Used Doosan D50S-5 for sale (254)

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,200 h, load capacity: 9,000 kg, lifting height: 3,100 mm, fuel type: diesel, Equipment: cabin, Diesel forklift Dwodpfsvfp Rdox Af Sja Machine make: DOOSAN Designation: D90S-5 Manufacture year: 2012 Meter readings (mtg): 8235 Unladen weight (kg): 12197 Lifting capacity (kg): 9000 Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel After a major maintenance overhaul for more than €7,000 - new tires - new forks - regeneration of cylinders, - gearbox: discs + sealants - brakes: discs and bearings - all oils, fluids and filters Technical condition: used, very good

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m Dedpfxevzln Rj Af Sjwa The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, color: orange, Year of construction: 2017, operating hours: 6,300 h, Empty weight: 23.500 kg Track width: 60 cm Dsdpozi Ecaefx Af Sswa Digging depth: 10.795 m

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, Dsdpfx Ajzqtb Hjf Sewa min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 7,410 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Dwjdpfx Afszb I U Dj Ssa Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,640 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Dwodpfx Afoxqfb Eo Ssa Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks

Condition: used, lifting height: 4,650 mm, Year of construction: 2016, operating hours: 8,650 h, Year of manufacture: 2016 Empty weight: 8.500 kg Dwodpsy Nw Abefx Af Sea Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 76 mm, total width: 2,210 mm, total height: 2,480 mm, overall weight: 12,700 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 4,050 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details. • Number of axes: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Swing over bed: 800 mm • Swing over saddle: 620 mm • Max. turning diameter: Upper turret 390 mm; Lower turret 300 mm • Recommended turning diameter: 255 mm • Max. turning length: 350 mm • Main/left spindle motor power (30 min / cont): 26 / 22 kW • Main/left spindle nose: ASA A2-8 • Right/sub spindle max. speed: 3500 rpm • Right/sub spindle motor power (30 min / cont): 26 / 22 kW • Right/sub spindle nose: ASA A2-8 • C-axis indexing (C1 & C2): 360° in 0.001° increments • Upper turret travel (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Lower turret travel (X2/Z2): 190 / 900 mm • Sub-spindle B-axis travel: 810 mm • Rapid traverse (X1/X2): 20 m/min Dwodeznwf Dopfx Af Sea • Rapid traverse (Z1/Z2/B): 24 m/min • Rapid traverse (Y): 7.5 m/min • Turret stations: 24 total (12 upper + 12 lower) • Tooling type/interface: BMT65P • Indexing time: 0.2 s • Rotary tool spindle speed: 4000 rpm • Rotary tool motor power (15 min / cont): 5.5 / 1.5 kW • Machine electric power supply: 95.77 kVA Additional equipment • Chip conveyor • Various static tool holders • Rotary live tool holders • Chucks on both spindles Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, functionality: fully functional, Key features of the DOOSAN T4005 Drill Tap Center may include: High Precision: The DOOSAN T4005 Drill Tap Center is engineered for precise drilling and tapping results, delivering consistent quality in manufactured components. High-Speed Spindle: Featuring a powerful, high-speed spindle, the machine efficiently processes various materials—such as metals, plastics, and composites—while maintaining productivity. Multi-Axis Capability: Many DOOSAN T4005 models are equipped with multiple axes, enabling complex machining operations and greater flexibility in component production. Automatic Tool Changer: The machine often includes an automatic tool changer, allowing for smooth transitions between different tools and minimizing setup times to enhance efficiency. User-Friendly Interface: The CNC system typically offers an intuitive user interface, simplifying programming, process monitoring, and operation for users at all experience levels. Djdpfx Afoy Sv Tqo Sjwa Robust Construction: Designed for industrial use, the machine is built with high-quality materials and components to ensure durability and continuous operation. Customization Options: Depending on the manufacturer, the CNC machine may offer various customization options to adapt to specific machining or production requirements.

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,880 h, Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Dedjyn En Uspfx Af Sowa = Additional options and accessories = - Rubber tracks

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 7,150 h, Year of manufacture: 2017 Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = Dwjdpjxqfhlefx Af Sja - Rubber tracks

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor Djdpfx Afjzpw Dps Sewa 12 tool holders, including 4 powered tool holders (2/2)

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,320 h, Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dwodpfx Afozb Nc Ne Sja Dimensions (LxBxH): 900 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = - Central lubrication

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,310 h, Equipment: air conditioning, Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = Dodpfx Afozb Ndte Sswa - Central lubrication

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Dwjdpey Takijfx Af Ssa Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2014, operating hours: 240 h, fuel type: diesel, color: white, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Generator capacity: 417 kVA Current frequency: 50 Hz Voltage: 380/400 Manufacturing country: United Kingdom Dwedpfxoyiltdo Af Ssa

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Spindle power 24Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, Djdpfx Afjzbkm Nj Sowa through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control.

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z 800 x 450 x 510mm, Dwodpfxezbhv Is Af Soa table size 1000 x 450 mm, table load 600KGS, spindle taper BT40, spindle speed 12,000rpm, 30 station ATC, spindle power 18.5/11Kw, Through spindle coolant, Siemens 828D control

Condition: used, Year of construction: 2005, functionality: fully functional, Very well-maintained machine, regularly serviced and in good condition. - New B-axis spindel installed in 2025 - Includes a large number of tool holders, both live tooling and static tooling. - Bar feeder included. Dwjdpjzh Rhfjfx Af Ssa - Gantry loader included. - 80-position tool magazine with Capto C6 tooling. The machine can be inspected under power and in production until 17 July.

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, Dsdpfxowq Iwxo Af Sewa 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 570 mm Dwsdpfszhc Anex Af Sea Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 150-660 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 15000 rpm; 10 - 17 kW; ISO 40 - DIN TABLE SIZE: 1300 x 570 mm MAX ADMITTED LOAD: 1000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 80 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 3110 x 2413 x 2985 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Dedpfx Afst H Nbus Sjwa Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: excellent (used), Year of construction: 2021, operating hours: 4,236 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-MB5, workpiece height (max.): 450 mm, workpiece diameter (max.): 550 mm, workpiece weight (max.): 400 kg, total height: 2,900 mm, total length: 3,400 mm, total width: 2,700 mm, table load: 400 kg, rotary table diameter: 500 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,102 h, coolant supply: 70 bar, distance table center to spindle nose: 550 mm, spindle motor power: 11 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 75 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 5-axis vertical machining center with FANUC CNC, optical scales on the x-y-z axes, 60-place tool magazine and 70 bar pump and TS27R tool pressure probe + MP60 probe Dwjdezfp U Eopfx Af Ssa

Condition: excellent (used), power: 35 kW (47.59 HP), fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Dwjdsyrigvepfx Af Sja Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), power: 35 kW (47.59 HP), fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 Compressor – 3000 RPM – 8.6 bar – 35.5 kW – Weight 750 kg – 687 operating hours – with new hoses and hammers = Further information = Year of manufacture: 2022 Intended use: Construction Dwodpfx Afex Scpls Sea Serial number: TK4755FX6NY445791 Manufacturer: Doosan Bobcat Emea CZ Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.