condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Csb Hkjvw S Rwe Rp Tegt Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: used, Air cooler, evaporator, cold store, refrigerated container, cold cell -Fan Diameter: 500mm -permitted Operating pressure: 8 bar -permitted Operating temperature: 100 °C -Pressure to minus temperature: 21 bar/ -60 °C -Content: 13.2 liters -Slat spacing: 7mm -Number: 2x cooler available -Price per piece -Dimensions: 1350/740/H700 mm -Weight: 174kg/pcs Cjb Hsb Nx Hlok Rp Tsgt

Condition: good (used), Manufacturer Jung Type HF 50 RD Control conf. Axis displacement X axis 500 mm Y axis 200 mm Z axis 400 mm Cob Hkjip Dnfe Rp Tsgt grinding spindle Speed variable 1000-4000 RPM To belong Cooling oil system with belt filter settings. Variable speed Sony digital 2-axis Magnetic plate

Condition: used, Year of construction: 2019, operating hours: 917 h, load capacity: 5,000 kg, lifting height: 5,890 mm, free lift: 2,000 mm, mast type: triplex, power: 55 kW (74.78 HP), fork carriage width: 1,350 mm, ground clearance: 200 mm, front tire type: Solidale, front tire size: 300-15, rear tire type: Solidale, rear tire size: 250-15, total length: 5,600 mm, wheelbase: 2,050 mm, engine type: VW CPY, drive type: Diesel, construction width: 1,440 mm, net weight: 7,160 kg, Diesel forklift Linde H 50 D/394 Drive Diesel Year built 2019 Lifting height (mm) 5,890 Lifting weight (kg) 5,000 Cob Hk Revix Erep Tsgt

Condition: good (used), grinding length: 500 mm, grinding width: 200 mm, grinding wheel diameter: 225 mm, distance table to spindle center: 350 mm, type of input current: three-phase, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 1,800 kg, power: 4.7 kW (6.39 HP), space requirement length: 2,570 mm, Equipment: documentation/manual, rotational speed infinitely variable, Vial grinding machine JUNG Cgsb Hk Rjrblx Rsp Tjt infinitely variable cutting speed up to 35m/min. with suction, and with coolant device

Condition: new, angular steel - leg outwards -- mm double T-iron on the x-axis -- mm U-iron on the x-axis -- mm 50 mm 150 mm throat 120 mm total power requirement 1,5 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility Cjbsu Rt Syj Hk Rp Tegt - 3 driven rollers - Supplied with a standard roller set - Foot pedal

Condition: used, Functionality: fully functional, machine/vehicle number: 515051017163, Year of construction: 2008, load capacity: 1,000 kg, lifting height: 3,000 mm, free lift: 1,460 mm, fuel type: electric, mast type: duplex, construction height: 2,070 mm, fork length: 790 mm, drive type: Elektro, Electric 3-wheel forklift Fahrgestellnummer: 515051017163 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Battery Volt: 24V Battery Ah: 625Ah Battery year of construction: 2015 Description: Still RX 50-10 No.: R0375 Year of construction: 2008 The device is visually and technically in normal condition. Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All sales of used goods are subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Sideshift, Cjb Hsuhxvcok Rp Togt 3rd valve,

Condition: used, Functionality: limited functionality, Year of construction: 2016, operating hours: 2,700 h, load capacity: 5,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: standard, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Condition: Not ready for use Technical condition: Poor Description: Rear axle defective Sideshift, 3rd valve, heating, full cabin, Cgsbsu Nn Uae Hk Rp Tjt

Condition: good (used), Cap. 600 x 200 mm. With cooling and digital Cjb Hk Rporx Skwo Togt

Condition: used, Year of construction: 1996, operating hours: 35,000 h, Functionality: limited functionality, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 18,000 rpm, overall weight: 4,000 kg, For sale is a 5-axis machining center of the DMU brand and type 50 5 The machine comes from a vocational school, is in good condition and very well maintained Please note in particular that the spindle has only 2,000 hours, 18,000 rpm and the IKZ system Technical data Year of construction: 1996 Operating hours: 35,000 h Spindle replacement: 33,000 h Spindle hours: 2,000 h Spindle holder: SK 40 Control: Heidenhain Mill Pluss Max. speed: 18,000 rpm Working range x/y/z: 500/380/380 mm Rotary table: 500*380 mm Installation dimensions L/W/H: approx. 4,000/5,200/2,400 mm Weight: approx. 4,000 kg On request, for an extra charge, can be delivered throughout Europe Prices plus VAT Cgjb Hk Rpery Tn Eo Tst Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Boring power 50,0 mm bore capacity in cast iron 60,0 mm bore stroke 230 mm thread dia. bis M 36 M table surface area 550 x 550 mm throat 400 mm Cgebeixmkzo Hk Rp Tjt turning speeds 54 - 1032 U/min morse taper MK 4 feed 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width 30 mm column diameter 200 mm engine output 4,0 kW weight 720 kg range L-W-H 600 x 1600 x 2450 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Condition: used, Year of construction: 2023, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP Cgeb Hk Rpot U Sc Ds Tet - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: used, Pneumatic cylinder -Type: ADV-25-50-A -Max.: 10 bar -Price: per piece Cjb Heb A Sgqek Rp Tsgt -Number: 4x available -Weight: 0.3 kg

Year of construction: 1992, Condition: good (used), machine/vehicle number: 92-2083, Twist drill grinding machine Offer number: 20063 Make: SCHANBACHER Cgeb Hjfhy N Sek Rp Tst Type: S 3-50 machine no.: 92-2083 Year of construction: 1992 Technical data: - simple service - Grinding process by means of gear motor - Twist drill dimensions 3 - 50 mm - acute angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - Geared motor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device

Condition: good (used), GR. Grinding length: 500mm GR. Grinding width: 200mm Table movement - longitudinal movement: approx. 600mm space requirement: 1800 x 1400 x 1650 mm Cgeb Hk Rsin Np Ejp Tst approximate weight. 1500kg With cooling system

Condition: good (used), Year of construction: 2004, operating hours: 39,000 h, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: Heidenhain Mill Plus IT, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx 500 mm ⌀ Cobetyit Es Hk Rp Tegt Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, drill diameter 3 - 50 mm Cgob Hsrl U Nqok Rp Tet drilling length 500 mm lip angle 90 - 140 ° weight of the machine ca. 120 kg dimensions of the machine ca. 850 x 600 x 1300 mm

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Manufacturer: Lenzkes, clamping claw clamping jaw Cgsb Hkju N Sgme Rp Tot -Type: Backe 3 JSG -Clamping jaw: 100 x 50 mm -Clamping height: max. 210 mm -Groove width: 32 mm -Dimensions: 255/100/H120 mm -Weight: 10.7 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm Csb Hjuzvzxjk Rp Togt - Weight approx. 3500 kg

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,500 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Technical data: Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Ceb Hsu Unh Ijk Rp Tsgt Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2000, Condition: used, pressure 230 t chamfer lenght 5000 mm distance between columns 4050 mm 800 mm 500 mm 300 mm 600 mm BC 45 Grafik 18,7 kW Cobsh Dxw Uo Hk Rp Tsgt 22,0 t 6,0 x 2,2 x 3,75 m - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm Ceb Heq Ev R Sok Rp Tjgt - Weight approx. 150 kg

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4 mm/U spindle turning speed range 190 - 1900 U/min column diameter 175 mm Cgeb Hkon Ea Twe Rp Tst table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Year of construction: 1985, Condition: good (used), machine/vehicle number: 013125, Offer 21283 Technical data: - Grinding wheel diameter approx. 500 mm - grinding wheel width approx. 50 mm - grinding wheel bore approx. 127 mm Cjb Hksi Daw To Rp Tjgt - wheel speed 950 rpm - drive 400 V / 3,3 kW - working height approx. 800 mm - working depth / protection depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg