Used Atlas-Copco Qas 45 for sale (26,130)

Condition: used, Year of construction: 1991, power: 2 kW (2.72 HP), HSM 45 Vertical Baler Power – 1.5 kW Year of manufacture ~ 1991 In good working condition! Crslowczz Isitudgjb The HSM baler is ideal for small quantities of paper, cardboard, and lightweight plastics and produces attractive bales measuring 700 mm x 500 mm x 450 mm.

Condition: excellent (used), operating hours: 2,658 h, Functionality: fully functional, pressing force: 71 t, bale weight: 600 kg, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale height: 720 mm, bale width: 1,100 mm, oil tank capacity: 1,250 l, net weight: 29,000 kg, nominal current: 200 A, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Crjlisu Thcvetudgeb Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: double-acting, stroke 45 mm -Piston rod: Ø 40 mm / thread M35 Cjlituev I Sdxsdgjrb -Mounting: Ø30/Ø25 mm / distance 330 mm -Dimensions: Ø 105 x 390 mm -Weight: 11.4 kg

Condition: used, Year of construction: 2007, Used truck DAF LF 45-220 fixed body + curtain and tarpaulin, 2 axles 4x2, year 2007, short cab, manual transmission, body length 6,700mm, total length of the truck 8,440mm, total weight 12,000kg, payload 6,570kg, rear air suspension, climate control, ABS, engine brake, Euro4, spoiler, sun visor, 80% rubber, electric mirrors + windows, radio, 870,000kg, good condition. Price 4,500 + VAT. Celituowcdk Sjdgsrb INFO ENG: Used truck DAF LF 45-220 fixed body + curtainsider and tarpaulin, 2 axles 4x2, year 2007, short cab, manual transmission, body length 6,700mm, total length of the truck 8,440mm, total weight 12,000kg, payload 6,570kg, rear air suspension, air conditioning, ABS, engine brake, Euro4, spoiler, sun visor, 80% rubber, electric mirrors + windows, radio, 870,000kg, good condition. Price 4,500 + VAT.

Condition: like new (used), Year of construction: 1998, operating hours: 300 h, Functionality: fully functional, machine/vehicle number: 9800491, Shaft size 30mm, -5 to +45 degrees, Aigner milling stop, table extension, Festo 3-roll feed, control panel, five speeds, left and right rotation, work switch, motor protection, shaft stop, manual, emergency stop, motor brake, CE approval Crsliou Egq Eotudgeb

Condition: used, mileage: 434,746 km, power: 162 kW (220.26 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,400 mm, overall weight: 7,490 kg, empty load weight: 4,620 kg, maximum load weight: 2,870 kg, first registration: 08/2002, next inspection (TÜV): 09/2025, loading space length: 4,000 mm, loading space width: 2,160 mm, loading space height: 500 mm, emission class: euro3, color: green, driver cabin: day cab, suspension: other, number of seats: 3, total length: 5,900 mm, construction height: 2,600 mm, fuel: diesel, Equipment: ABS, trailer coupling, - Rare MAN 8.224 L2000 6-cylinder, Atlas ARK52 A city roll-off tipper (articulated boom) - Including container, interior dimensions: 4m x 2.16m x 0.5m with 6 load securing eyes, net hooks, folding side walls, and a swinging/drive-over tailgate - Vehicle in one owner since 2007, MOT/AU 09/2025 - Euro 3 - ABS - Analog tachograph - Rear axle with air suspension - Manual transmission - Differential lock - Rotating beacon, work light, reversing light - Gross vehicle weight: 7490kg, NL 2870kg Creliewa D Nijtudgeb - Tires 235/75R17.5, remaining tread 6-7mm - Trailer hitch 11235kg with air connections + Duomatik - Hydraulic tipping connection for the trailer - Mechanical Extendable bumper - Subject to errors and prior sale... VAT deductible, ABS, trailer coupling, power steering, cab: local sales, hydraulic tipping, previous owners: 2, emissions class (NFZ): 71 Euro 3, diesel, rear-wheel drive, particulate filter sticker: 2 - red

Condition: good (used), Functionality: fully functional, conveyor belt length: 3,300 mm, conveyor belt width: 450 mm, Length: Diagonal 130 cm Horizontal 200 cm Width 45 cm Colisv Rbbrotudgorb Height of crossbeams 4 cm Two available! Price EUR 950 each!

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Celou Thypjitudgorb Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Functionality: fully functional, Year of construction: 1998, operating hours: 17,485 h, load capacity: 28,000 kg, lifting height: 5,820 mm, free lift: 2,960 mm, fuel type: diesel, mast type: duplex, construction height: 4,560 mm, fork carriage width: 3,060 mm, fork length: 2,540 mm, total length: 6,500 mm, engine type: Volvo, drive type: Diesel, construction width: 3,010 mm, net weight: 40,600 kg, Diesel forklift Load centre of gravity: 1200 Fork width: 280 mm Fork thickness: 110 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Front tires size: 14.00-24 Rear tires type: pneumatic Rear tires size: 14.00-24 Colitusu El D Dodgjrb Description: In addition to this Svetruck model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this 28120-45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin, full free lift,

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2018, Year of construction: 2018, Equipment: ABS, * Krone swap body chassis * 5 in stock * EZ: 09-2018 * As good as new * HighCube * Rear extension * BPW axles * Tires 445/45 R 19.5 Crjlitjwa Igrjudgeb * Extendable underride guard * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, Year of construction: 2012, CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 1400 run hours ! Available immediately. Cjlitec S S Spsudgerb

Condition: as good as new (ex-display), Year of construction: 2023, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Celitjwa Sugsudgorb Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: used, overall weight: 44,000 kg, empty load weight: 4,652 kg, maximum load weight: 39,348 kg, axle configuration: 3 axles, wheelbase: 7,400 mm, first registration: 03/2023, next inspection (TÜV): 03/2026, suspension: air-lift, tire size: 385/65 R 22.5, Year of construction: 2022, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Axle manufacturer SAF, anti-spray, disc brakes, air-lift suspension, lifting and lowering, lift axle 1st + 3rd axle, 2x extendable (center and rear), suitable for: 45' containers, 40' containers, 30' containers, 2x 20' and 20' containers flush with the rear, 15 + 2x 7-pin connectors, 2x LED work lights at the rear, chassis height and fifth wheel height: 1,110mm, large plastic toolbox, 2 x 3-chamber lights, 2 x LED reversing lights, ADR, available immediately Coliewam Nretudgjrb

Condition: good (used), mileage: 791,413 km, power: 184 kW (250.17 HP), first registration: 01/2010, fuel type: diesel, axle configuration: 4x2, tire size: 245/70R17.5, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2010, Equipment: ABS, air conditioning, tail-lift, = Additional Options and Accessories = - Power Brakes - Power Windows - Power Mirrors - High Beam - Speed Limiter - Radio/CD Player - Sunshade - Toolbox Crolievi Rmhjtudgjb = Remarks = Refrigerator Brand: Carrier = Additional Information = Technical Information Number of Cylinders: 6 GVW: 12,000 kg Drivetrain AdBlue System: Yes Transmission Transmission: ZF, Manual Transmission Axle Configuration Tire Size: 245/70R17.5 Brakes: Disc Brakes Front Axle: Steered; Left Tire Profile: 40%; Right Tire Profile: 40%; Suspension: Leaf Spring Rear Axle: Left Tire Profile: 40%; Right Tire Profile: 40%; Suspension: Air suspension Functional Tail lift: D'Hollandia DHSM80, 1500 kg Cooling: -18°C to 20°C Refrigeration engine: Diesel and electric Condition Technical condition: Good Visual condition: Good Damage: None Further information Contact GERMAIN DAENEN or the office for further information.

Condition: excellent (used), Year of construction: 2016, 5 axes CNC glass working center for max. glass sizes 4050 x 2300 mm machine fro grinding , milling , drilling , bevelling 0-90° , engraving and sawing max. thikness peripheral wheel : 80 mm electro spindle : 15 Kw electro spindle spindle speed : 12000 rpm 2 x 14 positions rotating tool change store left + right + 8 postions tool change on heads board ( next to the electro spindle ) Crolitujv U Abzsdgsb tool rack iso 40 weight : 7500 Kg

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, motor voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Cjlitovxu E Heudgsrb Extraction connection Extraction nozzle diameter 2 x 200 mm Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Height min. 4 mm Height max. 170 mm

Condition: like new (used), Functionality: fully functional, Year of construction: 2023, machine/vehicle number: MC-304-ATLAS-8m, 4 CNC-controlled axes for efficient machining of aluminum profiles or workpieces made of aluminum, light metal alloys, and steel. Dealer inquiries welcome! Suitable for 3- or 5-sided machining Milling spindle 5.5 kW, S1, 18,000 rpm with ISO 30 tool holder Automatic tool magazine with 8 positions For drilling, milling, and threading tools, angle heads, and disc milling cutters Key features of the new MECAL technology Crolitudjv U T Ursgob High travel speeds Optimized travel paths through interpolation of all axes Optimized troubleshooting during service thanks to new CN software Operator software CAD/CAM in 3D technology

Condition: excellent (used), Year of construction: 2017, operating hours: 1,208 h, power: 35 kW (47.59 HP), mast type: telescopic, fuel type: diesel, color: other, General information Year of manufacture: 2017 Technical information Drive: Wheel Engine type: Deutz D 2011 L 03 Empty weight: 6.953 kg Dimensions (LxBxH): 848 x 230 x 249 cm Functional Lifting capacity: 227 kg Working height: 1.600 cm Maximum reach: 1.120 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good General Cslov Ucqvsitudgjrb Country of production: USA Condition CE type: CE

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 45 mm arm length 325 / 1000 mm workpiece height max. ca. 1000 mm spindle taper MT 4 spindle turning speed range 40 - 1700 U/min feeds 0,125 - 1,25 mm/U distance spindle/base plate 385 / 1400 mm quill stroke 325 mm Crjljvh Nb Isitudgjb crossrail adjustment vertical 700 mm 360 ° boring head horiz. adjustable 675 mm base plate surface area 1300 x 800 mm total power requirement 6,2 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 2,30 x 0,98 x 2,82 m - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant

Condition: used, Year of construction: 1998, turning length 3500 mm swing diameter 1000 mm centre height 500 mm turning diameter over slide 600 mm weight of the machine ca. ca. 8,5 t including 2 lynettes and 900mm faceplate Cjlituov Hhv Iedgsrb

Condition: used, mileage: 434,500 km, power: 176 kW (239.29 HP), first registration: 02/2005, overall weight: 14,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2005, Equipment: ABS, air conditioning, all wheel drive, crane, * Euro Cargo 140 E 24 W * Single tires 4x4 all-wheel drive * Atlas loading crane AK 65.2 A1 * Grab and rotary servo control, * Grab and rotary servo control 5th + 6th control circuit * Meiller 3-way tipper * Driver's cab rear wall with window * Main mirror outside electrically adjustable * Steps for construction site vehicles * Trailer coupling "Rockinger" * Roof hatch/roof ventilation flap * Tachograph * All-round light (yellow) * Outside sun visor * Leaf springs * Empty weight 5830 KG * Total vehicle length 6800 mm * Width 2550 mm * Height 3550 mm * 3 seats passenger bench * Halogen headlights * ABS * Disc brakes * Reinforced stabilizers on front and rear axles * Differential locks front and rear axles * Adjustable steering column * 6-speed gearbox * PTO dependent on gearbox Crelitudst Drzxogob * 115 L diesel tank * Trailer brake system * 3690 mm wheelbase * Air conditioning * Electric. Windows and mirrors * Radio * 395/85R20 15 mm front axle and 15 mm rear axle * Driver's seat with air suspension and heating * Lumbar support * Front bumper with tow bar * 1 previous owner * 2 vehicle keys * and much more * !!! Errors, changes and prior sale reserved !!!

Condition: used, Functionality: fully functional, Year of construction: 2025, fuel type: diesel, power: 33 kW (44.87 HP), engine type: Kubota, drive type: Diesel, Yard loader Technical condition: New Front tires type: Pneumatic Crjljumy Aisitudgeb Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, Pallet forks 3rd valve, 4th valve, Pitbull Compact loader X27-45CRT 45hp Kubota 4 cylinder CRT Trelleborg 400/50-15 T463 EURO mount Halogen lighting kit LED work lights left and right rear piece LED bar front piece License plate holder with lighting 1x DW, mechanically operated + 1x DW, electrically operated via button on joystick Incl. mechanical switch with bucket lock 3rd function Inching deflector, controllable via joystick Combi trailer coupling, ball and pin 12 volt connection for trailer lighting rear

Condition: excellent (used), Year of construction: 1980, Westfalia Separator SA 40, used in beverage industry, in excellent condition. Crelijq U Dbpjtudgsb

Condition: excellent (used), fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: EMI, Axial fan Axial fan Crjlitequftdeudgeb -Fan motor:Type: 82D-2010/XX -Voltage: 220V / 50/60 Hz -Power: 10/45 W / 1300/1550 rpm -Impeller: Ø 200 mm -Protective cage: Ø 255 mm -Mounting hole circle: Ø 285 mm -Overall dimensions: Ø 305 x 95 mm -Weight: 1.6 kg

Condition: used, mileage: 434,500 km, power: 176 kW (239.29 HP), first registration: 02/2005, overall weight: 14,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2005, Equipment: ABS, air conditioning, all wheel drive, crane, * Euro Cargo 140 E 24 W Crelitudst E D Tcegeb * Single tires 4x4 all-wheel drive * Atlas loading crane AK 65.2 A1 * Grab and rotary servo control, * Grab and rotary servo control 5th + 6th control circuit * Meiller 3-way tipper * Driver's cab rear wall with window * Main mirror outside electrically adjustable * Steps for construction site vehicles * Trailer coupling "Rockinger" * Roof hatch/roof ventilation flap * Tachograph * All-round light (yellow) * Outside sun visor * Leaf springs * Empty weight 5830 KG * Total vehicle length 6800 mm * Width 2550 mm * Height 3550 mm * 3 seats passenger bench * Halogen headlights * ABS * Disc brakes * Reinforced stabilizers on front and rear axles * Differential locks front and rear axles * Adjustable steering column * 6-speed gearbox * Air conditioning * Seat heating * Auxiliary drive depending on gearbox * 115 L diesel tank * Trailer brake system with red, yellow and Duomatic brake connection * Trailer hydraulics * 3690 mm wheelbase * Electric. Windows and mirrors * Radio * 395/85R20 15 mm front axle and 15 mm rear axle * Driver's seat with air suspension and heating * Lumbar support * Front bumper with tow bar * 1 previous owner * 2 vehicle keys * and much more * !!! Errors, changes and prior sale reserved !!!