Used Caterpillar Ec30N for sale (519)

Condition: good (used), power: 96 kW (130.52 HP), fuel type: diesel, color: yellow, first registration: 10/1993, Year of construction: 1993, operating hours: 18,012 h, General information Model year: 1993 Field of application: Construction Serial number: 3XK01056 Technical information Number of cylinders: 6 Empty weight: 24.000 kg Functional Working width: 298 cm Condition Technical condition: good Visual appearance: average Financial information Gujlhcewr Udhecqtjc Price: On request Other information Track width: 298 cm Additional information Please contact Ernst van Hek for more information

Condition: used, Year of construction: 2019, operating hours: 9,554 h, Empty weight: 51.000 kg Dimensions (LxBxH): 1185 x 365 x 365 cm Serial number: 640 Condition undercarriage: 80% Guelswrwyrshccqtjc Caterpillar 349FL Excavator, 2.851 Engine idle hours, 6.703 Actual working hours, E-rops cab with air conditioning, 6 cylinder turbocharged Caterpillar C13 ACERT Technology engine with 425HP (317kW), EPA Compliant, mono boom, stick length 3.90 Mtr, Reach boom length 6.90 Mtr, Heavy Lift, pre-wired for GPS, GP Cat bucket with teeth, bucket capacity 3.82 M3, TB linkage family, Cat undercarriage on average 80% remaining, New top rollers, 900mm triple grouser track shoes, rear view camera, work lights, operating weight 51,000 Kg. Machine comes straight out of work and is in clean condition. Inspections are welcome.

Condition: good (used), Year of construction: 2000, frequency: 50 Hz, For sale is a used generator set with gas engine in good condition. Technical data: Manufacturer: Caterpillar Engine: Caterpillar 16 cylinder bi-turbo diesel water-cooled. Guelewr Dupshccqtsc Type No.: 3515 SITA Output: 1300 KVA / 1043 KW RPM: 1500 rpm Frequency: 50 Hz Voltage: 230/400 volt Year of construction: 2000 - Incl. control cabinet - Incl. heat exchanger - Incl. circuit breaker - Delivery possible at extra charge.

Condition: used, Year of construction: 2007, Ideal for working in confined spaces, for heavy work and loads, the undercarriage corresponds to the CAT 330D, mono boom, stick approx. 3200 mm, hydraulic quick-change system / with swivel device, hammer control, grapple control, bucket approx. 1700 mm / wide, base plates 850 mm, air conditioning, vehicle can be covered with advertising and/or labeled. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Golhccqewr Srijtsuc

Condition: used, Year of construction: 2021, operating hours: 1,703 h, 2021 | Caterpillar 303.5E2 CR with 3 buckets | Used Mini Excavator < 7t | 1703 hours 📍Location: France, La Frette 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 39500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 71 inspection points 70 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good condition, little play, see details below. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37146 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Guslhowrkc Hoccqtoc

Condition: excellent (used), Functionality: fully functional, power: 130 kW (176.75 HP), empty load weight: 17,800 kg, Year of construction: 2018, operating hours: 3,953 h, Equipment: additional headlights, adjustable boom, air conditioning, cabin, hydraulics, CAT M318F ZSA/Auxiliary hydraulics/Hydr. SW/3953h - Manufacturer: CAT - Type: M318F - Year of construction: 2018 - Operating hours: 3953h - Weight: 17.800kg - Power: 130kW - Hydraulic quick coupler - Additional hydraulics - Hammer grapple - Adjustable boom - Central lubrication system Geljviuhishccqteuc - Backhoe bucket 75cm - F.O.P.S. stone guard - Dozer blade - Fast and slow - All-round camera - Auxiliary headlights - AdBlue - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs declaration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: refurbished (used), Year of construction: 2024, Functionality: fully functional, overall weight: 1,050 kg, total length: 984 mm, total width: 630 mm, total height: 650 mm, battery capacity: 750 Ah, battery voltage: 48 V, warranty duration: 12 months, remaining battery capacity: 90 %, Tested forklift battery for your forklift - 48V 6PZS 750AH - Special tray + 1 year warranty + incl. Aquamatik + incl. End conductor & REMA 320 plug (other plugs can be installed if needed) Guslhjwqx Eyjccqtec + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of delivery 2024 Dimensions: Length 984 mm Width 630 mm Height 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Still FM 20 Jungheinrich EFG 220 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFX 413 Jungheinrich EKX 410 Jungheinrich ESE 533 Toyota 8FBE16T Toyota 8FBE18 Toyota 8FBE18T Toyota 8FBMT16 Toyota 8FBMT18 Toyota 8FBMT20 Crown SCT 60 Atlet EF 180 Atlet EF 200. Atlet ET 180 Atlet ET 200 Atlet UHS Baumann EX 25-40 Caterpillar EP-FB18 Caterpillar EP-FB20 Caterpillar EP16 Caterpillar EP16/18PNT Caterpillar EP18 Caterpillar EP18/20 Caterpillar EP18/20KT Caterpillar EP18/20NT Caterpillar EP18KT Caterpillar EP18PNT Caterpillar EP20 Caterpillar EP20KT Caterpillar EP20PN Caterpillar EP20PNT Caterpillar F35 Daewoo B16 X Daewoo B16 X-5 Daewoo B18 T Daewoo B20 T Doosan B16X Doosan B16X-7 Doosan B18-5 Doosan B18T-7 Doosan B18T-AC Doosan B18X-5 Doosan B20T-7 Doosan B20T-AC Doosan B20T/X Doosan B20X-7 Doosan BT18T Doosan BT18T-5 Hyster H1.75XM Hyster J2.0XMT Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Komatsu FB18 Komatsu FB20 Mitsubishi FB16 Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB20KC Mitsubishi FB20KT Mitsubishi FB20NT Mitsubishi FB20PNT Nichiyu FB20P-60BC Nissan G1N1 Nissan G1N1L18 Nissan G1N1L18Q Nissan G1N1L18U Nissan GN01L18U Nissan GN1L16U Nissan TX16 Nissan TX18L Nissan TX20 Nissan TX20L Nissan TX4-18 Steinbock-Boss KE 20 UniCarriers TX4-20 Utilev UT20PTE Yale ERC 18 Yale ERC 20 Yale ERP 16 ATF Yale ERP 18 Yale ERP 18 ATF Yale ERP 20 Yale ERP 20 ATF Common battery sizes available, feel free to enquire. Transport possible.

Condition: used, Year of construction: 1990, operating hours: 9,855 h, Empty weight: 33.500 kg Dimensions (LxBxH): 627 x 392 x 345 cm Serial number: 596 Condition undercarriage: 60% Guslhccswrwx Ioqtec Caterpillar D8N Dozer, Delivered new in 1990, E-rops cab, 6 cylinder turbocharged Non-electronic Caterpillar 3406 engine with 328HP (244kW), 3 speed Non-electronic powershift transmission, differential steering, wrist control steering, Semi U-blade with tilt, new cutting edge, engine enclosures, undercarriage on average 60% remaining, 660mm track shoes, drawbar, extra auxiliary hydraulic functions, front and rear work lights, 33,500 Kg operating weight. Machine has new paint, comes straight out of work and is in clean condition. Inspections are welcome.

Condition: used, Year of construction: 2000, Bucket with teeth approx. 4.5 cbm, make: BOFORS, loading bucket without teeth, CAT 966E Guslhcewrvclecqtjc

Condition: used, Year of construction: 2000, operating hours: 14,471 h, 2000 | Caterpillar 963b | Used Tracked Loader | 14471 hours 📍Location: France, L'Isle-Jourdain 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 28800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 72 inspection points 68 approved ✅ 3 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Bulldozer in good general condition. Cabin shows signs of oxidation. Strong white smoke from exhaust and blowby pass. Oil on crankcase and under engine compartment. White smoke under engine compartment. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37120 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Gelhccqswqykqjtouc 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: refurbished (used), Functionality: fully functional, overall weight: 960 kg, Year of construction: 2024, total length: 1,035 mm, total width: 443 mm, total height: 784 mm, battery capacity: 620 Ah, battery voltage: 48 V, warranty duration: 12 months, remaining battery capacity: 90 %, Tested forklift battery for your forklift - 48V 4PZS 620AH - DIN B + 1 year warranty + Including aquamatic + Including end conductor & REMA 320 plug (other plugs can be installed if needed) + Capacity: min. 90-100% (C5 capacity protocol will be included upon delivery) + Year of delivery 2024 Dimensions: Length: 1,035 mm Width: 433 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde K - 5231-00 Linde K - 5231-00 - side change Linde K 10 - 148-00 Linde K 10 - 148-00 - vertical change Linde K 12 - 01 - 148-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal change Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal change Linde R 12 N - 136-00 Gjlhswqx Dpoccqtjuc Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - frontal change Linde R 14 N - 1120-00 - vertical change Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical change Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal change Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115-02 - vertical change Linde R 16 N HD - 1120-00 - frontal change Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - frontal change Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical change Linde V 10 E - 146-00 Linde V 12 E 01 - 146-00 - vertical change Linde V 12 E 02 - 146-00 - vertical change Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Common battery sizes available, please inquire. Transport possible.

Condition: used, Year of construction: 2016, operating hours: 4,400 h, Empty weight: 5.600 kg Dimensions (LxBxH): 555 x 190 x 248 cm Serial number: 406 Condition undercarriage: 40% Caterpillar 906M Compact Wheel Loader, Delivered new in 2016, E-rops cab with heater, Caterpillar C3.3B turbocharged engine with 75HP (55kW), Tier 3/EU Stage IIIA emission, 2 speed hydrostatic transmission, hydraulic quick coupler, 4-in-1 Multipurpose Cat bucket with bolt-on cutting edge, differential unlock, extra auxiliary hydraulic function, Dunlop SP T9 405/70R18 tyres, front and rear work lights, operating weight 5,600 Kg, CE marked. Machine comes straight out of work and is in clean condition. Inspections are welcome. Golhccewrmn Eeqtsuc

Condition: used, Year of construction: 2000, operating hours: 2,201 h, 2000 | Caterpillar 627F " Auger - Double Engin System" | Used Scraper | 2201 hours 📍Location: France, Boulazac Isle Manoire 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 198000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 24 inspection points 20 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31989 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Guolhccowqykdsqtsc

Condition: refurbished (used), Functionality: fully functional, Year of construction: 2024, battery capacity: 625 Ah, remaining battery capacity: 90 %, battery voltage: 48 V, total length: 998 mm, total width: 522 mm, total height: 651 mm, overall weight: 890 kg, warranty duration: 12 months, Tested forklift battery for your forklift - 48V 5PZS 625AH - Special tray + 1 year warranty + incl. Aquamatic + incl. end cell connector & REMA 320 plug (other plugs can be installed if needed) + Capacity: min. 90-100% (C5 capacity protocol will be included upon delivery) + Delivery year 2024 Dimensions: Length 998 mm Width 522 mm Height 651 mm Weight: approx. 890 kg Suitable for the following models and more: Gjlhcswqhvhscqtsuc Still RX 20-20 Jungheinrich EFG 318 EX Jungheinrich EFG 320 Crown SC Crown SC 3016 Crown SCT 60 Atlet ET 180 Atlet ET-15L Caterpillar EP16 Caterpillar EP16CPN Caterpillar EP16CPNT Caterpillar EP16KT Caterpillar EP16NT Caterpillar EP 18CPNT Caterpillar EP18E Caterpillar EP20NT Cesab BLITZ318/418 Daewoo B16 X Daewoo B18 T Daewoo B18 T-5 Daewoo B20 T Doosan B18 Doosan B18T-7 Doosan BT18 Doosan BT18T Doosan BT18T-5 Hangcha CPD25-J Hyster E1.50XM Hyster E1.50XMS Hyster J1.60XMT Hyundai 18BT-7 Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Hyundai 20BT-9 Jecam ELECTRO WAGEN Komatsu FB18 Mitsubishi FB16ACNT Mitsubishi FB16CPNT Mitsubishi FB16K Mitsubishi FB16KT Mitsubishi FB16NT Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB18NT Mitsubishi FB20PNT Mitsubishi FBS15 Mitsubishi FBS18 Mitsubishi RB14 Mitsubishi RB16 Nichiyu FBT15-18 Nissan AG1N1L20Q Nissan G1N1 Nissan TX16 Yale ERC 18 Yale ERP 18 Common battery sizes available, please inquire. Transport possible.

Condition: used, Year of construction: 1987, operating hours: 3,738 h, Empty weight: 12.365 kg Dimensions (LxBxH): 920 x 248 x 335 cm Serial number: 367 Condition undercarriage: 50% Guslhjwrmnrjccqtec Caterpillar 130G Motor Grader, Well maintained Ex-Government machine, E-rops cab, turbocharged Caterpillar 3304DI engine with 135HP (101kW), 6F-6R powershift transmission, differential unlock, hydraulic tip control, centershift, 12ft (3.65 Mtr) molboard with new cutting edge, rear ripper with full set of teeth, 14.00R24 tyres, engine enclosures, front and rear work lights. Machine has low hours, comes straight out of work and is in clean condition. Inspections are welcome.

Condition: used, Year of construction: 2022, operating hours: 2,038 h, 2022 | Caterpillar 395 | Used Tracked Excavator | 2038 hours 📍Location: Germany, Böblingen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 749000 or Make an Offer. Golhswq Ezzoccqtjuc Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 64 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine without issues. It has low amount of working hours and signes of working at demolition. Scissors are not included. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38250 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: refurbished (used), Functionality: fully functional, overall weight: 890 kg, Year of construction: 2024, total length: 998 mm, total width: 522 mm, total height: 651 mm, battery capacity: 500 Ah, battery voltage: 48 V, warranty duration: 12 months, remaining battery capacity: 90 %, Tested forklift battery for your forklift - 48V 5PZS 625AH - Special tray + 1 year warranty + incl. Aquamatic + incl. end cell connector & REMA 320 plug (other plugs can be installed if needed) + Capacity: min. 90-100% (C5 capacity protocol will be included upon delivery) + Delivery year 2024 Dimensions: Length 998 mm Width 522 mm Height 651 mm Weight: approx. 890 kg Suitable for the following models and more: Still RX 20-20 Jungheinrich EFG 318 EX Jungheinrich EFG 320 Crown SC Crown SC 3016 Crown SCT 60 Atlet ET 180 Guelhcowqhizjcqtoc Atlet ET-15L Caterpillar EP16 Caterpillar EP16CPN Caterpillar EP16CPNT Caterpillar EP16KT Caterpillar EP16NT Caterpillar EP 18CPNT Caterpillar EP18E Caterpillar EP20NT Cesab BLITZ318/418 Daewoo B16 X Daewoo B18 T Daewoo B18 T-5 Daewoo B20 T Doosan B18 Doosan B18T-7 Doosan BT18 Doosan BT18T Doosan BT18T-5 Hangcha CPD25-J Hyster E1.50XM Hyster E1.50XMS Hyster J1.60XMT Hyundai 18BT-7 Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Hyundai 20BT-9 Jecam ELECTRO WAGEN Komatsu FB18 Mitsubishi FB16ACNT Mitsubishi FB16CPNT Mitsubishi FB16K Mitsubishi FB16KT Mitsubishi FB16NT Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB18NT Mitsubishi FB20PNT Mitsubishi FBS15 Mitsubishi FBS18 Mitsubishi RB14 Mitsubishi RB16 Nichiyu FBT15-18 Nissan AG1N1L20Q Nissan G1N1 Nissan TX16 Yale ERC 18 Yale ERP 18 Common battery sizes available, please inquire. Transport possible.

Condition: used, Year of construction: 1992, operating hours: 374 h, Empty weight: 20.094 kg Guslhccqewqb I Dotjc Dimensions (LxBxH): 583 x 337 x 323 cm Serial number: 226 Condition undercarriage: 90% Caterpillar D7F Ex-Army Dozer, Only 374 Hours on meter! O-rops cab, 6 cylinder turbocharged Caterpillar 3306 engine with 208HP (155kW), Semi U-blade with tilt, 3 speed powershift transmission, undercarriage on average 90% remaining, 560mm track shoes, full set track guards, Hyster rear pulling winch, engine enclosures, work lights. Machine can be painted in Cat yellow at extra costs. Machine has low hours and is in very clean condition. Ripper available at extra costs. Inspections are welcome. Multiple units available from stock!

Condition: used, Year of construction: 2000, operating hours: 8,324 h, 2000 | Caterpillar 627F "Auger - Double Engin System" | Used Scraper | 8324 hours 📍Location: France, Boulazac Isle Manoire 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 198000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 39 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31975 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Gujlhcswqttxscqtoc

Condition: used, Year of construction: 1999, operating hours: 2,297 h, Empty weight: 14.200 kg Gslhccqowpd Tmsteuc Dimensions (LxBxH): 945 x 250 x 310 cm Serial number: 007 Condition undercarriage: 60% Caterpillar 12H Ex-Military Motor Grader, Delivered new in 1999, Only 2.297 hours on meter! Low profile E-rops cab with air conditioning, 6 cylinder turbocharged Caterpillar 3306DI Non-electronic engine with 165HP (123kW), 8F-6R powershift transmission, 12ft (3.65 Mtr) moldboard with new cutting edge, rear ripper with full set of teeth, scarifier, hydr. tip control, centershift, differential unlock, 14.00-24 tyres, 14,200 Kg operating weight. Machine has low hours, comes straight out of work and is in very clean condition. Machine can be painted in Cat yellow at extra costs. Inspections are welcome.

Condition: used, Year of construction: 2018, operating hours: 2,609 h, 2018 | Caterpillar 908M with quickcoupler, bucket and forks | Used Wheel Loader | 2609 hours 📍Location: Germany, Lemgo 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 39800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 53 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very well equipped unit with low hours for age. Guelhcjwqylbjcqtjc 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38987 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2019, operating hours: 8,830 h, 2019 | Caterpillar 930M High Lift | Used Wheel Loader | 8830 hours 📍Location: Germany, Mönchengladbach 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 42 approved ✅ 12 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: The machine requires significant attention to both aesthetics and engine/mechanical components. There is low RPM due to active failure codes. The computer readout is available to check the active failure codes. A small weld is present on the left-hand side (LHS). Further diagnostics and repairs are needed to address the hydraulic pressure and other issues. Only a limited test was performed due to the low RPM. 📄 Want to see the full inspection, extra photos, or a video? Gslhcowqyk Docqteuc Tip: The reference "38425 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2017, operating hours: 6,072 h, 2017 | Caterpillar M315 with 3 buckets | Used Wheeled Excavator | 6072 hours Gelhccswp U Eaeqteuc 📍Location: France, Gimont 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 95000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 53 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in perfect working order. Machine inspected on site. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38399 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2019, operating hours: 6,933 h, 2019 | Caterpillar 930M High Lift | Used Wheel Loader | 6933 hours 📍Location: Germany, Mönchengladbach 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Guolhccqowqttrstjc 👷‍♂️ Inspected by an independent expert 53 inspection points 41 approved ✅ 8 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: The machine had a removed wheel and could not be driven at the time of inspection. Since it was on a stand, the transmission test was not performed properly, but it does engage. There are ongoing repairs by the seller. A lot of aesthetic work is needed, along with some sensor replacements and smaller jobs to be completed. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38426 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1995, operating hours: 17,720 h, 1995 | Caterpillar 769 C | Used Rigid Dump Truck | 17720 hours | 144761 kms Guslhcowpyl Sscqtsc 📍Location: France, Commelle-Vernay 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 51 approved ✅ 8 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Good condition, a few leaks to be repaired, advanced wear on the bottom of the body. Comes with 2 extra tires and 1 rim. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33792 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.