Used Valtra/Valmet 6900 for sale (185)

Year of construction: 1980, Condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition tractive force: 25000 KG clearing length: 2000mm wheel positions: 3 pieces Distance between the wheels: 160mm diameter of the drawing heads: 3 x Ø 100mm Clearance width between the cylinders: Nominal size 500mm passage width between the cylinders measured: max. 590mm Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min Return speed: hydraulically infinitely variable from 5 to max. 25m/min Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 22 KW Accessories / special equipment: Bjb E Hjdffzfjvadjwl The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable). The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Condition: good (used), Column-guided band saw fully automatic METORA type VMB 305 DS only for 90° cuts Bwsb E Hofd U Tbsvadsl Machine number 4690022 Cutting range round Ø 300 mm Square 305 x 305 mm Saw band speed approx. 25-108 m/min. stepless Material inlet height approx. 570 mm Hydraulic drive power 1.5 kW Drive power saw motor 4 kW Mains connection 400 volts, 50 Hz Strap dimensions approx. 4900 x 41/ 32 x 1.3 mm - Fully hydraulic band saw in two-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Infinitely adjustable lowering speed - Hydraulic vice clamping, bundle clamping - Hydraulic unit integrated in the machine base - Coolant device with cooling lubricant pump for water emulsion -with chip conveyor for removing the cutting chips (not shown) - Year of construction subject to change

Condition: used, Manufacturer: Demag Type: V42 S Year: 1984 Load capacity: 5000Kg Engine: Deutz/MWM 37,5 PS / 27,5 kW Transmission: manual Operating hours: 1107 (read off) Hook height: up to 6600 mm Outreach: 6900 mm Dimensions: 4500 x 2150 x 2300 mm (LxWxH) Own weight: 7500 kg Features: - Parking heater Sale EXW free loading ex warehouse Hessisch Lichtenau. The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. Bwsb E Hvaeuhv Hxjdsl

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, warranty duration: 24 months, power: 12 kW (16.32 HP), nominal power: 11.03 kW (15.00 HP), For sale, brand-new IMX 1T5 mini-excavator from 2024, KUBOTA D902 engine with standard boom offset, standard VARIABLE TRACK CHASSIS and side joysticks. 3-cylinder, 4-stroke, liquid-cooled, EURO 5-compliant engine. Equipment in STOCK. 20 CM and 40 CM GODETS FREE! Price: 13,890 euros ex VAT // 16,668 euros inc VAT Equipment GUARANTEED for 24 months (spare parts) Delivery possible throughout France. Operating weight: 1,450 kg Variable track width : from 95 to 120 cm Breakout force: 1,600 kg Arm lifting capacity: 600 kg Digging depth: 190 cm Engine: KUBOTA D902-EF08 Motor power: 15 HP (11.8 kW) - 2300/min Pump: Triple hydraulic pump Beb E Hsvfnxmjvadswl Hydraulic flow: 28.5 liters/minute Engine displacement: 898 cm³ Travel speed: 3 km/h 360° rotating turret Digital operating hours counter (hour meter) Digital fuel gauge Standard offset boom foot Variable track as standard Reinforced canopy Auxiliary hydraulic line as standard > Photos and videos available on request > We offer a wide range of optional accessories: Hoe, hydraulic auger, grabber, rake, cleaning bucket, etc. > Financing available for private and professional customers IMX mini-excavator, French market leader in micro-excavators. We have numerous customer references: over 400 companies and individuals have already placed their trust in us! The IMX brand belongs to SARL IMEX-CO, based in Lyon. SIRET : 88278919100013 - 882 789 191 - RCS Lyon - Tour Part-Dieu, 129 rue Servient, 69003 LYON.

Condition: new, Model: F 20.F Dimensions: 6.058 mm x 2.438 mm x 0.650 mm Bwsbsgl Az Ee E Hvadel Holding tanks Construction: Self-supporting construction with an additional internal lattice frame Side walls: Trapezoidal sheet metal welded to the structure, material thickness 2nn S235 Roof: Sheet metal welded to the structure, material thickness 2 mm S235 Corner: Standard welded, thickness 6 mm S 235 Service opening: 2 X Size: 600 X 600mm Inlet - outlet opening: 2 X placed laterally 250x250mm, supports 110mm Exterior coating: Two-component epoxy paint Hempadur 45 143 Internal coating: Epoxy coating, supplemented by asphalt coating on the weld seams The waste holding tank must be placed on a solid base at six points under the container feet. be set up. The waste holding tank can be buried in the ground. In this case it is It is necessary to level the bottom of the pit with gravel. All prices are net prices plus VAT. EXW central warehouse 76461 Muggensturm AZ 6900 Please only inquiries from Germany / Austria and Switzerland. Please only inquiries from Germany / Austria and Switzerland.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning length: 1,000 mm, This EMCO E 200 cycle lathe is supplied with a collet chuck, three-jaw chuck and various tool holders. Bjb E Hvot R Rg Tjadewl

Condition: used, mileage: 61,000 km, power: 124 kW (168.59 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 13,300 kg, empty load weight: 6,400 kg, number of seats: 3, first registration: 10/1979, next inspection (TÜV): 06/2025, Equipment: all wheel drive, trailer coupling, Three-way tipper 3.80 m, all-wheel drive + coaster, 1st hand, total weight 13300 kg, unladen weight 6400 kg, payload 6900 kg, trailer coupling Maul, after optical paintwork has been carried out, it would be possible to issue an H license plate, German registration There may be lettering on the vehicles. Mileage according to speedometer Vehicle is preferably sold to traders or exporters, private sale subject to reservation Sale without warranty Bjb E Hvstvzg Toadowl Net price for export Net: 19.800 EURO + (19 % VAT) 3.762 EURO = Gross: 23.562 EURO The above information is non-binding, subject to errors/changes and prior sale!

Condition: good (used), mileage: 439,000 km, Year of construction: 2000, Equipment: crane, 2 axle 150ptt truck, set up with 4.54x2.55m three-side tipper body, payload 6900kg, Heila 100 series crane with 2 hydraulic extensions, 4 outriggers, crane and tipper set-up year 2007, manual transmission, rear air suspension. Bob E Hvst Rg Iasadewl N.B. Please note that the vehicle description is to be considered indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the exact correspondence of the data.

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, grinding length: 1,500 mm, grinding diameter: 400 mm, Technical data - grinding length [mm] - 1500 Bweb E Hvaovga Ayodjl - grinding diameter [mm] - 400 - range of table speed [mm/min] - 0 - 10 - smallest table travel [mm] - 0,001 - taper in tailstock sleeve {Morse no.] - 5 - grinding wheel dimensions [mm] - 500x80x203 - power of grinding wheel drive motor [kW] - 11 - power of grinding wheel drive motor [kW] - 3,5 - overall dimensions [mm]: length - 6650 width - 2300 (without desktop) height - 1800 - weight of machine tool [kG] - 6900 - central lubrication system; - Mitsubishi control system; - movement of the grinding wheel headstock - application of ball screw and servo motor; - table travel - use of ball screw and servo motor; - headstock of the workpiece - use of a new motor along with stepless speed control controlled from the operator panel; - "electronic wheel" for precise raids in both servo X and Z axes, e.g., for set-up work; We also make machines with Siemens 828D or 840Dsl control. It is possible to make machines up to a grinding length of 2000 / 2500 / 3000 mm.

Condition: used, Functionality: fully functional, Ohaus PA413C Precision Balance Max 410 g. Digital balance 410g x 0,001g Units of measurement mg, g, ct, oz, dwt, tical, tola, mommes, baht, grain, mes-ghal, newton, ozt -LCD screen -RS232 interface -Counting of parts -Percent Wrighing -Automatic weight calibration function -Rechargeable battery (internal) with adapter, -Measuring tray size Ø120 mm, - Body dimensions 196 x 287 x 32 mm (6900 g), Bjb E Hvst Ab Ryjadewl The unit is supplied with a windproof glass cabinet, AC adapter. Good working condition. Please check out our other listings as well.